Having problems with your Hotpoint 24 in. DWF32P Free-standing Dishwasher ?

Flashing lights on Hotpoint FDW20P Dishwasher

\015 I came home to find the bottom rotor of the machine had come unscrewed inside the machine it had however completed a wash' I then found that when I turned it on for another wash the prewash light came on, I could hear the water flow for a short time but not through the roters. the drain pump then started and both the prewash and rinse lights started to flash. If I set the machine to Normal wash the wash licht comes on and then the same sonario as above resulting in the water draining and the prewash and rinse lights flashing.\015

Answers :

No solution! tried resetting to factory defaults but ended up that even the drain pump stopped working. after flooding the kitchen (nearly). I decided it was terminal and am loking for a new dishwasher urgently as I type. Cheers.
Repair Help & Product Troubleshooting for Hotpoint 24 in. DWF32P Free-standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Flashing lights on Hotpoint FDW20P Dishwasher


No solution! tried resetting to factory defaults but ended up that even the drain pump stopped working. after flooding the kitchen (nearly). I decided it was terminal and am loking for a new dishwasher urgently as I type. Cheers. ... Hotpoint 24 in. DWF32P Free-standing Dishwasher

Hotpoint BC145 Dishwasher not cleaning starts to kick in but then just sticks on the "R" light flashing and cannot reset even after turning off. Itbeeps when pressing the select button sound weaker and shorter than they used to and the light does not move from the "R". On a couple of times I have tried it has reset and then the dishwasher starts but after about 3 minutes there is a low beep(not the usual beep when a programme finishes) and the washer stops and the light is flashing on the "R" ag


... Hotpoint 18 in. BCI45 Slim-Line Built-in Dishwasher

Hotpoint dishwasher BFV620 lights 2 and 4 flashing and will not complete a cycle. Dishwasher has been working ok but suddenly stopped and lights 2 and 4 flashing. Checked obvious blocked filter and kinked pipe etc,


... HP Dishwashers

Hotpoint lft114 dishwasher on off light plus second light a eco light flashing


... Dishwashers

Flashing lights I have a hotpoint dwf40p ser no ls12-ev03 it pumps fills then the wash light and the drying lights flash and dishwasher stops with no further progress


... Hotpoint 24 in. DWF32P Free-standing Dishwasher

My power was out in my home briefly while my hotpoint bfv620 dishwasher was running. Once the power returned the washer's indicator lights 2 & 4 were flashing. I've tried reseting the machine, turning it off and back on and the lights remain flashing. Any thoughts?


Turn it off and give it more time than before then put it back if the flashing continues then remove the water out of the hose and check that the hose isnt blocked, check the pump if blocked , then it continues that means may be the suppply surge m ... Hotpoint Dishwashers

Hotpoint BFI680 My dishwasher (hotpoint BFI680) works on occasions but more often than not goes on then it beeps and the 4th LED light ("eco auto") light is flashing. Water is getting through to the machine fine and ive tried resetting the machine - any suggestions?


... Hotpoint 23 in. BFI68 Built-in Dishwasher

I have a Hotpoint Dishwasher model no BFV620,hope anyone can help,the problem is 1(listed as pre wash) and 2(listed as wash) flashes rapidly when system starts to drain ,and the system does not drain completly ,still dirty water in bottom of the dishwasher,checked instruction manual and this lists any other forms of lights flashing but not the 2 mentioned,any advice would be greatly appreciated


... Hotpoint 23 in. BFV62 Built-in Dishwasher

HOTPOINT LFT114 DISHWASHER, FAULT ON/OFF LIGHT FLASHES +THE 50C ECO LIGHT FLASHES & NO HEAT. IS IT JUST THE ELERMENT . mANY THANKS FOR YOUR TIME.


