Having problems with your Hoover HED661280 Dishwasher ?

Dishwasher tripped RCBO in consumer unit (loss of power to kitchen sockets)

\015 Switching on appliance caused the above to happen also resulting in flooding from the bottom of the door. After resetting the circuit breaker (RCBO) and switching the appliance off and on, all four program lights are illuminated plus a beeping noise.\015

Answers :

Repair Help & Product Troubleshooting for Hoover HED661280 Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dishwasher tripped RCBO in consumer unit (loss of power to kitchen sockets)


... Hoover HED661280 Dishwasher

Dishwasher does not seem to have power. I have a Kitchen Aid, under counter unit, 9 years old, model KUDS01I. I used it 2 nights ago with no problem. When I push a button, nothing happens, no lights show, etc. It is plugged into the lower half of a duplex socket with disposal plugged into the top. Disposal works, so the problem seems to be with the dishwasher. That also eliminates any issues related to breakers or ground fault indicators, etc. Is there a reset button on the dishwasher? Is there


... KitchenAid Dishwashers

Smeg e2 error (water level tripped). Filter is clean and no rubbish below filter on inside of dishwasher. I have taken the front panel off but am not sure where the float device is located - I am wondering if it is just to the left of what looks like a solenoid. There is no water in the base of the unit in the front panel so would rule out any leaks. Reset program and turned off power at socket but still not using hot water. Possible PCB issue ? Any advice appreciated. Smeg DI612C Dishwasher.


... Dishwashers

When on/off button de-selected large flash from top of door. Main consumer unit tripped and fuse in plug found ruptured. Fuse replaced cb reset but dishwasher has no power. Fuse rechecked found to be good.


Dishwasher stripped down and found MAIN WIRING HARNESS chaffed agains door during opening and closing. New loom in region of £100 so repared old loom. ... Dishwashers

No Power I have a bosch shx33 dishwasher. I just replaced the water valve because of a leak and now I can't start the dishwasher. It's like there is no power to the unit. I know there is power because I get a shock if I touch the two wires that are connected to the water valve. Is there another trip switch or something somewhere?


First let me say that using parts of your body to test for mains electriciy is a VERY VERY bad idea. You are lucky you are not dead. Please do not touch live parts again, get a multimeter or a mains tester.\015\012\015\012If there is mains across the ... Bosch 24 in. SHX33A02 / SHX33A06 Free-standing Dishwasher

I have a kitchen aid dishwasher model kuds01dlsp3. The unit has no power. A repairman found that the power to the unit was fine and then said we needed a new circuit board. The charge would be approx 270. When I look at prices the whole assembly unit cost 179. wouldn't replacing the electronic component be much cheaper?


Hi\015\012\015\012\015\012\015\012\015\012\015\012Thanks for using FixYa. First\015\012thing is to verify that power is available at the power board of the\015\012dishwasher. Open the power board cover and check if the breaker is tr ... Whirlpool Dishwashers

AEG Favorit 45250Vi dishwasher. Following a power failure, the unit won't restart, although power is at the unit. No lights sgow. Is there a fuse or resettable trip in the unit? If so, there is it. (If not, why not!)


... AEG 21 in. Favorit 45250Vi Built-In Dishwasher

Hi. I had f1 appear on my Gisher and Paykel dishwasher. Unplugged from wall. Few days later dried using a hairdryer. Took cover off pcb board and dried in there as well. There was water on bottom of cabinet so understand the F1. Problem is now, I put cover back on pcb board and tried to power up but it is dead? Any sensor.microswitch on PCB cover, or anything i may have missed? No power at all to unit? Any assistance greatly appreciated. PS - Wall socket finer as powers other appliances.


Wait.................. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I have a kitchen-aid dishwasher model kuds01flss0. all of a sudden i can't get it to turn on. did the usual...breaker, power cord, ect. there is power going into the unit. dont know where to go from here


Hello, I sometimes have luck by turning the breaker off for a solid 5 minutes. Not 4 and half but 5 minutes. This sometimes resets the control board like rebooting a computer. If that doesn't do it I'd start by checking for 120 volts at the power con ... Dishwashers

Fisher & Pykal Dual Drawer Dishwasher. Suspect after young child played with control buttoms on top drawer the power won't come on. Bottom Drawer works perfectly. Have tried turning unit off at power socket but this has not fixed the problem. Is there a sequence of buttons I have to press to re-set or is there in fact a re-set button?


Press and hold the key or lock button for 5 sec or till you here a beep to unlock. Or till the light goes out above the lock button. You can get your manual here just find your dishwasher.\015\012\015\012 ... Fisher Dishwashers

Kemore dishwasher 665.17029403 is hooked up, breaker not tripped but no power at all - lights will not come on. Power initially would be intermitent - lights on, then off, but now there is none. Is the unit worth repairing or a new machine a better option cost wise?


