Having problems with your Honda Maxus Prosumer MX5223 Pressure Washer ?

Tipe of oil and quantity for 6.0hp 2750 psi (xr2750)


Answers :

Any sae10w-30 will do, 5.3litre of if you prefer 5.6us quarts.

manual is available on this site:
http://www.cpocampbellhausfeld.com/maxus_tools/pressure_washers/mx5223_spec.html

if you find my advice helpful, please do not hesitate to comment and vote4 for me, thanx!

Repair Help & Product Troubleshooting for Honda Maxus Prosumer MX5223 Pressure Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Tipe of oil and quantity for 6.0hp 2750 psi (xr2750)


Any sae10w-30 will do, 5.3litre of if you prefer 5.6us quarts.manual is available on this site:http://www.cpocampbellhausfeld.com/maxus_tools/pressure_washers/mx5223_spec.htmlif you find my advice helpful, please do not ... Honda Maxus Prosumer MX5223 Pressure Washer

North star eletric hot 2000 psi 3.5 gal per min oil pump had blown shaft seal. replaced with new pump. put small allen plug in return port. I have oil flow to the pump but none comes out port leading to burner even with shutoff switch removed and pump turning. Installed test gage 0 pressure. Took off bypass line and ran into can. pumps small amount of fuel into can that way but with uneven flow & small bubbles. nomatter what I do I just can't get fuel outlet port to burner. pump # A2VA-7116 pl


... Northstar Pressure Washers

I have a power washer, craftsman &.0 horsepower, 2900 psi, 2.3 GPM model number 580.752410. i was starter to wash my car, and stops? i change the spark plug, andput new oil in there. still do not working. some one helme in this problem.


... Craftsman 3000 PSI 27 GPM Briggs Stratton Powered Pressure Washer

I have the John Deer 3800 psi from lowes. The machine is in great running order it just seems to be losing psi as I use it. Also checking the oil in the Honda 13hp motor and in the pump. Do you take the dipstick out and then insert it Not screw it back in to check the oil? The motor has 2 places for oil 1 on each side?


Thread the dip stip back in to get a true reading of the oil level. Either oil filler may be used to top off the crank case. There is only one crank case - the oil on one side is the same oil seen in the other filler. ... Briggs & Stratton Pressure Washers

What oil does my troybuilt pressure wash use, its 4.5 hp unleaded gas 4500 psi? it just stalled while i was using it looked like oil was low, i have no manual and there was no info on unit so i added 10w-30 regular motor oil now engine wont start?


There is no way that a 4.5 hp engine can create 4500 psi. If you are putting the oil into the engine it would just take a 10w30 motor oil, if you are putting oil into the pump I would have to know what pump kind of pump you have, if the name isn't on ... Briggs & Stratton Pressure Washers

My BE Honda 5.0 2900 psi pressure washer has oil in air filter. I believe it is because my buddy left it tilted to the side in th ecar when he borrowed it. How can I fix it? It is probably low on oil as now due to this. How much oil does it take? As there is no dip stick to check the level, Do I need to empty it all out and refill it


Hi there ibharti sounds like gx 160 honda ohv engine \015\012\015\012replace the air filter if it has been wet with oil, , remove the float bowl and check for oil in the carb, blow the jets out, top up the oil to the point o ... Honda Pressure Washer PSI 3000

Oil I have a Briggs and Stratton 2200 psi pressure washer. It doesn't specify an oil ~ other than to show a photo of synthetic pressure washer oil manufactured by them. I can't find that specific brand anywhere, what can I substitute it with? Ace hardware was stumped.


Remember when your searching for something you can't find the internet is always your best bet. You should also use a good search engine; www.bing.com is one of the best search engines I have ever used. I searched some stores that have the oil your l ... Briggs & Stratton Briggs Stratton 2000 Psi Pressure Washer Freeshp

I have a Coleman powermate clean machine pressure washer 2500 psi 2.36gpm and has a 6x200 honda 6.5 horse motor. I just bought at a garage sale.It started just fine when I got home and in less that 2 minutes quit. It says the engine will stop automatically when low on oil. what kind of oil should I use and for the pump what kind of oil do you use?


