Having problems with your Honda Pressure Washer PSI 3000 ?

Honda GX340 11 Hp ..Runs fine until it gets hot , Cuts off and

\015 Won't start until it cools off..What is happening? I have the same problem but now even cold it won't start & no spark to plug.\015

Answers :

FIRST...check the engine oil level. Some Honda engines have an oil sensor that shuts off the spark if the oil is low. This would also explain it shutting down when it get hot. Check the manual to see how to tell if the oil level is correct. Also, the oil should be brown and transparent, not black. It may need changing.\015\012\015\012Post again if this doesn't help :-)
Repair Help & Product Troubleshooting for Honda Pressure Washer PSI 3000

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Honda GX340 11 Hp ..Runs fine until it gets hot , Cuts off and


FIRST...check the engine oil level. Some Honda engines have an oil sensor that shuts off the spark if the oil is low. This would also explain it shutting down when it get hot. Check the manual to see how to tell if the oil level is correct. Also, ... Honda Pressure Washer PSI 3000

Honda GX340 11 Hp ..Runs fine until it gets hot , Cuts off and


Have you checked the oil level? ... Honda Pressure Washer PSI 3000

It runs fine until it gets hot, then it cuts off and won't start


What tpye of detergents do you recommend ... Honda Pressure Washer PSI 3000

Excell pressure washer 2600 5hp honda runs bad when it gets warmed up then just cuts out


... Pressure Washers

My dishwasher gets stuck on Hot Start option. It runs fine otherwise, but every time I use the hot start option, it just keeps running and won't automatically run through the entire cycle. I manually have to come back and turn the knob.


... GE Dishwashers

My Professional series dishwasher does not work properly. It is only 1.5 years old and glasses on top rack get sprayed with fine layer of particles every time I use it. Other items, top and bottom, are often not clean as well, but glasses are the hardest to re-clean. I have tried evacuating the water left at the bottom of the dishwasher before running, pre-running the hot water in the sink and ensuring that the disposal was run, removing and cleaning the filter at the bottom of the washer. None


Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... Frigidaire PLD4375RFC Dishwasher

I have a excell 2500 psi max honda 5.5 ho vr2522 2.2 gpm presser washer and has been stored for about a year, still looks brand new and has only been used twice before, it has oil and was stored with no gas in the tank, i put fresh gas in the tank and blead the fuel bowl until fuel ran out like it should, the washer wont start, ive checked the turn on switch as well and the fuel cut off knob, i spayed gas in the carb and it fired up but stopped running as fast as it began to run, its not getting


... Honda Black Max 2600 PSI Pressure Washer

Honda 3540CWHP cannot get water to spray with or without motor running. I have cleaned the filter and motor runs fine still no water? Help! Gary


... Pressure Washers

13 hp honda pressure washer 3000 psi 4gal/min Hard to start and dies out after 20 seconds after the engine gets hot and running after multiple starts the engine will stay running but then dies every 30 minutes


There are a couple of things that can cause this problem. The first thing to check is if you are loosing spark. Dying after it gets hot sounds like to stater is failing in the engine. If you loose spark this is more than likely the issue. If you are ... Honda Landa PG 3500 PSI Pressure Washer

2-yr old troy-bilt pressure washer with honda gcv160 engine. seems to run well, but when trigger is pulled get full pressure for less than 5 seconds before reducing to house water pressure. when left running, looks a black plastic pressure relief valve starts blasting hot water. appreciate whatever insight you can give. Thx


It sounds like an air lock. Try this: With the machine off, connect the hose to the washer and let it run for several minutes to get all of the air out of the hose, and to purge any air out of the pump. Shut off the water, and connect the high pre ... Briggs & Stratton Pressure Washers

Honda gas power pressure washer runs for awhile then cuts off.


Did you pour all of the old gas out before you started to use it. Sometimes condensation builds up in gas tank when stored. You need to dump old gas an put in new gas. ... Honda Karcher G4000RH Pressure Washer

Honda 8hp gx240 stops running after getting hot


... Honda 8 HP Engine

The dishes are not getting clean.  Especially the top rack.  The top part of the door is not even clean after I run the machine.  Everything seems to be spinning fine and everything is hot when it finishes a cycle.


