Having problems with your Hotpoint 24 in. FDW60 Free-standing Dishwasher ?

Half load on & Fast light flashing

\015 No water is coming into the machine and the water is fine. The salt refill light also comes on every so often. The start/reset button or the select programme button will not do anything. Can anyone HELP?\015

Answers :

Repair Help & Product Troubleshooting for Hotpoint 24 in. FDW60 Free-standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Half load on & Fast light flashing


... Hotpoint 24 in. FDW60 Free-standing Dishwasher

On my whirlpool ADP962 dishwasher the start light is flashing but nothing is working. I can change the programme type (ie rinse, wash etc) but the programme will not start. I can't select either half load or a time delay. By holding the start button it will start the pump but when this stops it goes back to a flashing start light. The programme progress lights are not lit. What is this telling me and how can I reset it?


... Whirlpool Dishwashers

I have a dishwasher hoover HND615 SI fast flashing lights. Starts but then light on cycle is flashing really fast?


... Dishwashers

Flashing lights my fdw60 as not been used for a while now i want to use it, rinse aid light, eco light and fast was light all flash


Switch off the machine and unplug it. Leave for 10 minutes. Plug back in, switch on machine. It has probably gone to sleep and needs re-booting. The control panels on this model are sensitive and from time to time have a mind of their own. Just ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

I have a zanussi tempoline dishwasher, I have loaded this as I usually do, turn the knob to the right and select the 2nd programme the light next to this comes on, I have pressed this to start the machine although it seems as if it is going to start this light flashes and the top arrow on the right of this flashes intermitanly, but the machine does not start the wash programme. The 3hr delay button if I had pressed this by mistake which I am sure I have not would light up. When I found it did no


Hi Ruth.The machine can be in error mode. In this case one or more lights in the control pad will stay on or flash and the cycle will not start.One of the most common fault in your situation, and at start of the cycle is no wa ... Zanussi Dishwashers

Hi there. I'm having problems with my dishwasher. Usuaully once loaded, i push the start button, the closest green light to the start button flashes and dishwasher fills/cycle begins. Now, when i push the start button, the furthest green light from the start button flashes, you can hear the motor running but no cycle begins. No water fills the dishwasher.


... Hotpoint 23 in. BFV62 Built-in Dishwasher

FDB1050REC2 I have loaded my dishwasher and hit start and the washing light is just flashing. The door is closed properly and there is some water in the bottom of the dishwasher. It wont run the washing light just flashes... I have flipped the curcuit breaker but that didnt do any good.


Follow up to my Jun 02, 2008 post. We had a service tech come out\015\012today, and it turned out that the door switch was bad. The\015\012neutral side had continuity with the door shut, but the hot side was\015\012sporadic. A new switch has been ... Frigidaire 24 in. FDB1050RE Built-in Dishwasher

My Kenmore model 665.16022401 has the problem w/ the clean light flashing. I tried the bottom combo of hi temp wash, heated dry, high temp wash, heated dry and it re-set my dishwasher but then after I tried to run a new load it doesn't seem like it finishes all the way through because there is still soap left in the soap dispenser and the dishes arn't all clean, plus the green clean light begins flashing again. Don't know what to do.


... Kenmore 24 in. 16022 Built-in Dishwasher

Kenmore Elite Dishwasher model 665.16262402 has the clean light indicator flashing and it won't let me start a new load. Normally the light is on steady when a load is clean. Once the door is open


... Dishwashers

Fast flashing dishwasher starts ok, then stops after a few minutes with the ''fast'' light flashing. It does not matter what cycle its on, the same result occurs.


The outlet pump could be triggered because the "anti flood device" polystireen float and micro switch at the base of the washer has detected a water leak from a leaky hose or water spil) This device automatically puts the pump out motor on and stops ... Dishwashers

FDW60 dishwasher - taken apart pump and that is clear. Seems that dishwasher fills, and empties and heats all OK but water wont go around the machine ie the motor pump doesnt start - any idea how to take this out and replace without having engineer around? Taken small pump apart and its clear. First of all the Eco and fast light flashed, then we took it apart with some direction from online discussion advice. Now Eco and Pre wash lights are flashing. Machine empties water, then fills with


... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Error code Hi My FDW60 IS FILLING AND THEN FLASHING TWO LIGHTS THE FAST 40' AND THE DELICATE 50' AND THEN EMPTIES BUT THE LIGHTS CONTINUE TO FLASH AND THE MACHINE REMAINS IDLE. IS THIS A FAULT CODE? MANY THANKS


Hi, did you ever manage to fit a new eliment and how hard was it??! Thanks in advance... Sure it has dies since too! ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Zanussi dishwasher red light flashes fast and continuously then end light flashes twive


... Zanussi Dishwashers

My smeg dishwasher seems to be permanently in wash mode. The light on the menu of settings no longer flashes, but permanently is on, and when I run a load it never stops. I hear the two beeps as if the dishwasher is starting a load so it seems to be cycling through over and over. How can I fix this and get the blinking light back? Thanks


You have a timer relay issue ,probable need a new board for it ,a cheap fix would be to time it and see how long it take to run full cycle and put a regulaer outlet timer on it or a alarm off your stove or what ever,save a couple of bucks ... Smeg STX2 Dishwashers

Just purchased bosch ascenta dishwaster. When the wash cycle is finished the clean and half load lights stay on. Is this normal? When do you know that the drying cycle is complete?


... Bosch Dishwashers

FDW60 Fast and Delicate Lights Flash


This is a bad control board that if replaced will only repeat in a short time .My advice is to contact the manufacturer and complain,you have the right as a consumer to do so. ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Dishwasher lights flash half way through program


You will have to consult your owners manual ... Dishwashers

Eco and Fast lights flashing


I had a hotpoint engineer try to fix this type of problem.He insisted that there was something stuck in the bottom of the pump.Sure enough there was. 1. Unplug your dishwaser at the wall.2. Remove the grill under the bot ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Zanussi aquapulse de 4744 keeps stopping half way through the programme. The programme selection light, drying light and end of programme light are all flashing. Does anyone know what this means?


... Dishwashers

Hello, We need some assistance with our Kenmore dishwasher. Last night after I started a load, the dishwasher just stopped and then the washing and drying lights started flashing red, sanitized and green are flashing green and the 6 hour delay button is flashing red. I have pushed the start/cancel button but to no avail. My husband shut the power from it to see if it would reboot, it does not help either. It runs a little bit then quits and does not clean the dishes. Could you give us sugg


Hold the start button for 3-4 seconds and see what that does ... Dishwashers

Favorit 44070 3 flashes on end of cycle light. No water loading. Does not start


You need a water valve if the overfill float is not malfunctioning ... Bosch Dishwashers

AQUARIUS FDW60. THA FAST AND DELICATE LIGHTS KEEP FLASHING.


I had the same problem with my Hotpoint FDW60 and read all the online reviews about how baddly made the FDW60 is and after taking it apart I totally agree.\015\012\015\012As the warning lights were indicating a faulty heating element I ch ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Hotpoint aquarius fdw60. ''fast'' and ''delicate'' lights flashing.


... HP Dishwashers

Panel lights all flashing when trying to start a load


Try pressing delay/resume then drain/off. In some cases you might need to do delay/resume then drain/off twice. ... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

Clean light flashing won't start new load


This may or may not help in your situation, but the following link explains how you may be able to clear the blinking clean light problem: ... Kenmore 15892 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0706 seconds