Having problems with your Honda Pressure Washers ?

Doesn't retain its high power pressure for more than about 10 minutes and then it goes to being like a regular hose. Usually never regains that power unless I leave it off for a long time and sometimes even then it doesn't recover.


Answers :

The pressure washer may need new gaskets. When these fail, then you get the same result. The gaskets are available online, and at a Honda dealer.
Repair Help & Product Troubleshooting for Honda Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Doesn't retain its high power pressure for more than about 10 minutes and then it goes to being like a regular hose. Usually never regains that power unless I leave it off for a long time and sometimes even then it doesn't recover.


The pressure washer may need new gaskets. When these fail, then you get the same result. The gaskets are available online, and at a Honda dealer. ... Honda Pressure Washers

We have had our dishwasher for quite a few years, and all of a sudden (within the past month), it has been leaving a gritty white powder on the dishes. We tried other soaps, and putting less soap in. We even tried putting rinse aid liquid in (which we've never had to use before), but it is still leaving the grit. What can we do to fix it? It is a Roper RU4300DQ3.


1)scaling in the boiler tank.(boiler tank to be cleaned)\015\0122)water hardness is more. ... Roper 24 in. RUD4000M Built-in Dishwasher

Have a Bosch shy56a05uc dishwasher that suddenly stopped working to a point. I believe it is related to the door latch switch, because I don't feel the door securely latch shut when I close it, and I also don't get any cycle lights or times registered on the LED readout. If I depress the on switch, the drain pump will start even with the door open, and, depending on how long I leave the switch on, water will start to fill in the dishwasher, open or not.


Does your dishwasher electronic control or mechanical timer? if mechanical timer, I encounter a similar problem n change the mechanical timer. that problem solved.\015\012\015\012Prince P ... Dishwashers

Dishwasher My dishwasher doesnt clean my dishes well lately. I rinse them off b4 putting them in. I dont overload and I dont cover the jets inside. It has always been good but even my silverware is coming out dirty when I clean them off b4 putting them in.Any suggestions on what to try? Its 10yrs old and never had a problem with it.


You may have debris clogging the suction for the wash motor. With a model number, I could tell you how. ... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

Jackson jp-24b purchased this machine used, cant figure out how to work it. I flip the auto cycle on, and then the power switch. The fill light turns green and i assume water is filling up in the machine. In the meantime there are two small red external hoses that hot water comes and i currently just have those hanging in the sink. At the same time, nothing is happening during the wash cycle, the wash gauge doesnt even move only the rinse gauge. Also when i try to drain it nothing happends (begi


It needs a new drain relay box 120 volt the drain is stuck open the jp 24 were not very good machines the red lines are drain lines if you plug up the drian lines at fillup the machine will wash but now it will never drain a new drain box is not c ... Jackson JP-24B Built-in Dishwasher

Hotpoint Dishwasher: HLD404M15SA. I installed the never used dishwasher and the Display Lights don't work. The unit operterates just fine. I tried the reset and powering off a few times, still not even a blink. It didn't come from a dealer, so I don't think the warranty would be an option.


... Dishwashers

I have just moved into a home with the DS-603i and used it for the first time. I put it on the first load and seemed to go for way to long. so i opened it up and t washed the first load ok, but continued to make noises. It would make these noises even when draw opened. Turn on & off at power and it doesn't change the noises. The light on inside indicates rince, which i think is a F1 error code according to the manual online. Any tips on how to fix this?


The F1 error code indicated a leak problem. The noise that you hear is from the pump motor. There is a leak due to the top lid not sealed properly, so the water is shooting out during the wash cycle. It did not seal tightly because there are 2 actuat ... Fisher and Paykel 24 in. DS-603 Built-in Dishwasher

My Maytag dishwasher goes for long stretches when it won't turn on even though I push the proper buttons. The buttons won't light either. It turns on by itself after a couple of weeks of sitting idle. Some of the lights may blink on the start panel while the dishwasher doesn't work, but only on occasion will it fully operate. I have turned off the power and turned it back on, hoping to reset the computer part of the dishwasher. It didn't work.


