Having problems with your Hoover 24 in. HD73M Free-standing Dishwasher ?

Can i connect my Hoover HD73M Dishwasher to a cold feed?


Answers :

First off, you need a hot water feed line for your dishwasher, not cold water

Secondly, if you have a garbage disposal installed on your sink you can connect the dishwasher drain hose to the side port on the garbage disposal. That's what that little port is for anyway. If you do have a garbage disposal and hook the dishwasher hose to it then make sure you take a hammer and screw driver and knock out the little plastic plug that's inside the garbage disposal port before hooking up the hose to it, if you don't you'll flood your kitchen.

If you don't have a garbage disposal on your sink, then you're going to have to replace a piece of your sink's drain piping with a wye (Y) tailpiece. The tailpiece has a small branch that comes off it to where you can connect the dishwasher drain hose.

Regardless of which way you hook up the drainage and water lines, make sure you test out the work you did by running the dishwasher and keeping an eye on it. I can't tell you the number of times i've seen people hook up stuff like this and not test it and then when they go to use the dishwasher it floods the kitchen..... usually when people are sleeping at night. Test your work.
Repair Help & Product Troubleshooting for Hoover 24 in. HD73M Free-standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Can i connect my Hoover HD73M Dishwasher to a cold feed?


First off, you need a hot water feed line for your dishwasher, not cold waterSecondly, if you have a garbage disposal installed on your sink you can connect the dishwasher drain hose to the side p ... Hoover 24 in. HD73M Free-standing Dishwasher

Bought second hand hoover performance hd 95 m dishwasher do u connect to hot water pipe or cold put on quick wash but dishes still dirty after wash


... Dishwashers

Have been given a beko DE2541FX slimline dishwasher with no manual .does this connect to a hot or cold water feed?


... Beko Dishwashers

What size connector do i need to connect a siemens dishwasher cold water feed to a standard 15mm male fitting?


... Siemens Dishwashers

Hoover HEDS1064 dishwasher - is this dishwasher cold fill


... Dishwashers

Are Candy dishwashers cold or hot fill please , I have been given one and it has a red hose on it , the person who gave it to me has moved and I have no contact for him! I thought dishwashers are predominately cold fill so am wondering if he had to replace the hose and only had a red one so do I connect to hot or cold pipe please


We don't have Candy brand here in the US, but all dishwashers are always connected to the hot water. ... Candy 24 in. CD950 Free-standing Dishwasher

We are trying to connect fisher and paykel soft touch dishwasher and have no instrucitons. there is a hot and cold hose...but we only have a connection for one hose...we connected the hot, but we cant get the dishwasher to go?


Hi,\015\012If there is only one hose connection on the machine, that will be for the cold supply. \015\012\015\012If you connect that, (and turn on the water!) it should work OK.\015\012Cheers, D ... Dishwashers

Can i use my candy aquaviva cd 622 dishwasher if i only have a cold water supply to connect to it - even though it has pipes to connect both hot and cold water supplies?


I strongly advice against it, because the pumps are gonna assume thier is water their and is gonna try to pump the water in, and u will burn them up if their is no water their.. how ever you could get a splitter and run water to both hoses. even thou ... Candy 24 in. CD622 Free-standing Dishwasher

Bosch she3ar76UC/07 In the box where the house current is connected , the load wire (white) has been hot and insulation burned. No visible damage on the back side feeding the dishwasher. Cleaned up the white re connected, have power, dishwasher will not turn on. Any ideas, is there a fuse somewhere? Thanks


... Dishwashers

Replace bottom seal hoover dishwasher - Hoover 24 in. HD73M Free-standing Dishwasher


Hi,\015\012 \015\012\015\012There's only 2 screws under the top where it screws to work top and 2 on the inside where there are 2 White plugs on either side. If the bottom door seal is leaking you don't have to pull it out just remo ... Hoover 24 in. HD73M Free-standing Dishwasher

Can I run my dishwasher just on a cold water feed even though it as hot and cold feeds


Yes but you will use a lot more electricity. ... Dishwashers

Have a 9 month old Smeg Dishwasher D612SDX. Disconnected water feed and re-connected. Problem is that dishwasher panel now flashes 4 & 5 when turned on, as if dishwasher is running. It isn't running! but can't reset by turning on/off, pressing program key or start key. Any ideas?


Looks like it is either a fault with pump/ inlet valve or with the control panel, let me check the code. Is the appliance running or not? ... Smeg Dishwashers

Zanussi DW908 dishwasher will not fill with water, when filled manually completes cycle untill fill time again. when filled continues on until water needed again. Only cold supply to machine. Water coming to valve, removed valve and freed it up as it was stuck, water flows through the valve when disconected from the dishwasher at filler pipe which leads up the side of washing chamber. When all connected up water will not enter the dishwasher. I,m beaten as I cannot access this area without maj


\012\012Hi,\012Here\012is a tip that will help you to find out why water will not come into\012the dishwasher... Dishwasher Trouble ... Zanussi Dishwashers

I have purchased a Bosch dishwasher SMS50E22au. The manual instructions say cold water connection only yet there is also instructions for a hot water connection . We have solar hot water, and we are unclear as to whether we can connect to solar hot water.


... Bosch SMS69L 24 in. Built-in Dishwasher

Must a dishwasher be connected to hot water outlet or can it be connected to cold water only?


Can be connected to either.If you have a combination boiler connect it to the hot gas is 7X cheaper than electricity to heat the water so save yourself some money. It will also do a cycle in about 30 minutes instead of over an hour! ... Whirlpool 24 in. ADP5962 Free-standing Dishwasher

We have been given an indesit IDL40 Dishwasher It was given with a hot (red) pipe, but I suspect it may have been the only one they had I only have a hot feed available as the washing machine is plugged into the other Can it be connected to a hot feed or do I need to get my plumbing gear out?


... Dishwashers

I have a kenmore ultra wash quietguard deluxe & notice it has been connected to the hot water supply. As I am making some changes I would prefer to connect the cold water supply will this make any difference to the operation of the dishwasher. The unit is less than 2 years old. Thank you


Depends... some units heat the water for you in which case it would not matter and would infact save you money over time. If your unit does not heat the water your going to want to leave it alone for better cleaning performance. Check your owners man ... Kenmore Dishwashers

I have bought my mothers AEG Dishwasher (Oko_Favorit 40300) and need to install it. Do I only need to connect cold water to it? Does it heat up the cold on its own? Thank you!


... AEG 24 in. Favorit 40310 Free-standing Dishwasher

Do you need a hot and cold water feed for the KENWOOD KID60S10 Dishwasher or just cold?


No,\012Just hot...\012\012Heatman101 ... Dishwashers

Idesit dif04 dishwasher is it cold water feed


... Indesit Dishwashers

Hoover dishwasher HEDS 668-80 outlet hose connection


... Dishwashers

Hoover HD73M dishwasher keeps tripping the circuit breaker


Have condensation in the electrical connector .It is grounding .Call an electrician to repair ground and short circuit. ... Hoover 24 in. HD73M Free-standing Dishwasher

Hot & Cold Water connection - can I connect just to cold?


Yes it may take a little longer to process a cycle but yes all new machines are cold feed only now. ... Beko 24 in. D3731F Free-standing Dishwasher

Just bought a hotpoint dishwasher. Make FDL57OG. IS IT A COLD OR HOT WATER CONNECTION


Definitely hot water. If this is a fixya, please post as such! ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

I have been given an almost new hotpoint aquarius dishwasher FDM 550 (possibly P) and am looking for a manual to check that this is cold feed


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2075 seconds