Having problems with your Hotpoint 24 in. FDW60 Free-standing Dishwasher ?

I have a Hotpoint Aquarius FDW60, when i start the machine it displays flashing lights after about 15 secs these being Fast 40C and Delicate 50C How do I fix this?


Answers :

Hi and welcome to FixYa,

Initially, the flashing light indicates blockage. Though a messy job, it is relatively easy repair although challenging. Areas to check/clean are:
\015\012
    \015\012
  • filter must be cleaned;
  • \015\012
  • water at the bottom must be drained and dried;
  • \015\012
  • the waste pipe that lead into the drain must be removed. There would be grease, debris, food stuff, and others. All the dirt and grime and debris must be removed out of the said waste pipe. It may also be of help to likewise clean the drain where this pipe leads to.

Just a start, do postback how things turned up or should you need additional information. Good luck and Thank you for using FixYa.
Its the control board error and the board needs replacement.will cost u near to $100 for replacement.
Repair Help & Product Troubleshooting for Hotpoint 24 in. FDW60 Free-standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Hotpoint Aquarius FDW60, when i start the machine it displays flashing lights after about 15 secs these being Fast 40C and Delicate 50C How do I fix this?


Hi and welcome to FixYa, Initially, the flashing light indicates blockage. Though a messy job, it is relatively easy repair although challenging. Areas to check/clean are:\015\012\015\012fil ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

FDW60 Following lights keep showing on dishwasher Fast 40C and Delicate 50C and tablet compartment doesnt flip open until door opened so tablets dont wash properly


Hotpoint have said its a heating problem. My mate repairs washing machines so hes gonna have a look at it for me now we have a problem area ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

HOTPOINT FDW60. ERROR LIGHTS (FAST 40C) & (DELICATE 50C) BOTH FLASHING.


... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Hotpoint fdw60 selected programme and started the washer, cycle starts and then stops with the fast 40c and delicate 50c lights flashing


3 problems:\015\012\015\012Thermostat\015\012\015\012Control board\015\012\015\012heater. ... Dishwashers

Hi, i have a hotpoint slimline SDW60 dishwasher that has 2 lights flashing. the fast and delicate lights which means an error but what error and can i fix it myself, can anyone tell me please?


Download the user guide here >> http://kitchen.manualsonline.com/manuals/mfg/hotpoint/hotpoint_dishwasher_product_list.html ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Zanussi Dishwasher ZDT6053. Holding the On/Off button causes the indicator lights to work correctly, but as soon as you remove your finger from the spring loaded button, all the lights go off. Would guess that on/off button should electronically latch via the control board. Have removed mains power for 60 secs in the hope of a 'hard' reset, but no fix. Is there anything obvious to check or fix or must it be a replacement control board?


... Zanussi 23 in. ZDi6053SX Built-in Dishwasher

FDW60 Fast and Delicate Lights Flash


This is a bad control board that if replaced will only repeat in a short time .My advice is to contact the manufacturer and complain,you have the right as a consumer to do so. ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

AQUARIUS FDW60. THA FAST AND DELICATE LIGHTS KEEP FLASHING.


I had the same problem with my Hotpoint FDW60 and read all the online reviews about how baddly made the FDW60 is and after taking it apart I totally agree.\015\012\015\012As the warning lights were indicating a faulty heating element I ch ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Hotpoint aquarius fdw60. ''fast'' and ''delicate'' lights flashing.


... HP Dishwashers

Hotpoint FDW60 Dishwasher stops and fast and delicate light flash


... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Fast and delicate lights flashing.


No, do not repair this, everyone who has purchased this model should demand a refund !!!!The problems are endless. ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

My fdw60 hotpoint dishwasher seems to start then the fast light and the delicate light flash and it stops. Please help.


Have you tried cleaning out the filters in the base of the machine? Also make sure there is no bits in the filter sump. Then give it a clean using a dishwasher cleaner. ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Error code Hi My FDW60 IS FILLING AND THEN FLASHING TWO LIGHTS THE FAST 40' AND THE DELICATE 50' AND THEN EMPTIES BUT THE LIGHTS CONTINUE TO FLASH AND THE MACHINE REMAINS IDLE. IS THIS A FAULT CODE? MANY THANKS


Hi, did you ever manage to fit a new eliment and how hard was it??! Thanks in advance... Sure it has dies since too! ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Error lights. When I start a wash cycle machine fills begins to wash then empties, then two error lights flash which are fast and delicate can you explain why this happens and how I can resolve the problem thanks. Terry-ann


This is a Circuit Board that is bad (main control).Do not repair this because the problem returns,and returns. ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Dishwasher model 665.13763K602 SER FU3009053 the control panel on the front of it has 4 lights on and won't turn off. they are the pots/pans, norm wash, china, and fast wash. the other 2 lights will not turn on - smart wash and quick rinse. I cannot make the dishwasher start. When I press the cancel button, it does something for about 60 sec. then stops.


... Maytag Dishwashers

Fast & delicate lights start to flash FDW65


... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Aquarius FDW60 fast 40, delicate 50 flashing


... Hotpoint 24 in. FDW60 Free-standing Dishwasher

FAST 40 DEGREE, DELICATE 50 DEGREES & SALT REFILL LIGHTS ARE FLASHING, WHAT DOES THIS MEAN?


40 and 50 degree lights are flashing on my free standing fdw60 hotpoint dish washer ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Water does not drain 'Fast 40' and 'Delicate' lights come on to indicate a fault.


Hi\015\012\015\012\015\012\015\012Thanks for using FixYa.\015\012Dishwasher not draining properly or not draining at all issues can arise due\015\012to different reasons. Usually, these issues are related to kinked hoses,\015\012knocked o ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Washer starts then stopps a few minutes in and the delicate and fast and dry lights flash,please help


This sounds like a heating circuit failure, two most likely are failed heater\015\012or pressure switch. Heater is access fro bottom of unit after base tray has been removed base tray will have safety flot switch attached to it,\015\012pr ... Hotpoint Dishwashers

Fwd60a fast and delicate lights flashing and cloudy dishes ? any ideas


The problem is hard water. Go to www.dishwasherfilter.com and get their new product. It filters the water and takes out the hard minerals that cause spots and clog di ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Dishwasher fast and delicate programme lights flash before end of wash


Un plug the dish washer for a few minutes and then plug in and see if the problem is sloved ... Dishwashers

Code symbol: lights on Heavy and Delicate blinking during the cleaning cycle. By the codes it says it is a heater error. How should I check this or fix this? Thank you


... Samsung Dishwashers

Hotpoint fdw60 fast and delicate lights flashing


Heater elements on FDW 60 do not last long at all, I am on my 3rd. You are better of buying a heating element and a decent limescale filter, otherwise it will keep happening. The flow through element builds up limescale, causing the element/thermos ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Dishwasher hello just wondering if u can help me? when the dishwasher starts it runs for about 2minutes then the lights fast wash and delicate wash starts to flash, then it starts to drain. is there anything i can do?


Sounds like Heating Element, common fault on this machine. You probaly have a problem with Limescale in your house? It is the limescale that causes the element to overheat/burn out. regardsScottps, ne ... Hotpoint 24 in. FDW60 Free-standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1159 seconds