... Coleman Pressure Washer PW0881800

Why is oil coming out the side of my pump, I just changed the oil and it started doing this? I own a Porter Cable 4,000 PSI.


You didn't state your model number so I don't know exactly which type pump you have. With that; there is no 'oil pressure' in power washer pumps. The internal parts work in an oil bath/splash environment and the pump body is vented, usually at the ... Pressure Washers

What of oil to change on the 2700 PSI Brigg &


Id your engine model and consult the briggs site........the oil in the pump is filled during assembly so it doesn't have a nice pair of fill and drain plugsbriggs : ... Pressure Washers

Change oil on karcher 1900 psi - Karcher 2500 PSI Pressure Washer


... Karcher 2500 PSI Pressure Washer

I have a John Deere 3800 psi pressure washer, it stopped having pressure in the middle of a job. No restrictions and still turns on and sounds great. Checked pump oil and it was a milkshake green. Changed pump oil and still doesn't have pressure.


... Pressure Washers

Cannot figure out how to remove the oil plug to drain the oil. Label points to a spot that looks like it might be a plug, but can't figure out how to remove it. It is a 2500 psi Mdl VR2500 Briggs & Stratton engine Honda Power Washer. Ken from NH


Should take a 3/8" socket extention ... Pressure Washers

Have just bought a Jet USA pressure washer Model JU-200ptb , which according to the manual has no engine oil in it and tells us to install the correct oil type and quantity . Unfortunately in the user manual there is no where which tells us what this is . Can anyone assist ?


... Pressure Washers

Dewalt model #4200 psi pressure washer oil - Dewalt DXPW4240 - 4200 PSI Professional Gas-Cold Water Pressure


... Dewalt DXPW4240 - 4200 PSI Professional Gas-Cold Water Pressure

Shooting oil out of the oil cap area - Northstar Pressure Washer 3000 PSI


... Northstar Pressure Washer 3000 PSI

I have DeWalt3750 psi pressure washer, its been long time since I used it, now that I wanted to use it, I can not start it. I already changed the oil and filled it up with new oil but still can not start, What is wrong with the washer? thank you


Here is the long answer with everything we learned while using a power washer twice a day for years::This assumes you did not turn power washer over or on its side to drain oil, or dirty oil will flow into carburetor requiring complete carburet ... Dewalt 3800 PSI Pressure Washer

What oil do i use to chane oil - Briggs & Stratton 2200 PSI Gas Pressure Washer


For normal usage I would reccomend straight 30 weihgt oil.If you are planning on using it during colder temperaturesI would switch to 10w-30. thanks ... Briggs & Stratton 2200 PSI Gas Pressure Washer

I need to know what kind of oil the pressure washer takes, I noticed it has a place for oil on the engine and another neat the pump. The product is a honda pressure wave 220 PSI Model NO 2225cwh-2


... Honda Maxus Prosumer MX5223 Pressure Washer

Started by Craftsman 2700 PSI , 2.3 GPM Briggs & Stratton Powered Pressure Washer for first time in 9 months. Added new oil, and gas. started but is smoking from muffler and is dripping what appears to be oil near the exhaust end. I shut it down. What could this be due to?


The first thing I would check would be the oil level, to make sure you didn't put in too much oil. If the oil level is correct, it could be a stuck piston ring, letting oil blow by the piston, and out the exhaust. If this is the case, you are going ... Craftsman 2700 PSI,2.3 GPM Briggs & Stratton Powered Pressure Washer - Ca. Model

My Karcher 2400 PSI pressure washer is not starting after about 5 years. What type of spark plug and gap should I change the old out with and what kind of oil do you recommend. I don't think I have ever changed the oil but way less that 50 hours on the machine. Thanks


... Karcher 2500 PSI Pressure Washer

What type of oil do a troy-bilt 3000 psi? - Honda Pressure Washer PSI 3000


30 weight ... Honda Pressure Washer PSI 3000

Craftsman Pressure Washer 2.7 GPM 3000 PSI. Stopped working, found no oil, added oil now washer will not start, can't even pull the cord. Help


... Pressure Washers

I have Honda power washer 3000 psi...i bought new red cap for oil and oil is coming out red cap on cat pump


... Pressure Washers

How to fix an oil leak in my Task Force 2000 psi Pressure Washer


... Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0380 seconds