I would check the power conction under the dishwasher. Make sure the power cord is disconected or the breaker that supplys power to the unit is off. remove the kick plate at the bottom of the machine and locate the power concetion box and inspect th ... Dishwashers

Own a Frigidaire Dishwasher Model Number FDB4315LFSO and now after about 2 years suddenly the display will not light and function anything. Without pulling the power panel off the whole line circuit seems to have power as they have my disposal unit tied into same electric line and that runs and so does everything else and no breaker is tripped. Is their a reset somewhere to check or any ideas what can casue the display panel not to function any commands at all. Nick


... Dishwashers

Ran dishwasher, we to work, came home, no power, water in bottom. Breaker is not tripped, power to rest of kitchen


Although breaker has not tripped it is still worth changing the fuse in the dishwasher plug.Nothing to lose for a few pennies. ... Whirlpool GU2400XTP Built-in Dishwasher

My dishwasher tripps out when it is plugged in, how can it be resolved? ----- when i plug the dishwasher into the socket, it cuts the power supply to some electrical points around the house. It trips out a switch in the electrical terminal box, what can i do about this?


There is a shorted component in the dishwasher that must be found and repaired. Requires hands on troubleshooting.Eric ... Dishwashers

Opened door and unit did not have electrical power (lights did not come on either unit). Called serviceman. He stated there was no electricity to unit(s). Called electrican. He stated wiring to the dishwasher had power. Called serviceman again. He came out and dishwasher worked. He did nothing to it. I opened the door and the lights(buttons) came on. Unit worked for a few days and this morning, there was again, no power to the unit. What is likely wrong with this dishwasher?


... Fisher DD603B / DD603W / DD603H Dishwasher

Dishwasher I have had above integrated dishwasher which is intermittently tripping the mains fuse. Power is getting to dishwasher and the washing cycles work until a certain point (not the same time) where a loud bang can be heard and the main fuse is tripped. Reset the main fuse and power still gets to the dishwasher and it works again. It has just started to trip the fuse when its not running any cycle (just when power is getting to it). I've checked the fuse on the spur and it looks ok. I hav


Its quite common for the interferance filter to fail on these models its situated in the base of the dishwasher connected to the mains block usually when they fail you can see black dust around it, ... Neff 24 in. S5456 Built-in Dishwasher

IDL750 - Fuse trips when turned on. HELP! We had some electricians here to install a new electrical socket for a new fridge. They put the new socket in the same wiring as for my existing dishwasher!! The first time I tried to start the dishwasher cycle with the new fridge plugged in, the circuit box fuse tripped. Now, even with the fridge turned off, the dishwasher makes the fuse trip when turned on. Is there a fuse inside the dishwasher that has blown and needs to be replaced? or a ground brea


Hi.The first step is understanding if the problem is the socket or the appliance. Find an extension long enough to reach a different socket. Move the appliance to reach the power cord, and connect the dishwasher to a different power sock ... Indesit 24 in. IDL700 Built-In Dishwasher

Hi my dishwasher generation 2000 will not work every time i connect the power it trips all the downstairs sockets


Take it in for a service it may need a new fuse or something simple but what ever you do dont plug it in again they can start fires very quickly wait until a professional comes and has a look at it ... Whirlpool Dishwashers

I have a kitchen aid dishwasher that is not dispursing the water enough to clean. I have cleaned the entire unit with commercial cleaners and have added vinegar to the washer without dishes. And still it seems to not clean. It fills properly but the washer arms do not spin with any power.


You need to remove the wash arms by turning the nut in the centre of the arm and remove,then unblock the holes that are in the arms and replace them,test if the arms now turn and you can see a differance then also check there is salt in the salt disp ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Kitchenaid dishwasher kuds24sewh2. Have done reset with the sequence of buttons and have even tripped the circuit. Nothing has worked. Thye unit powers on and then shuts off.


Hi\015\012\015\012If the drain pump is clean and the water inlet valve is fine\015\012then the issue is with the control board that is bad and should be replaced. Hope\015\012this helps...please post back for further assistance.\015 ... KitchenAid 24 in. KUDI01FL - Multiple Color Built-in Dishwasher

My Indesit IDL500 dishwasher cycles through (about half way) then trips the RCD in my consumer unit - anyone got any ideas?


had this problem and apparently there's a 'float switch' in the bottom of the machine. This switch is a safety cut off and when activated can not just stop the machine but trip the electrics in the house. the reason for it a ... Indesit 24 in. IDL500 Built-In Dishwasher

My dishwasher won't turn on and makes a high-pichted ringing noise. The problem began when our power went out during a storm. The circuit breaker works as the disposal is connected to the same breaker and still works. The nosie stops when I trip the breaker. The unit is almost 6 years old and is a Profile.


... GE 24 in. Profile PDW8280JSS Built-in Dishwasher

I fill dishwasher and add tablet then go to press on button and nothing happens. Unit plugged in. Breaker not tripped. Tested socket and its good. I did fiddle with it a bit and the light did come on for a few seconds but then back off. What next?


... Whirlpool 24 in. DU927QWD Built-in Dishwasher

Dishwasher starts then after a few minutes trips the consumer unit off


... De Dietrich 18 in. VZ9456 Built-In Dishwasher

The unit keeps tripping the power mains - Smeg Dishwashers


... Smeg Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1966 seconds