Having problems with your Hotpoint 23 in. BFI62 Built-in Dishwasher ?

Grit on top shelf after cycle - Hotpoint 23 in. BFI62 Built-in Dishwasher


Answers :

It sounds like the dirty water is going back into the machine. there is a part screwed into the soil chamber that is called a nut and piston and the gasket gets brittle and worn away with the hot water over time and doesn't seal off therefore the dirty water comes back into the machine. not an expensive part to replace and can do it yourself. hope this helps.
Repair Help & Product Troubleshooting for Hotpoint 23 in. BFI62 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Grit on top shelf after cycle - Hotpoint 23 in. BFI62 Built-in Dishwasher


It sounds like the dirty water is going back into the machine. there is a part screwed into the soil chamber that is called a nut and piston and the gasket gets brittle and worn away with the hot water over time and doesn't seal off therefore the dir ... Hotpoint 23 in. BFI62 Built-in Dishwasher

Hi - I have tried all the usual tricks of running an empty load with vinegar, and the food particle filter seems to be the kind that isn't removable. Whenever I run a load, there is enough left over particles on the dishes - especially the top shelf, that I either have to wash all the glasses by hand, or run at least one more cycle. I have a standard size hotpoint built-in dishwasher. Please let me know if there is a way to clean the filter, or an alternative method so that the dishes are a


The best but not the fastest way is to remove the pump and motor assy and visuall inspect for fooreign items in the pump assy and also inspect for damage to the pump inpeller at the same time. Sorry not a fast fix but the best way ... Dishwashers

I have a hotpoint built in automatic dishwasher model HDA3740G02SA. When my dishwasher runs all the cups on the top shelf seem to have dishwashing soap powder left in the bottom of the cups. I do not over fill the cup where you put the dish washer powder in. It seems like it isn't rinsing the glasses and cups on the top rack of the dishwasher properly. Do you know what the problem would be and how to correct it?


Make sure the arm on top isnt hitting something, each time you load it each in there and spin it to be sure it moves freely, also make sure your rinse agent container is full of rinse agent. ... Hotpoint 24 in. HDA3740G Built-in Dishwasher

I own a GE Profile Built-in Dishwasher Model number is PDW7880G00SS, Serial number is FF7872828.  We have recently been having major cleaning issues with it, especially the top shelf i.e. the glasses.  There is always dried up debris on them.  We always run the water hot and run it on "added heat" cycle.  I was wondering if there is a filter, or an area in the dishwasher that needs to be cleaned out?  Even if I put perfectly clean dishes in there, they will come out dirty, which leads me to thin


... GE 24 in. Profile PDW7880G Built-in Dishwasher

Cookworks WP5F Table TOP dishwasher manual - Hotpoint 23 in. BFI62 Built-in Dishwasher


... Hotpoint 23 in. BFI62 Built-in Dishwasher

Our Asko dishwasher no longer cleans the top shelf of dishes properly. Fine white and black grit is left on the dishes after every wash, and if there is any food residue on the dishes it does not come off. In addition, food residue that was not on the dishes to start with is being thrown up onto the top shelf and doesn't clean off the dishes. The control unit was replaced 2 months ago at vast expense, and this problem only arose following the repair. The only suggestion from Asko to fix the new


The problem is most likely that there is still water residue at the bottom of your machine. If the machine is not fully drained it picks up some of the residue and sprays that onto the dishes during the final rinse, leaving an unhealthy and un ... Asko 24 in. D3350 Dishwasher

I have a maytag jetclean quiet pack dishwasher. The top dishes are not getting clean. The glasses always have sandy residue in them and sometimes orange juice etc at the bottom of the glass isn't removed. I have added jet dry, this doesnt work. I ran the rinse cycle today and opened it up during the cycle and I didn't see the middle pop up spin thing in the middle of the bottom shelf doing anything. It should be spraying during the rinse cycle correct? Thanks for your help


Possible that the pump is not working well to spray and inject with good pressure so that the dishes are spot clean.\012You will need to simulate the washer without any dish and checck the performance to understand the fault areas.\012The ... Maytag Dishwashers

How to use a basic dishwasher - Hotpoint 23 in. BFI62 Built-in Dishwasher


Go to hotpoint website and download the user manual ... Hotpoint 23 in. BFI62 Built-in Dishwasher

Our 8 year old integrated 2 draw dishwasher (top draw) has a problem on the rinse cycle and constantly beeps and water at the bottom of the draw remains. I have cleaned out all the grit and stuff residual water and tried to use again. But alas there appears to be a blockage still on the rinse cycle. Can you help or do I need to get a plumber? Thanks...Louise


Sorry i lost you my breaker tripped ... Dishwashers

Tablet wont dissolve in dishwasher - Hotpoint 23 in. BFI62 Built-in Dishwasher


Your water probably isn't hot enough..try running the sink near the dish washer till the water is really hot then turn on your dishwasher ... Hotpoint 23 in. BFI62 Built-in Dishwasher

Dishwasher is 2 years old. Top shelf dishes not getting clean even on on heavy duty and sani rinse cycle. All arms move freely,tried the 2 cups white vinegar in an open container and run cycle. I thought that helped but a few days later we are back to the same thing. No debris around drains. Tried loading differently. I have called for a repair person,but is there anything else I could check on my own?


