Having problems with your Honda Pressure Washer PSI 3000 ?

Changing engine oil on a gx390 engine for pressure washer excel

\015 Can't find the place to change the oil\015

Answers :

On the very bottom of the motor is a square plug to drain the oil. The machine must be elevated to allow the oil to flow into a drain pan. If you don't see a square plug then look for a small 1/4 inch tube coming from the bottom of the crankcase with a hex cap on the end of it. If you cannot find either of these, then you must turn the pressure washer on its side and drain it through the same plug you fill from.
Repair Help & Product Troubleshooting for Honda Pressure Washer PSI 3000

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Changing engine oil on a gx390 engine for pressure washer excel


On the very bottom of the motor is a square plug to drain the oil. The machine must be elevated to allow the oil to flow into a drain pan. If you don't see a square plug then look for a small 1/4 inch tube coming from the bottom of the crankcase with ... Honda Pressure Washer PSI 3000

Excell 2500 Psi Pressure Washer with Honda Engine, How do i change the oil?


... Karcher 2500 PSI Pressure Washer

My Troy Bilt power washer (using Honda GCV160 engine) has no pressure coming from the pump. I checked the water flow, everything seems fine. I believe the pump needs oil added, however, I can't seem to firgure it out (how to add oil to the pump). I did notice that previously, I used to see drops of oil coming from under the pump. I I have a bad seal, can I add oil and test the pressure before I change the seal? Please advise.


I had a similar problem. Turns out I had left the hose disconnected and some sort of wasp built a paper type nest inside the washer tube that the hose connects to. I had to take the pump off and take apart and then cleaned it out with a screw driver. ... Honda Black Max 2600 PSI Pressure Washer

I have a troy build pressure washer model number 020337 Do I need to change the oil in the pump, and if yes how do I drain it and what kind of oil. I know how to change the engine oil


The pump requires no maintenance and no oil change. It is lubricated for life. ... Karcher 2500 PSI Pressure Washer

Excell vr2500 pressure washer ,no pressure, took off high pressure hose at bottom of washer , get water flow, but flow does not change when engine is running full throttle


Check the water filter ---high pressurehose must have bbackpressure to develop pressure so disconecting it wont acheive ,much ,if you have agood water supply ,oil in the pump--- adjust pressure by srewing the brass fitting that the pressure hose atta ... Pressure Washers

Changing oil in 1750 psi excell pressure washer


... Briggs & Stratton Pressure Washers

I have an excel pressure washer 11 hp Honda engine. water is leaking into the cat pump 4hp40gl causing the oil to become milky, after the washer sits overnight the oil clears up. Any and all help will be appreciated. Thanks


... Caterpillar Cat Pump Pressure Washer Pump 3SP30G11

I have a Honda Excel Pressure washer with 5 hp engine. I just started using it for 5 - 10 minutes and the engine stopped running. I can't pull the cord to turn over the engine. Ithas plenty of oil, I disconnected the hose and the wand and still can't get the engine to turn over.What next?????


... Pressure Washers

I have a Karcher g 2500 vh gas pressure washer and I can't find what oil to use when changing the engine oil. It's not in the owner's manual that I down loaded and I'm not able to find this info on the internet... Can you help?


... Pressure Washers

What type of oil do I use for the 2550PSI pressure washer engine and how do I change the oil completely?


To empty the oil you tip it over on it's side. The type of oil to use is car oil and depends on the temperature where you live. The manual is available at http://staging.us.kohler.spectracom.com/pdf/owners_manual/101%5C020273_0_om-Domestic.pdf and ... Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer

What kind of oil do you put into a Excell pressure (exh2425) washer pump? Do you use the same as engine oil (30 w)?


Pressure washer oilI took this picture of my power washer so it's easy to explain the oil.The ... Pressure Washers

2700 Series Presser Washer, and I need to change the "engine" oil. There on two oil "yellow" fill point, and the manual talks about changing the pump oil. How exactly do I change the engine oil?


