Having problems with your Hotpoint 18 in. BCI45 Slim-Line Built-in Dishwasher ?

My BC20 slimline dishwasher won't reset. when you switch on the pump constantly drains and the programmes won't reset. Any ideas? No problems encoutered previously with product.


Answers :

Repair Help & Product Troubleshooting for Hotpoint 18 in. BCI45 Slim-Line Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My BC20 slimline dishwasher won't reset. when you switch on the pump constantly drains and the programmes won't reset. Any ideas? No problems encoutered previously with product.


... Hotpoint 18 in. BCI45 Slim-Line Built-in Dishwasher

Hi, Dishwasher problem: When a programme starts, the machine fills with water then stops and the "check water" light comes on. To empty the machine, I used the reset programme which does empty the machine. Any ideas of about what might be causing and the solution to this? Many thanks, Richard


You will need to check the inlet valve and the water level pressure switch. It can also be a low pressure in the pump that is giving out the signal for the control board to shut off.\012So first of all check the water line throughly to confirm. ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

Hi. I have hoover HFI 3015 dishwasher. Just went to put it on and all the lights are flashing with a constant alarm. Have checked inlet and outlet which seem okay. Have tried switching off at plug and it still wont reset. Any ideas? thanks


... Dishwashers

Dear Sir/Madam,I have owned a Beko DW450 slimline dishwasher for 13 months and used it only twice, i wanted to use it last night but when i switched it on the drain pump activated and would not switch off. I powered down the dishwasher to see if that would reset it but unfortunately when i started it again it did the same thing - drain pump activated but would not stop running, it is impossible at the moment to carry out a wash programme. Does anyone have any idea on this problem. Thanks, Patric


... Bosch SHU5315UC Dishwasher

Hi, i have a hotpoint fdw60 dishwasher, i went to programme it and it did a long bleep and skipped straight to ''eco'' but wont let me either reset or start, nothing happens !!! could you possibly give me any hints or advice on what could be the problem or how to fix it ? many thanks


Try holding down the start button until you get 3/4 bleeps that used to work for me ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Hello my dishwasher seems to only do half a job at a time (and the timings for the programmes have increased dramatically). It will do a programme, but not drain, leave a puddle and leave everything dripping wet (no drying) then if I press reset the machine will drain (so the pump is working) but after resetting the problem remains and the programmes continue to not work properly. Can I solve this myself, or is this a problem with the 'computer'? Please help.......!


... Siemens Dishwashers

Drainage Problems My ASKO D3120 doesn't drain properly leaving water in the bottom. I have had this problem before (2 yrs ago) and called the helpline who told me how to reset the machine by pressing the buttons in a particular order which fixed it immediately. Now when I call them they claim this can't be done and they will have to send a technician. Sounds like a money making exercise to me. Does anyone know how to reset through the programming function? Next time I'll write it down and wont h


Turn off the dishwasher by pressing the on/off switch on the top left of the dishwasher. Wait 5 seconds. Press and hold the program button on the right side of the front of the dishwasher. As you are holding the program button, press the on/off sw ... Asko 24 in. D3120 Dishwasher

My Ge profile Triton Dishwasher wont start when I lock it just keeps beeping and the" normal "light flashes there was something stuck in the turnstile and it stopped and beeped all night when I took it out it was left this way I have turned the power off and on and I still cant reset it any ideas it just wont reset


... GE Dishwashers

We have a Hotpoint DWF31 dishwasher which seems to have a fault in the programmer. On 'Normal (65) and Economy (50)' the minutes to end comes up as '2H' and although I have set it running on both programmes, it doesn't appear to be counting down or performing the normal cycle. On the other programmes it works normally. According to the User instruction book, the programmer is self learning and calculates the minutes to end based on previous use of that programme. Is there any way of resetting th


Hi\015\012\015\012 \015\012\015\012Thanks for using FixYa. Switch off the\015\012dishwasher from the power socket and mains and replace all the cables and\015\012switch it on after five minutes. Yo ... Hotpoint 24 in. DWF32P Free-standing Dishwasher

My kuppersbusch igv659 wont finish the programme it gets to 1 min and wont complete cycle, keeps just throwing hot water around and will keep doing this until you swith off and reset the timer.


... Kuppersbusch Dishwashers

Whirlpool dishwasher model #DU1100XTPSB wont work and the clean button flashes 7 times and pauses, any idea? I shut the power off to it at the breaker to see if it would reset, didnt work


... Whirlpool 24 in. DU1100XTPS Built-in Dishwasher

Bosch SHE58C05UC/50 dishwasher stopped at 96 minutes (will not advance) & I cannot cancel. Diagnostic codes C4 then P0, rinse light steady on, drying light flashing. No water in anti-overflow pan, it's dry, float switch is working. Vacuumed out any/all water, Have replaced water inlet valve. Main circuit board shows no sign of solder joint disruption. Have switched circuit on, then off in attempt to reset (negative results). Any ideas on how to reset and then to fix the problem?


