Having problems with your Hotpoint 24 in. BF72 Built-in Dishwasher ?

Light is on but will not run - Hotpoint 24 in. BF72 Built-in Dishwasher


Answers :

Repair Help & Product Troubleshooting for Hotpoint 24 in. BF72 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Light is on but will not run - Hotpoint 24 in. BF72 Built-in Dishwasher


... Hotpoint 24 in. BF72 Built-in Dishwasher

Hi. I have a Siemens SE65E331GB Built in Dishwasher with an aquastop system. The problem is that it seems to be stuck at the end of a cycle. The pump is constantly running when stitched on. I won't top after a reset and it continues to run even if you open the door. The water supply light also comes on indicating that there is no water getting to the machine. I have tried resetting the aquastop as per the advice in other threads. This has helped in that the water supply light now stays


... Siemens Dishwashers

I have a hotpoint built in automatic dishwasher model HDA3740G02SA. When my dishwasher runs all the cups on the top shelf seem to have dishwashing soap powder left in the bottom of the cups. I do not over fill the cup where you put the dish washer powder in. It seems like it isn't rinsing the glasses and cups on the top rack of the dishwasher properly. Do you know what the problem would be and how to correct it?


Make sure the arm on top isnt hitting something, each time you load it each in there and spin it to be sure it moves freely, also make sure your rinse agent container is full of rinse agent. ... Hotpoint 24 in. HDA3740G Built-in Dishwasher

My AEG Oko Favorit 50750 VI built-in dishwasher has been unpredictable for a few weeks - sometimes leaving things dirty although I've run cleaning programmes and replaced the filter basket thingy - but today I have a power light on but no other lights - no programme lights and no 'end' light either. Not sure if it finished the last cycle or not. Desperate not to replace as cash is tight - is there anything obvious I might check please? Thanks..


Hi\015\012\015\012Most probably the door catch switch or the on off button is bad.\015\012Please check the link bellow..\015\012\015\012 ... AEG 23 in. Favorit 50750Vi Built-in Dishwasher

Hi - I have tried all the usual tricks of running an empty load with vinegar, and the food particle filter seems to be the kind that isn't removable. Whenever I run a load, there is enough left over particles on the dishes - especially the top shelf, that I either have to wash all the glasses by hand, or run at least one more cycle. I have a standard size hotpoint built-in dishwasher. Please let me know if there is a way to clean the filter, or an alternative method so that the dishes are a


The best but not the fastest way is to remove the pump and motor assy and visuall inspect for fooreign items in the pump assy and also inspect for damage to the pump inpeller at the same time. Sorry not a fast fix but the best way ... Dishwashers

FDW60 Hello, I have a Hotpoint FDW60 dishwasher. It seems to have the usual quality issues but the actual problem is different to most I see on here. The machine has only been used about 20 times, but yesterday the following happened, I loaded and selected intencive program, when I pressed start the machine made a shriek/chipping sound, it seemed to run for about 5 seconds then stopped with the power and prewash lights flashing erraticly for about 3 seconds then was totaly dead, no power light o


Tom,\015\012If your dishwasher is still under warranty, best thing will be to contact Hotpoint's service center for repair the problem. ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Cranky dishwasher I have to admit my wife's solution is the only one that works. Our ten-year-old Superba built-in usually starts a normal cycle part-way through, at the wash part, without filling or opening the dispenser door. Therefore the dishes come out with the soil now baked on. Closing the door, selecting normal and start results in a pump-out sound, or at least just the pump running to wash the dishes. The dishwasher ignores any cancel button push,and the light does not come on over t


You want to make sure that the dishwasher is level and secure first of all. Then I would look into the door latch assy. Sounds to me that you are not making all the latch switches when closing normally. When you are slamming it, you are making the s ... KitchenAid KUDS24SE Built-in Dishwasher

Won't start The last time I used the dishwasher (built in), it smelled of burning. I turned it off and now although the lights on the control panel come on, the dishwasher itself won't run.


... Zanussi 23 in. ZDI6041 Built-in Dishwasher

Hotpoint LFT 114 dishwasher Cycle seems to run OK BUT water cold. No flashing of lights to indicate error, lights appear to behave as normal. Metered the heater element, not open circuit or short circuit. Metered the NTS resistance goes down as temp goes up Dismantled and checked all connections, all seem good. Ran the self test program and it seemed to get stuck in the wash stage, never seemed to move on BUT no error message. Now what, any suggesting please guys??