... Hotpoint 24 in. HDA3740G Stainless Steel Built-in Dishwasher

Dishwasher Problem Hotpoint Dishwasher SDL510G, only get flashin light, filter cleaned, it has drained, no water in bottom. Won't turn off, will keep coming back on and flashing the same light. Unsure of the issue. Many thanks for any help. James


Send it to the agents, bud. It\\'s probably an anode or faulty resister on the PC board. ... Dishwashers

Hotpoint aquarius dishwasher eco light not flashing wont start


... Hotpoint 24 in. FDW60 Free-standing Dishwasher

FDW60 dishwasher Hi My dishwasher is about 15 months old and the problem I have is that it seems to stay on pump and the Ecco45 light is flashing.  A repair company looked at the machine and said that the motor looked like it was leaking and water was getting in the bottom setting off the micro-switch.  He contacted Hotpoint who fitted a new motor today at a cost of £89.85.  Went to use dishwasher tonight and we still have the same problem.  The dishwasher started the washing programme for about


I've just (as of 10 minutes ago) had the same problem. I followed the advice given elsewhere in this forum and removed the bottom cover - water running out so needed a big towel to mop it up. I stood the machine upright and restarted it - no problem! ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Flashing lights on Hotpoint FDL570 Dishwasher


I had an identical problem with the salt and rinse aid lights on the left and the drying and end lights on the right flashing shortly after switching the dishwasher on. When I pulled it out, as this was the only way to look at the pipework, I noticed ... Dishwashers

Hotpoint Dishwasher Model BF1620. Daily and Eco lights flash rapidly


... Frigidaire 24 in. FDBB945DC Stainless Steel Built-in Dishwasher

Hotpoint Dishwasher BFI620 lights 2 and 4 flashing


... Hotpoint 23 in. BFI62 Built-in Dishwasher

Dishwasher Hotpoint LFT114 - The dishwasher does not finish it's cycle. Two of the settings lights flash when dishwasher has stopped.


... Hotpoint Dishwashers

Flashing lights on hotpoint aquarius dishwasher fdl570g


... Dishwashers

Hotpoint sdw60 dishwasher the delicate light keeps flashing


Very sorry ,Control board  is bad ,listen even if you replace that you are going to have modify the whole d/w to make it right.Contact manufacturer and see how far this problem will go. ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Hotpoint FDW60 Dishwasher stops and fast and delicate light flash


... Hotpoint 24 in. FDW60 Free-standing Dishwasher

I have a Hotpoint Aquarius FDW 20 dishwasher. Prewash and Wash lights were flashing, machine had stopped and water was at the bottom of the machine. What does this indicate? After removing some debris from the water drainage pump, then reassembling the machine, I now get the pre-wash LED flashing and a motor operating, but no futher progress into the wash cycle. What does this mean?


Dishwasher always full of water at the end of cycle ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

My BCI450 Hotpoint Dishwasher Normal & Eco lights are flashing which is some sort of error message. How do I fix this? Hotpoint want to charge over £100 to send someone out!


... Hotpoint 18 in. BCI45 Slim-Line Built-in Dishwasher

Hotpoint BF1620 Dishwasher, only one light is flashing, not able to change from that programme. button to change program will not respond so dishwasher will not work.Help. Single Mum with screwdriver! what can I do?


Thanks for your question!I'm sorry that you haven't received an answer yet.The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:1. the question is unclear, incomplete, or poorly ... Hotpoint 23 in. BFI62 Built-in Dishwasher

I have an Hotpoint LS12 -EV03 integrated dishwasher. It will not start/fill. The forst two lights on the left hand side of the light cluster are flashing at the same time. There is a small amount of water also at the bottom of the machine


... Hotpoint 23 in. BFI62 Built-in Dishwasher

FDW60 Hello, I have a Hotpoint FDW60 dishwasher. It seems to have the usual quality issues but the actual problem is different to most I see on here. The machine has only been used about 20 times, but yesterday the following happened, I loaded and selected intencive program, when I pressed start the machine made a shriek/chipping sound, it seemed to run for about 5 seconds then stopped with the power and prewash lights flashing erraticly for about 3 seconds then was totaly dead, no power light o


Tom,\015\012If your dishwasher is still under warranty, best thing will be to contact Hotpoint's service center for repair the problem. ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Hotpoint fdw60 dishwasher. Eco light (3rd light) flashing. tried the to tip on side to empty excess water. However, same thing happens on ecah cycle. Any advise


When the eco light comes on , that means that an incorrect water level had been detected.This may be occasional event, or caused by a fault, like probably in your case.Try first resetting and troubleshooting the machine. ... Hotpoint 24 in. FDW60 Free-standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1403 seconds