The Control Touch Panels like to fail on may brands - especially Maytag. They are sensitive to humidity - and a lot have the vents out the front - right by the control panel.Please reply using "continue with this expert ... Maytag Dishwashers

Bosch SHX46A02UC-21 Won't Fill and Drain Runs Continually. Original presentation of problem was that it wouldn't drain. Discovered that Garbage Disposal had plugged drain line. After clearing Drain Line, now drains fine but the drain pump runs continuously and it never fills with water. Have done the Cancel, Power Off routine however, even after that, drain pump runs continually.


Float switch is in the flood position and the drain pump is running..\015\012there is water under the dishwasher or that switch is stuck up.. ... Bosch 24 in. SHU43 Built-in Dishwasher

Hi experts, My Indesit IDL530 dishwasher never seems to run on any of the 5 programmes. On pressing the power button, the red light comes on and on pressing the start/reset button, the light signalling washing comes on and not the one showing water intake. But even then nothing progresses and just a buzz with that wasing indicator on shows for a second and goe off. But today only the buzzer sounds when pressing down the start/reset button and no indicator comes on atll. Will be great if you coul


... Indesit Dishwashers

Bosch SHE55P05UC Used it maybe 10 times in 10 months (long remodel underway) and noticed it didn't work properly. Powers up, but doesn't always fill with water...just "runs" until I shut it off. Or it fills, runs most of cycle, but the soap doesn't open, and I end up with a hard soap "cake" at end of cycle...Or it washes..with soap, but during drying...never turns off...and I'm not sure when the problem occurs, but that everything is wet. At least with this one....I can do


... Bosch Evolution 500 SHE55P05UC Full Console Dishwasher - Stainless Steel

We have a LG direct drive dishwasher (LDF7932ST) that doesn't seem to clean very well. It leaves dried on food bits and a white film on everything especially the cups and mugs. Even on the power scrub cycle with an extra rinse. If the problem is the recirculating pump how do you remove the arm or bottom filter to clean out? I can't seem to locate the instruction book. Thanks for the help Tina


... Dishwashers

It always seems like it never gets enough water to even make the spray arms work. I have even tried to make sure I am not running any hot water in the house. It is about 7 months old and has always acted this way. Could there be something wrong with the installation? My old Sears never had this problem.


Sounds to me as if there is a blockage in the water line supplying the dishwasher or a kink in the water line supplying the unit. Since the water is supplied from the angle stop under the sink there could be blockage at that point. What I would sug ... Dishwashers

My Maytag Quiet Series 300 is not cleaning my dishes very well at all. My glasses always have grit left in them (even with Jet Dry), my coffee mugs have film left in the bottom of them and now even my plates and bowls aren't getting clean. I don't even put my pots or pans in there, so I'm not sure where the grit is even coming from. We have city water and I use a powder to clean with. Also, there has always been a film of dirt that never seems to get rinsed away right where the door opens. Also,


First problem: The film on dishes and glasses. Try another detergent. Manufacturers removed all the phosphates from dishwasher detergents and there are many complaints. I have had good luck with Finish Quantium tabs. Also have purchased Cascade i ... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

Bosch dishwasher Model SHU43C02UC/17 consistently leaves film on glassware, leaves residue in the bottom of glasses in the back position of the top rack, and sometimes leaves gritty residue on dishes throughout the dishwasher. The stainless steel interior is also stained. I regularly clean the filter, use Jet Dry (the product that was included with the machine when I purchased it), and rinse the dishes before filling. The dishwasher has never cleaned dishes like the 17-year-old Kitchen


Although I previously posted with the same problem of a film on the dishes after cleaning, I did find a section in the owner's manual which solved my problem. Lift up the rinse aid cap on the inside door - the factory setting is on "4". The rinse a ... Bosch 24 in. SHU43 Built-in Dishwasher

I have error E:15 with a flashing water tap sign - I've tried the following: a) Clean filter at the bottom - now flushes out with b) remove power - return power c) remove and clean fiter for incoming water at a sort of valve Nothing! when I attach power it continues to flush out (even without water) if I put water in it evacuates without problems. The tap does supply water I've check and with more than sufficent flow and pressure! ...Help .....Thanks Gary