... Dishwashers

Dishwasher runs but is not getting any water - Hotpoint 24 in. HDA3400G Built-in Dishwasher


Hi,Here is a tip that will help you to find out why water will not come into thedishwasher... Dishwasher Trouble No Water entering Dishwasher ... Hotpoint 24 in. HDA3400G Built-in Dishwasher

My power was out in my home briefly while my hotpoint bfv620 dishwasher was running. Once the power returned the washer's indicator lights 2 & 4 were flashing. I've tried reseting the machine, turning it off and back on and the lights remain flashing. Any thoughts?


Turn it off and give it more time than before then put it back if the flashing continues then remove the water out of the hose and check that the hose isnt blocked, check the pump if blocked , then it continues that means may be the suppply surge m ... Hotpoint Dishwashers

My 1yo slimline hotpoint dishwasher LST216 has developed a fault when trying to run the 'normal wash': washing stops after a couple of mins, the lights start flashing and the alarm comes on as soon as the water is being drawn into the machine. When I open the door I can hear a whirling/grating motor noise coming from the bottom of the machine. I have cleaned all filters and have run other programmes to check overall functionality and they all work as expected most of the time. I cannot unders


... Hotpoint Dishwashers

I have a hotpoint HDA2000G00WW built in dishwasher. The dishwasher does not run unless you press the plastic door under the latch area. I have adjusted the latch and that does not resolve the problem. I notice that the top three screws that hold the plastic eschucion are no longer holding as the plastic screw areas have broken on the eschucion. Do I need to replace the eschucion or can it be tightened some other way?


... Hotpoint 24 in. HDA2000Z Built-in Dishwasher

S5443X built in dishwasher. Pump runs continuosly even with door open. No indicator lights illuminated


... Neff Dishwashers

Won't run; clean light flashes seven times. - Whirlpool 24 in. GU2548XTP Built-in Dishwasher


... Whirlpool 24 in. GU2548XTP Built-in Dishwasher

Lights up but won't run. - GE 24 in. Profile PDW7880G Built-in Dishwasher


Board could of failed which controls the operatoion ... GE 24 in. Profile PDW7880G Built-in Dishwasher

Clean light blinking, will not run at all - Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher


If the clean light flashes 7 times, pauses, then repeats...\015\012\015\012When\015\012the dishwasher doesn't sense a water temperature increase, it will\015\012stop working and lock the functions (clean light flashes 7 times, all\015\012 ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Some lights kdon't go on. Is not running. - GE 24 in. GLD5500L Built-in Dishwasher


... GE 24 in. GLD5500L Built-in Dishwasher

Two program lights flashing,machine stops - Hotpoint 23 in. BFI62 Built-in Dishwasher


Check that the door is closed all the way and that the door switch is not faulty. Also check drain, drain screen, and pump to make sure they are not clogged, leaky, or loose. ... Hotpoint 23 in. BFI62 Built-in Dishwasher

My Hotpoint BFV620 built in..comes on and runs for about 45 secs with first rinse and then stops before the wash cycle..lights 2 and 4 srart to flash and nothing happens.


... Hotpoint 23 in. BFV62 Built-in Dishwasher

My frigidaire built in dishwasher runs for 4 minutes and then stops. I get flashing lights


... Frigidaire Dishwashers

My hotpoint dishwasher slimline sw60 has a flashing deleciate light after the cycle, we have worked out that it is not heating the water now but running fine and drying the dirty dishes! Can it be fixed easily at a deccent price or is it better to get a new one?


... Dishwashers

Hotpoint built in dishwasher model no BF72 switches on for a couple of minutes then bleeps and showes error E8, can you tell me what the problem is. Many thanks Phil


This seems to be the "anti flood" device at the base of the washer is triggered due to water at the base of the washer. This safety device consists of a polystireene float and a micro switch that detects water leaks/spills and automatically puts the ... Hotpoint 24 in. BF72 Built-in Dishwasher

Dish washer will run but no water comes out. - Hotpoint 24 in. HDA3740G Stainless Steel Built-in Dishwasher


Sounds like your float switch is stuck in the up position. If not you need to check your water inlet valve to see if it is clogged. If you don't hear it click when you turn on the dishwasher it's either stuck in the up position or needs replaced. ... Hotpoint 24 in. HDA3740G Stainless Steel Built-in Dishwasher

Will not drain, pump runs, how to unstop it - Hotpoint 24 in. HDA3400G Built-in Dishwasher


Hi, A clog in the drain line or air gap (if there is one) is the usual reason that a dishwasher won't drain. Often the problem is at the point where the drain line attaches to the garbage disposer or household drain line. If you remove th ... Hotpoint 24 in. HDA3400G Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2267 seconds