Having problems with your Hotpoint 24 in. HDA2000Z Built-in Dishwasher ?

Maytag dishwasher just purchased a used portable dishwasher and it will not fill with water?


Answers :

Did you conact water to that dishwasher
Repair Help & Product Troubleshooting for Hotpoint 24 in. HDA2000Z Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Maytag dishwasher just purchased a used portable dishwasher and it will not fill with water?


Did you conact water to that dishwasher ... Hotpoint 24 in. HDA2000Z Built-in Dishwasher

I need the steps to change the hose assembly on my Whirlpool portable dishwasher. When I got it someone had cut the sink connections off so my son connected it to the water and drain with my washing machine which was in the kitchen. However, I have moved and want to use it as portable. I purchased the new hose assembly for the sink faucet, I just need instructions on how to take the dishwasher apart and connect the new hoses.....HELP PLEASE!


... Whirlpool 24 in. Portable Dishwasher Dishwasher

I recently purchased a danby 18" portable dishwasher. I live in an area with soft water but the warning light still comes on. Do I need to fill the salt container with just water??


If in a soft water area, no need to do anything ... Danby Dishwashers

I have a maytag portable dishwasher that I paid over 500.00 that I would not give 10.00 for another just like it. We have had it a little over a year and I don't use it. It has never thrown all the water out after each cycle and then it over flows. I can't leave it washing and go about my other chores because I can't trust it,so I wash my dishes by hand. I am 58 yrs. old and I am having to go on disability due to an illness and I need my appliances to work.I have a Maytag washer and I like it ju


Call whirlpool at 800-874-4698 have your model and serial handy, tell them what is going on would not mention the 10.00 thing, be nice as you can and ask for some help with this issue and they may help you As dad says it caint hurt to ask\015\0 ... Dishwashers

I just purchased a Brada ep9242aww portable dishwasher. I did one successful load with it, but the second load didn't work. It filled with water, but never finished the cycle, and when I finally noticed, there was dirty water in the bottom tub.


... Dishwashers

Maytag portable dishwasher-won't fill with water. Sounds like it is going through the hoses but doesn't fill inside.


... Dishwashers

Portable Dishwasher Hello, We just got a used Haier portable dishwasher, model HDP18PA and while the hose connnects fine to the sink, the water isn't going into the dishwasher and is coming out of the connection. Does that make sense? It looks like, if it operates properly, the water should be sucked into the dishwasher but the connector isn't pulling the water in. Help! Thank you! Tara


You have to have a good seal. Get a hose washer from your local hardware store and replace both of them on the hose if they are like a garden hose. If you still don't get any water to the unit, post again and I'll step you through it. ... Dishwashers

About a 3 year old maytag stainless steel inside dishwasher, not cleaning, often soap resdue on dishes or silverware, I use fresh new cascade, checked to see if washer fills with hot water, seems to up to the bottom of the door when I open durning cycle, arms go around, no obvious plugging of the screens, no junk in the foot chopper propeller, no paper or plastic or food in the jets of the arms. Motor went out on it 9 month ago and I had it replaced by appliance repair station here in Missoul


Water must be 130 Deg F to wash properly. ... Maytag Dishwashers

I have a Frigidaire dishwasher. Model FDB520RHS0, Serial TH92539147. The drum fills with water but will not drain. I purchased the unit about 2 years ago. It has been used sparingly and mostly on light wash. I removed the basket and could find nothing blocking the drain. Is there a fix? Can I replace the drain pump? The unit is making a noise as if it is trying to drain but nothing is happening. I have checked the drain line for clogs and it is clear and the terminal end is conn


... Frigidaire 24 in. PLD2560LCC Energy Star® Built-in Dishwasher

I bought a used GE Nautilus portable dishwasher GSC3200. I was assured that it worked but it doesn't. The motor hums and it fills with water but thats it. No washing. No draining. Any ideas? Thank you


... GE 25 in. Nautilus GSC3400J Free-standing Dishwasher

The adapter on my maytag portable dishwasher comes off the faucet when I try to run it sending water everywhere! We JUST replaced the adapter and hoses, $50 and not the problem. It seems that the plastic pieces (not metal balls) are wearing out as soon as they're used. Does anybody know what I can do or if that isn't the problem, could it be that I have the wrong end on my faucet????? HELP!!


If you just replaced the connector and it won't stay on, replace the adaptor on the faucet. ... Dishwashers

My dishes are coming out lacking shine and with a cloudy coating on the silverware and glasses. I use CascadeComplete and an additive liquid in the "shine" cup. My Maytag dishwasher is 15 years old. We also have very hard water, so I am being sure to fill the cups full of the powder prior to washing. Any tips? [email protected]


I'm not an expert, but either it's the hard water, or it's not getting the "shine" liquid. I'd look for a soap that specifically says that's for use with hard water. A water softener would be the best solution.Just keep an eye on the "shi ... Maytag Dishwashers

I need to know how to fix my dishwasher. It's a portable Maytag. older. Not sure how old. It will fill up with water and heat it up, but it gets stuck there and will not wash the dishes.


Hi.If the machine fills and heats up the water, but does not proceed any further in cycling , that means that the timer board did not detect that the correct temperature has been reached.The machine keeps heating or filling wa ... Dishwashers

I have an Electrolux ESI 6104x. Regularly just after starting the dishwasher as it starts to fill for the first time the water inlet cuts out. If you turn the water off at the mains disconnect the inlet pipe (spilling a bit of water in the process) reconnect the inlet pipe and turn the water back on the dishwasher fills and runs perfectly. This fault used to happen occasionally and now happens regularly.