Hello Gary,\015\012\015\012You didn't specify the brand or model number of the dishwasher, but I suspect it's a Bosch, in which case the E:15 error with the flashing tap sign and the drain pump running continuously means the anti-flood pr ... Dishwashers

The dishwasher pump sounds like it is trying to drain, even when the stop button is pressed and the door is opened. The only thing that stops it is turning the power off at the power point. However, when the power is turned on the pump continues. The wash cycle icon flashes, but the usual cycle indicator is not lit at all. The dishwasher will not commence a new cycle.


... Asko D3122XLW / D3122XLB Dishwasher

An electrical panel breaker switch was replaced after the microwave and dishwasher both lost power. The microwave works after replacing the main panel breaker. However the dishwasher will not show any power. Checked the internal circuit board, no burned areas, cannot find an internal GFI reset, what can I do to get power restored to the main control panel or even the unit itself? Rick C


1)check any fuse in the circut board.(blown off)\015\0122)check any loose connection of neutral (or)phase wire to the machine(or)in the switch. ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Hobart lx18 no power to detergent pump, during the wash cycle there is no power present at the connections for the pump, during the rinse cycle the sanitizer terminal will pulse power and the rinse aid and sanitizer pumps will run, is the relay board bad? With the top drawer open and running the led for detergent never lights up during the wash cycle.


You have to go into program and activate the detergent pump.sounds like somebody deativated the det. program ... Hobart 24 in. LXIC-5 Built-in Dishwasher

My dishwasher is brand new Model FDB1502RGS0. I used it for the first time today. It seemed to be cleaning for a very long time. It was up to 2 hours and I had to leave so I turned it off. How long should it take. That seems like an awfully long time. I kept waiting for the drying mode to start and it sounded like it kept filling up and emptying. Does this sound right? Please advise asap.


Most DW today take a minimum of 90 minutes. Run the hot water from the\015\012sink until it gets hot, then start the DW, this will shorted the first\015\012wash cycle. It is not uncommon for the DW to run 2hrs or more based\015\012upon the water temp ... Dishwashers

Dishwasher - Bosche - SHV43A03GB - When the main power switch is ON, even with the door open the pump/motor continues to run (ie. Stop-cycle does not operate). However, the wash-program itself does not run, even with the door closed (ie. No water entering the dishwasher, even though water supply is on and feed lines are clear - not kinked). It is like the program is 'stuck' and I cannot seem to get it to reset.


Your door switch is likely faulty and should be replaced. You can get them at partselect.com ... Dishwashers

During power scrub cycle which is the one we use most of the time the dishwasher stays at one minute fot a long time. the dishes come out clean and it finally does finish cycle just dont know why it takes so long on last minute of cycle for so long


It's just heating the water more ... Bosch 24 in. SHU43 Built-in Dishwasher

Doesnt dry dishes, top rack not clean, has been serviced 3 times


If you have checked everything that was mentioned (and none of them are the issue) then either the heater inside the unit is not coming on during the wash and rinse cycles and/or the fan motor inside the door is not coming on during the dry cycle. A ... LG 24 in. LDF7810 Built-in Dishwasher

BDW45.1 not powering on even after replacing power fuse


... Baumatic 18 in. BDW45.1 Built-in Dishwasher

Used some washing up liquid instead of dishwasher tablets, after i got rid of all the bubbles and drained it, it no longer starts. If i switch the power off and leave it for a few minutes i can select a prgram it starts and a few seconds later there is a beep and the solid green run light on the program selectoe is flashing over the left hand program button. At this stage pushing any program button does nothing, i have to swith the power off and wait 5 miniutes and the the above patten is repeat


Dear sir vif you have used liquid soap in your dishwasher it will make mountains of bubles to kill all bubles outin a hurry take a sos pad put it in your machine and run the dishwaser this will remove all of the soao instantly try it it really works ... Ariston Technologies Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0737 seconds