... Bosch Evolution 800 SHE58C05UC Stainless Steel Built-in Dishwasher

Smeg df612 dishwasher problem, lights up as a e2 fault ,i have tried draining the dishwasher but still the same problem . the salt container is full of water is this normal?. and how do i reset the machine . ive tried pressing the programme button 4 times but it just shifts through the different cycles . can you help please/.


... Smeg Dishwashers

Hi, I have an Electrolux ESL4115 dishwasher. There is power to the machine. There are no fault lights showing and the programme selection won't move from the 65 degree programme. When I close the door to start it nothing happens. Any ideas what the problem is please? Many thanks


... Dishwashers

I have a SE24T250 and the timer on the auto programme says 188 mins (it is usually around 120 mins) When the prog runs it doesn't finish and shows 1 minute to go and never gets to the drying or end of cycle part of the programme. Have tried the reset but it still shows 188 mins when complete. Any ideas?


... Siemens Dishwashers

Hi. I have a Siemens SE65E331GB Built in Dishwasher with an aquastop system. The problem is that it seems to be stuck at the end of a cycle. The pump is constantly running when stitched on. I won't top after a reset and it continues to run even if you open the door. The water supply light also comes on indicating that there is no water getting to the machine. I have tried resetting the aquastop as per the advice in other threads. This has helped in that the water supply light now stays


... Siemens Dishwashers

Pump is constantly running - trying to pump out water, although there is no water in the tank. This condition remains the same AT EITHER AND ANY reset positions of buttons ABC or programme buttons. Programme END indicator is NOT lit, LOW SALT indicator lamp is ON, LOW RINSE-AID indicator lamp is ON. No apparent blockages. Supply water water is on and free flow.


Hello, welcome to FixYa.\015\012\015\012Based on your description it sounds like the emergency overfill switch has been actuated.\015\012\015\012Here`s what to do and what to look for. ( unbeknownst to many this is built by B/ ... Neff 24 in. S5543X2 Built-in Dishwasher

Matsui MF160 integrated dishwasher: Had problems for a while now with the buttons on the control panel ie: on button needed to be pressed down hard for it to connect and sometimes the wash cycle programme buttons would just keep flashing between the three of them and then they would settle down, for the past few days the on button light has stayed on and wont go off and now all the lights on the control panel have gone off and the dishwasher wont work at all, we have tried dis-connecting it, che


... Dishwashers

Constant Failure Bought the unit along with other LG products to furnish new home. Problem 1: After first few loads, noticed that the dishes were always wet, the repairman came and said he would try replacing some kind of sensor and that we should run it on the "Sanitary" cycle. Have done this ever since, but should you have to run on sanitary to prevent your dishes from coming out soaking wet? Problem 2: Noticed the inside of the door on the adjacent cabinet was changing colour, found out throu


Problem #1 solution.  Make sure that you are using a rinse aid.  All dishwashers require a rinse aid to assist in drying the dishes.\015\012\015\012Problem #2 and #3 suggestion.  Possible that the door is either warped or not clo ... LG 24 in. LDS 5811 Built-in Dishwasher

Frigidare fdb1500lfco wont start. Heat dry light on and wont go off. Circuit breaker fine. Any ideas? No problems with dishwasher up til now. Pushed all buttons, nothing. No standing water.


Press and hold the heat dry button and it will turn off, so dishwasher is usable again. ... Frigidaire Dishwashers

Bosch HydroSensor Dishwasher (SGS5342GB/17) - cleans dishes but constantly leaves a gritty residue in cups, glasses and now on plates. I have to rewash items and the problem is getting worse. I have cleaned filter, topped up salt and am now stuck as what else the problem could be. The dishwasher was here when we bought the house (2 years ago). Any ideas? Thanks


Hi Julie,\015\012\015\012The sprayer arms may need replacing. ... Bosch Dishwashers

My bosch shu43c02uc wont work at all and i think i need to reset it, how would you reset it and can you think of anything else that will help with the problem?


Hello\015\012 \015\012Welcome to Fixya.Based on your post,"my bosch shu43c02uc wont work at all..."\015\012 ... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

Flashing light The 3rd light to the right keeps flashing. I cannot cancel the programme or move the indicator light to any other setting. When I close the door the machine does not come on, just the light keeps flashing. Any idea what the problem can be? There is no water in the machine and doesnt appear to be any blockage in the outlet pipe.


... Smeg 24 in. DWI612 Built-in Dishwasher

Hobart dishwasher sitting at hot temp (174), constant steaming from unit, bottom rinse wand spinning & humming non stop? We reset prior to problem because it was not rising to temp (sitting at 106-112)


Bad thermostat or contactor ... Hobart 24 in. LXIH-3 Built-in Dishwasher

Hi, my zanussi zdf221 dishwasher wont work, it makes a noise and constantly empties, any ideas please


The outlet pump is triggered by the anti flood micro switch via the polystyreene float on the base of the washer. If any water for whatever reason (leaky pipe)is on the floor the machiene automatically switches to pump out mode and only works once th ... Zanussi 18 in. ZSF4123 Slim-Line Free-standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1100 seconds