Having problems with your Hotpoint 24 in. DWF61 Built-in Dishwasher ?

DWF 61 wont end programme

\015 Ran the dishwasher and it won't end the cycle. It appears to be stuck with 1 minute to go permanantly. Now I can't even run it.\015

Answers :

After a number of visits by an engineer, who just guessed at what it could be, and then ordered a part, changed the part on another visit, I insisted that a 'senior Engineer' visit, and be allowed sufficient time to make sure the problem had been solved. The senior engineer visited a week ago, and finally diagnosed what I had been saying for six months, " The water heater is not getting hot". The senior engineer visited yesterday and changed the 'HEATER UNIT DWF61' part number MS-1801925 (UK). Just before he changed the heater unit he found an electrical connection disconnected, so it may have been the cause of the heater unit not working, although he changed the unit anyway. All working fine now, so will renew my maintenance policy.
Repair Help & Product Troubleshooting for Hotpoint 24 in. DWF61 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

DWF 61 wont end programme


After a number of visits by an engineer, who just guessed at what it could be, and then ordered a part, changed the part on another visit, I insisted that a 'senior Engineer' visit, and be allowed sufficient time to make sure the problem had been sol ... Hotpoint 24 in. DWF61 Built-in Dishwasher

Hello, I have a washing mashine (BOSCH MAXX WFL 2860), just a few years old. Right now it wont start the centrifuge at the end of the programme, it will just deliver a strange, low grinding sound. Is this something that can be fixed? A common problem maybe with a common fix? regards, Thomas


... Bosch Dishwashers

My kuppersbusch igv659 wont finish the programme it gets to 1 min and wont complete cycle, keeps just throwing hot water around and will keep doing this until you swith off and reset the timer.


... Kuppersbusch Dishwashers

We have a Hotpoint DWF31 dishwasher which seems to have a fault in the programmer. On 'Normal (65) and Economy (50)' the minutes to end comes up as '2H' and although I have set it running on both programmes, it doesn't appear to be counting down or performing the normal cycle. On the other programmes it works normally. According to the User instruction book, the programmer is self learning and calculates the minutes to end based on previous use of that programme. Is there any way of resetting th


Hi\015\012\015\012 \015\012\015\012Thanks for using FixYa. Switch off the\015\012dishwasher from the power socket and mains and replace all the cables and\015\012switch it on after five minutes. Yo ... Hotpoint 24 in. DWF32P Free-standing Dishwasher

Smeg dwf 64 sse dishwasher wont work


... Smeg 24 in. DWF612WH Free-standing Dishwasher

Wont programme when turned on to what programme i want its just steames no water and the delay button wont turn off


Oh okay I see the info now- \015\012it's the temp sensor- \015\012I believe you have to replace the entire unit...\015\012go to appliance parts and distributors.com they can help with parts...\015\012do you have a manual? ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Electrolux esl6115 Normally use machine on quick 65deg c programme which lasts 25-35 mins and ok. used it on normal 65 deg c programme which lasts 108-118 minutes. Now programme stuck on the 2hr programme.??? wont let me scroll along programme choice?


... Dishwashers

Tricity Bendix model no DH090,control knob sticks at various points within the programme on all programmes,when you turn the knob to assist with wash programme , dishes etc are cloudy and gritty at end of programme


... Dishwashers

Miele g7859 will rinse and drain on programme but wont run through a wash programme and drain its stops after about 30 secs was working on a wash programme till it went to drain f a fault code would


... Miele G7859 Thermal Disinfection Dishwasher

Miele g7859 will rinse and drain on programme but wont run through a wash programme and drain its stops after about 30 secs was working on a wash programme till it went to drain f a fault code would come up tipped machine on its side then it would rinse and drain it would not do that before


... Miele G7859 Thermal Disinfection Dishwasher

The start light is flashing on and off and the programmer wont change to another programme it stays on the normal programme and the dishwasher will not start


Seems to be relatively common. Ma doing one now with that exact problem. If you hold button in for about 10 seconds, it should reset.(switch off then on again to push start.). If same action continues, the electronic module needs to be re ... Whirlpool 24 in. ADP5966 Free-standing Dishwasher

Zanussi aquapulse de 4744 keeps stopping half way through the programme. The programme selection light, drying light and end of programme light are all flashing. Does anyone know what this means?