Look for a drain plug on the base of the engine.Take the fill cap off also, and it'll drain easier. ... Briggs & Stratton Prosumer 20324 Gas Pressure Washer

I have an Excell VR2500 pressure washer with B & S 6.5 HP engine. It was running fine, but then stalled out and now will not start. Has clean gas and full oil. I pulled the spark plug it is producing a sufficient spark when starter cord is pulled. Any ideas what might be causing the problem? Please help.


The key things to check are the spark plug, the air filter, the fuel. If those are all new and in good shape then you probably have gum in the carburator. Get a can of starter fluid and a helper. One person squirt the starter fluid into the air in ... Briggs & Stratton Pressure Washers

How to change engine oil in karcher pressure washer


... Karcher 2500 PSI Pressure Washer

Good day ; I have a simoniz s2500 pressure washer,mitsubishi 6.0 hp- gt600 engine , how do i change the pump oil ? there is a plug on the top [ grey plastic ] thanks for any help c jackson.


... Pressure Washers

I have excell 3700 pressure washer...the pump cover vibrated loose lost oil and cam melted.how do i get parts and change pum cam?


When you get down to it, purchacing oil end parts for a pressure washer is not cost effective.\015\012\015\012The crank(cam) shaft runs about 280.00 dollars. The oil seals, new bearings, possibly new pistons and almost definatly new seals ... Psi PowerBoss 20262 Pressure Washer

How to change oil Karcher (Robin engine) 2600 PSI Gas pressure washer


... Karcher G 2600 VH Gas Pressure Washer

I have a model PW 2200 gas pressure washer. It suddenly lost it's high pressure the other day after working fine for @10 minutes. It's getting plenty of water, but the engine doesn't seem to rev up to give it the high pressure. The operating instructions say to check the oil in the engine, and the PUMP before starting, but I haven't found any place to check for an oil level in the pump????Any ideas, I'm very confused.


... Pressure Washers

Hello, I own a Honda Pressure Washer (Porter Cable Model) with a Cat pump 2600psi and 6.5 hp. An Excellent machine for the past 7 years. Last fall I noticed it was not producing the full pressure but still Engine was running strong. This past weekend. started it up and used it for about 1 hour still with minimal pressure at full throttle. Then pressure was totally cut off. I stopped and started the engine the engine and it had minimal pressure again. Same thing happened again. I stopped the engi


... Honda Pressure Washers

I have a 5HP Honda engine installed on a Excell pressure washer. While the engine readily starts, it will not continue to run unless I keep the choke setting nearly completely closed. When I activate the pressure gun, it seems to generate adequate pressure, however, when the trigger is released, the engine continues to run at the same rpm instead of the normal variable rpm that most engines operate at during idling periods. The engine will always cease running when I push the choke rod all the w


... Honda Pressure Washers

PRESSURE WASHER WON'T PUT OUT FULL PRESSURE WHEN SQUEEZING TRIGGER, THIS HAPPENED A OF A SUDDEN. USUALLY WHEN THE TRIGGER IN THE HANDLE IS SQUEEZED THE ENGINE NOTE CHANGES & THE PRESSURE GOES UP. NOW THE ENGINE SPEED STAYS THE SAME & PRESSURE GOES UP SLIGHTLY, NOT ALL THE WAY.


... Pressure Washers

I have a John Deere 3800 psi pressure washer, it stopped having pressure in the middle of a job. No restrictions and still turns on and sounds great. Checked pump oil and it was a milkshake green. Changed pump oil and still doesn't have pressure.


... Pressure Washers

Change oil in craftsman 6.75 hp pressure washer


... Pressure Washers

2050 PSI Gas Pressure Washer - 20244: my excell pressure washer wont start. pull start t...


... Briggs & Stratton Gas Pressure Washer 20244

Changing oil on a high pressure washer with Comet Water Pump


... Comet BXD2527 Pressure Washer Pump
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1054 seconds