Disconnect the fill pipe from the back of the machine and you should see a small mesh strainer in side the dishwashers inlet valve. Check that this is not dirty - to clean it pull out the strainer and rinse under the tap. ... Dishwashers

Miele G858SCVi Plus dishwasher intake drain button is flashing and washer will not fill with water. We had a pluged drain and tried to use a plunger on it and water backed up into dishwasher. ...now it won't fill with water. Help!


Hi,\015\012\015\012the unit will not fill with water until it will drain as it needs to complete the drain function before it can move onto the next step.\015\012\015\012make sure the non return valve under the filter is prope ... Miele 24 in. G656SCi Plus SS Built-in Dishwasher

Maytag portable dishwasher turns on, but water won't go through


... Maytag Dishwashers

No water is coming thru the water valve to fill the dishwasher. The water is turned on. I had a Kenmore portable dishwasher and we just converted it to a built-in. The electricity is on and the water line installed. When I turn on the dishwasher, it comes on ok but no water is coming into the machine.


Most probable cause a faulty intake solenoid. OK start simple and go from there.If your have power and light etc come on then we know you are good for power. I'll assume that is OK. If\012you are not getting any li ... Dishwashers

Maytag dishwasher we have a dishwasher that is a few years old. we have been noticing a film on everything we wash in it. we have used the dishwash dispencer that you use to clean a dishwasher and i use jet dry with no solution. we have taken out the spray arms and cleaned them with no solution. our next step is to raise the temp of the water'


Go buy a product called Lemi-shine and run it thru your dishwasher empty to clean out any hard water and soap deposits. If you can try using only about 2 table spoons of detergent and stay clear of the premeasured tablets. Most of the dishwashers bei ... Dishwashers

My sound conditioned Whirlpool dishwasher is real old. It fills up completely with water. It looks like it will overflow, so I stop it. I thought it always started washing from the start. Do they always fill completely up with water, then start washing. I never noticed. I am afraid the water will overflow. Can it? Last time I ran this, it had a real loud motor. I used to hear the motor running from the start, but now I don't, just water filling up to what looks like overflow if I let it. I baile


... Whirlpool 24 in. GU2500 XTP Built-in Dishwasher

Hi I have a problem with my Bosch SHU43CO6UC/22 dishwasher. using "power scrub plus" and "regular" cycles it will continue to fill and overflow the door, after the cycle has run even when the power button is off. I am using the quick wash cycle at the moment .After the cycle has run i open and check if the water has drained or not,If it has it does not continue to fill and flood.If there is water in the bottom after the cycle has finished it will keep rising untill I push the rinse hold button


The bosch dishwashers use a fill valve that is attatched to the inlet hose. yours is stuck in the open position. this usually happens when you have hard water, as the minerals build up on the sealing surface of the water valve. there is no easy ... Dishwashers

We lost electricity very briefly today which caused the dishwasher, washing, drying, clean buttons to blink when the electricity came back on. I opened the door to do a load of dishes hours after the electricity came back on and the basin was filled with water which caused water to spill out of the dishwasher. The basin was empty last night when we used it. It seemed to fill up when it was not running.


It seems unit fill valve is stuck open and water is coming in even when machine is off.fill valve opens up only when u start the unit.2 chks this u can open the door and look at the hole inside from where water comes in.if water is coming in with do ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

Maytag Dishwasher I would like to know the proper water level after DW fills. Older Whirlpool units a quick guide was when water just covered heater. I have a new D/W and the water supply is difficult to access, there is a kink in the water line slowing the water flow. The D/W fills to bottom of heater, but because the unit is so quiet I can't determine if it is timing out or working properly. I intend to repair water line when counter work is done. Thanks for any help Gary


Newer Maytags should fill close or up to the heater not over. Sounds like your alright for now but I would get that water line fixed. ... Maytag 24 in. MDB8951AWS Stainless Steel Built-in Dishwasher

KitchenAid Dishwasher fill up with water after use


Hi BB,There are only 2 places the DW can get water from. One is the drain line and the other is the supply line. We need to eliminate one to diagnose the problem, OK? The first picture is a drain hose gone wrong... ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

Kenmore Dishwasher model 665.1675592 doesn't seem to wash as well as it used to. Seems to have a low water level. Filler valve works, allows water in, but never seems to fill enough. No spray reaches top shelf, I think due to insufficient water level. It's like the timer doesn't stay on long enough for it to fill. Also cycle time seems WAY up, but if the timer is slow, how does it time out filling so fast? Looks like it would be slow all the time. Suggestions?


... Kenmore Dishwashers

Maytag Quiet Series 300 dishwasher leaves sediment on dishes (primarily glasses) after running the Autoclean cycle. We've taken it apart, cleaned spray arms, filters, float and replaced some seals, but still have problems. We use Cascade detergent and Jet-Dry (what was recommended when we bought the dishwasher). Our water temperature is 120 degrees (maximum setting we can have without having our tankless water heater modified), but this dishwasher problem was an issue with our old tank water hea


The problem is hard water. www.dishwasherfilter.com has a\012product to solve this problem once and for all. It filters the water going into\012your dishwasher and remov ... Maytag 24 in. MDBH950AWS Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2406 seconds