Sometimes the holes in the arms get blocked up,sweetcorn,rice etc, this then stops the arm spinning and water being sprayed onto plates etc, unscrew it and run water through the centre hole and see what happens. ... KitchenAid Dishwashers

Dishwasher not cleaning top shelf - Whirlpool DU1055XTS Built-in Dishwasher


Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... Whirlpool DU1055XTS Built-in Dishwasher

Water leaking under dishwasher, around motor - Hotpoint 23 in. BFI62 Built-in Dishwasher


Hi friend,\015\012\015\012Tightening the fittings\015\012\015\012Step 1\015\012Remove the service panel that runs along the front of the dishwasher just below the door. If it is screwed in place, remove the scr ... Hotpoint 23 in. BFI62 Built-in Dishwasher

Nothing on the top shelf is getting wet - Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher


Hi,It sounds like you are not getting the full pump pressure you need. I put together a cleaning guide, let me know if you try it and it works or not. ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

MY MAYTAG dishWASHER suddenly will not go through both cycles so the dishes do not get clean It is an older one that has the cutting board top. Not built in. Anyone out there. I thought if I take the door off I can look at the cycle switch. the model number is LWC300 and Series 01 Thanks a bunch


Dishwashers normally stop(thermostop)to wait for water to heat thus maybe the element is fault,try getting a good ohm reading from element,like 20 ohms,hope this helps ... Dishwashers

I have a hotpoint HDA2000G00WW built in dishwasher. The dishwasher does not run unless you press the plastic door under the latch area. I have adjusted the latch and that does not resolve the problem. I notice that the top three screws that hold the plastic eschucion are no longer holding as the plastic screw areas have broken on the eschucion. Do I need to replace the eschucion or can it be tightened some other way?


... Hotpoint 24 in. HDA2000Z Built-in Dishwasher

Our whirpool dishwasher seems to be cleaning the dishes here and there, missing some. The top shelf of the dishwasher does not seem to be cleaning at all. Also the soap dispenser does not seem to be quite empty of soap when the cleaning cycle is done. It is running fine. Could it have something to do with the panel where all the buttons are? Could the sequence be off or something? Thank you Awaiting your reply


This sounds more like the sprayer arm isn't rotating freely.Open the dishwasher and pull the bottom tray forward (remove it if you like)Reach in and try to rotate the sprayer arm. It should move freely. If you give it a quick flic ... Whirlpool GU2400XTP Built-in Dishwasher

Smeg dishwasher After a wash cycle there are small bits of residue left on the dishes (mostly top shelf). I've cleaned the machine with a dishwasher cleaner, the filters have been done too, I've checked the rotor arms rotate - that's Ok as well. I have emailed SMEG but have as of yet not response. Any clues please.


Riff...not sure what the bits are...first, they may be food crumbs or the like. Dishwashers have macerators to grind up food particles but they have no really good way to get rid of them in the wash cycle. Scrape plates of any solids before loading ... Smeg DWI614 Built-in Dishwasher

Hotpoint dishwasher model BFI62


Water leaking into base of machine. tip dishwasher back and drain out water. then check all seals intact, i.e. around arms, around salt holder etc ... Hotpoint 23 in. BFI62 Built-in Dishwasher

Our GE Profile (Quiet Power 6) dishwasher is having trouble cleaning our dishes. The top shelf rarely gets cleaned and the bottom is questionable. It used to work fine. We always use Cascade powder detergent on a normal wash cycle. We have hard water. Any advice would be appreciated. I took apart the washer looking for an obstruction but none existed.


The obstruction can be external to the unit. Check the drain at EACH connection working backward from the sink connection all the way to the motor pump outlet hole. Do not forget to dis-assemble the Air-Gap (if installed) and to check the inside of ... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

My 24in built-in hotpoint dishwasher leaves particles and film on dishes on the top rack


The problem is hard water. There is a new product out called the dishwasher filtration system. It filters the water before it enters your dishwasher. It works amazing and has a money back guarantee. You will love the ... Hotpoint Dishwashers

My kitchenaid dishwasher has a sandy grit left on some items after cycle from the top and bottom areas


... KitchenAid Dishwashers

WATER NOT DRAINING AFTER CYCLE - Hotpoint 24 in. HDA3700G Built-in Dishwasher


... Hotpoint 24 in. HDA3700G Built-in Dishwasher

Made buzzing nosie then stoped - Hotpoint 23 in. BFI62 Built-in Dishwasher


Hello, The problem here is something most likely a piece of glass stuck in the pump which is seizing up the motor. You should pull i out from under the counter and take the pump apart to clear the blockage. If you have any o ... Hotpoint 23 in. BFI62 Built-in Dishwasher

Dishes on top shelf are not comming clean - Whirlpool DU1055XTSQ Built-in Dishwasher


Check these things out.Debris caught in spray arm holes. Remove spray arm and clean out with water and compressed air.Heating element burned out. Check water temp during wash--should read between 130 to 140 F. ... Whirlpool DU1055XTSQ Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2458 seconds