Open and clean pump and passages and spray arns ... Dishwashers

My honda gx motor labous when i pull the lance lever,so i cant get full pressure, i have changed the plug,and cleaned the carb,it runs fine on idle, it has a interpump w73, but i dont think its the pump at fault


Check the govenor and make sure that it is free to move ... Honda Pressure Washer PSI 3000

My maidaid runs fine but the water is not getting hot


... Maytag MDB7100AWB Dishwasher

My Miele dishwasher is about 16 months old. Initially it was awesome. Now it doesn't get anything truly clean on any rack. Every item has scum and traces of food or drink left on it. I've cleaned the filter and the no-return valve, and refilled the salt (yes, I used the right one) and rinse aid. The manual has no other instructions to remedy dirty dishes. The water is hot, and the machine seems to be running just fine. Where should I look for a problem?


The other possible problem is that the spray arms have small bits of food (sesame seeds are nasty!) stuck in the holes. Take the arms off and flush them out. You might need to poke out seeds that are stuck in the holes. ... Miele G880 Dishwasher

Troy- Bilt pressure washer #020209 , 7.25 Briggs & Stratton, AR water pump #SJV 3G27-1. Boggs down an cuts off acts as if motor is getting tight with wand in use or not. After shut down its easily starts up an repeats itself. Removed pump motor runs fine.


... Briggs & Stratton Power Products 1539 Pressure Washer

Dishwasher stench It's BAD. I had the dishwasher guy out - there's nothing in the filter. He said everything was fine - run shome dishwasher cleaner thru it. We tried that - no good. I looked online and saw there should be a loop in the hose (there was not). I got that taken care of. That guy said run some bleach thru it after and we'd be fine. I did. Still stniks. It's okay right after we run it, but gets skanky in about 2 days after running. I had another plumber today for something else. he s


You might have luck with some enzime cleaners,some washing liquid comes with it,have you tried bakeing soda? the in side is made of plastic . ... LG 24 in. LDS 5811ST Stainless Steel Built-in Dishwasher

Why cant i get h2o to come out of my honda pressure washer? i disconnected hose, and no flow..was just workin fine other day


... Troy-Bilt 020528 Gas Pressure Washer

Honda pressure washer 5hp will only run with the choke on. Was running fine for about 1 hour


Always burn FRESH number 1 fuel in this engine and make sure there is a screen on the spout of the can or plastic jug. ... Pressure Washers

I have a SHU43C05UC/22 Bosch dishwasher that runs fine till it gets to wash then it seems to stick there. the timer times down to 1 and it stays there for a really long time. it doesn't appear that the washer ever gets out of the wash cycle. when you stop/open the door there is still soapy water in the tub. You can cancel the program and it will drain the tub fine then you have to select rinse and hold to clean out the soap out.


... Bosch 24 in. SHU43 Built-in Dishwasher

Kenmore dishwasher. The upper rack is not getting clean. Even very light residue remains. And, detergent is left in door at end of cycle. The bottom is filling up, so I don't think it's the intake valve. Also, all the blade openings appear clear. I am noticing that hot water is not filling the dishwasher when I first run the cycle. Even if I have hot water running in the sink, the dishwasher fills with cold or warm water. So, I think this is the problem. What should I do? Thank you in advance!


I find it odd that the dishwasher is filling with cold water if the water is hot at the sink. It sounds like the dishwasher is connected to the cold water line rather than the hot. Check under your sink; if you've got standard plumbing, the dishwas ... Dishwashers

I have a dewalt model 67DX39G1l. Used it fine for a couple of years.Went to used it the other day and the water hose leading to it was getting so hot that it melted it.Found ot the pump gets scolding hot only after you release the trigger.As long as the trigger is pulled it works fine.If anybody can help me with this problem,please let me know.


... Dewalt Pressure Washers

Kenmore 665.16529000 When we put the dial to pots and pans the diswasher fills up and cycles through, when the dials moves to normal wash, it fills up and cycles through again. When the dial gets to light wsh we can hear the motor running but nothing is happening, but the soap door opens soon after. The heating light comes on and the inside of the dishwasher gets so hot that it has melted our big plastic tumbler cups on the top rack and makes the counter top extremely hot to the touch. The dial


... Dishwashers

Hi there, Ok, i think i'mHi there, Ok, i think i'm getting close to solving this problem. I have an LG dishwasher- Model # LDS 5811ST. I have stripped it down and clean all hoses etc. It is running fine through all the cycles. The only problem is that it has no water pressure. In other words water is pumping into the More Hi there, Ok, i think i'm getting close to solving this problem. I have an LG dishwasher- Model # LDS 5811ST. I have stripped it down and clean all hoses etc. It is running fi


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. In\015\012this case you’ll need to check the water inlet valve. Disconnect the power\015\012source to dis ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0996 seconds