... Dishwashers

Hoover HND 625 does not heat the water(cold fill) and at the end of the programme leaves cold water in the machine. Pots not washed properly. If new programme is selected it empties water in first minute or so.


... Hoover Dishwashers

E3 error code on Candy CD1454-80 integral dishwasher. Machine heating up ok, but programme not functioning properly & ends up with constant beeping. Have heard noises over last few days during programme


Hi\015\012\015\012 \015\012\015\012E3 error code in your Candy is a temperature error, which\015\012means that the unit is not reaching its desired temperature level. However, as\015\012the unit will heat water then it means that ... Candy Dishwashers

Pump is constantly running - trying to pump out water, although there is no water in the tank. This condition remains the same AT EITHER AND ANY reset positions of buttons ABC or programme buttons. Programme END indicator is NOT lit, LOW SALT indicator lamp is ON, LOW RINSE-AID indicator lamp is ON. No apparent blockages. Supply water water is on and free flow.


Hello, welcome to FixYa.\015\012\015\012Based on your description it sounds like the emergency overfill switch has been actuated.\015\012\015\012Here`s what to do and what to look for. ( unbeknownst to many this is built by B/ ... Neff 24 in. S5543X2 Built-in Dishwasher

Keeps coming an R and wont pump water into it as it was earlier and now wont select and of the programmes


... Haier ESD400 Stainless Steel 24 in. Built-in Dishwasher

KENWOOD DISHWASHER KDW12ST3A PROGRAMME BUTTON WONT SELECT CYCLE AND DOOR WONT SHUT


... Kenwood KDW243A Builtin Dishwasher

My AEG Oko Favorit 50750 VI built-in dishwasher has been unpredictable for a few weeks - sometimes leaving things dirty although I've run cleaning programmes and replaced the filter basket thingy - but today I have a power light on but no other lights - no programme lights and no 'end' light either. Not sure if it finished the last cycle or not. Desperate not to replace as cash is tight - is there anything obvious I might check please? Thanks..


Hi\015\012\015\012Most probably the door catch switch or the on off button is bad.\015\012Please check the link bellow..\015\012\015\012 ... AEG 23 in. Favorit 50750Vi Built-in Dishwasher

Electrolux ESL63010 integrated dishwasher 10 months old- works for a few seconds, then stops and beeps continously. & the End indicator light flashes once. I turn it off, cancel programme, set it again, shut the door -it starts and goes on to complete the programme and washes the dishes perfectly. It has been doing this 'performance' for a week now -every time I use it- can you shed any light please


... Electrolux Dishwashers

Matsui MF160 integrated dishwasher: Had problems for a while now with the buttons on the control panel ie: on button needed to be pressed down hard for it to connect and sometimes the wash cycle programme buttons would just keep flashing between the three of them and then they would settle down, for the past few days the on button light has stayed on and wont go off and now all the lights on the control panel have gone off and the dishwasher wont work at all, we have tried dis-connecting it, che


... Dishwashers

Matsui MF160 dishwasher is running programme but is cold. All lights etc are on as normal, beeps at end of programme. I have replaced the heating element, but it is still cold. Any ideas?


It sounds like there is a short somewhere in the line running to the heating element. You probably did not need the replacement, and hopefully can return the one you got. I would trace the wires from the heating element if it was me personally, unl ... Dishwashers

Programme jumps from one to another and sounds like the motor is just running on and wont start again for a while. It's not completing the programme.


Lets try the following hope this works\015\0121.- unplug the appliance, isolate it from the electric supply.\015\0122.- Remove the kitchen unit plinth and check inside the inspection panels below the door to see if there is water in the b ... Hotpoint 23 in. BFI62 Built-in Dishwasher

Wont drain dishwasher wont drain at end of cycle. I have tried the baking soda and vinegar with not results.


You may have check flapper valves. they may need replacing. ... Dishwashers

Red light at the ''s'' symbol wont go off and the dishwasher wont start its programme the model is IDF125 aa class and is less than two years old but the instruction maual is missing!


... Maytag Dishwasher

Programming lights are lighting up when i turn machine on but wont set on a programme. Also the door wont lock in to place?


... Maytag 24 in. MDB8751A Jetclean II Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0707 seconds