Having problems with your Hotpoint 24 in. HDA3400G Built-in Dishwasher ?

My dishwasher just stopped working - Hotpoint 24 in. HDA3400G Built-in Dishwasher


Answers :

Repair Help & Product Troubleshooting for Hotpoint 24 in. HDA3400G Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My dishwasher just stopped working - Hotpoint 24 in. HDA3400G Built-in Dishwasher


... Hotpoint 24 in. HDA3400G Built-in Dishwasher

Brandt dishwasher my dishwasher has stopped working AGAIN!!! everytime i call a repair man out they say the temperature re-set needs doing and they fiddle about under the machine, its a built in dishwasher so they take the plinth out underneath, have a fiddle and hey presto it works but i am sick of paying 65 quid for the privilege, i hv asked them what to do but they obviously wont tell me, can you help???


The lights on my dishwasher are working but It doesn't do anything when I hit start. ... Dishwashers

I have a ge profile quietpower 7 dishwasher. its built in.cannot find manuel and cannot find the serial number anywhere on the dishwasher..i need either your help with serial number or help with why water will not go into the dishwasher. motor runs water decided it wont go in. one day worked perfect and next day stopped working.


Hi\015\012\015\012This is often caused due to the fill valve. You can ... GE Dishwashers

I just bought a used LG LDS 5811ST stainless steel built in dishwasher. The previous owner said he bought it 4 years ago. It's in great shape but doesn't work. It powers up but the water is not pumping into the dishwasher. The previous owner said that he thought it was the pump. He said he took it apart once and cleaned a bunch of crud out of some hoses and it worked for a while then started making funny noise and stopped. When i got it home i powered it up and connected water hose. It seems to


Rom the Service Manual:"1E INLET ERROR Not reached to the normal water level in spite of 10 min. water supply.The Hall sensor is OK?Check the frequency of Inlet Water by the Test Mode." ... Dishwashers

Hi, I have a 10yr old Neff s5543 built-in dishwasher, it is has been working fine but recently has stopped fully draining. I have removed it from the housing and checked all pipe work is unblocked and not kinked, have also blown back down drain tube to free any blockages from drain pipe, have also removed pump cover and checked around impellor for any foreign bodies etc. Everything seems clean and free. I ran a complete heavy cycle (empty dishwasher) and allowed drain pipe to drain into a


Hello there and thank you for choosing fixyaOk there are acouple of things that can be checked on this along with what you have already checkedDrain solenoid\015\012 \015\012 \015\012 \015\ ... Neff 24 in. S5543X2 Built-in Dishwasher

Hotpoint dishwasher BFI620 not drained and won't now work: Moved into a new house and acquired a built in dishwasher. First load was fine - or so I thought. Washed and rinsed ok, but large amount of water left in the bottom of the machine which means it now won't work. I've taken out the filter and it appears to be clear, also checked the hose for any kinks, but now I'm stuck. Any ideas?


... Dishwashers

Hotpoint dishwasher LFT04 stopped working - help?!


... Dishwashers

WATER IS NOT COMING INTO DISHWASHER - Hotpoint 24 in. HDA3400G Built-in Dishwasher


Pump is clogged or defective, if nothing else workes, like the dry heater, check ur dill timer ... Hotpoint 24 in. HDA3400G Built-in Dishwasher

Hotpoint sdd910 Hotpoint dishwasher stops working error A 8 or A 10 flashes on the display. Any ideas wht this might be


... Dishwashers

I have an inglis ipu5846 built in dishwasher it fills thaen trys to start but wont start or drain now i took off the lower spray armthe part that is screw down under it tryed cancel drain and it worked put thetop bacck on but not the spray arm and it wont work.what stopping that from working there are not any moving parts on that piece


... Whirlpool Dishwashers

Dishwasher just buzzes no pump - Hotpoint 24 in. HDA3400G Built-in Dishwasher


... Hotpoint 24 in. HDA3400G Built-in Dishwasher

KitchenAid 24 in. KUDI02CRBS stainless Steel Built-in Dishwasher: Just stopped working before Christmas. I had washed a load a day before, and the next day I couldn't use the Rinse Cycle. The lights turn on for Normal and Heavy, but nothing happens when I press Start. I played with the breakers a couple times, to try to "reset" the machine, but it didn't do any good. I really don't want to be spending a lot of money on that dishwasher, especially after reading all the horror stories abo


... KitchenAid 24 in. KUDI02CRBS stainless Steel Built-in Dishwasher

Dishwasher runs but is not getting any water - Hotpoint 24 in. HDA3400G Built-in Dishwasher


Hi,Here is a tip that will help you to find out why water will not come into thedishwasher... Dishwasher Trouble No Water entering Dishwasher ... Hotpoint 24 in. HDA3400G Built-in Dishwasher

Do all hotpoint washers have a food trap - Hotpoint 24 in. HDA3400G Built-in Dishwasher


... Hotpoint 24 in. HDA3400G Built-in Dishwasher

I bought the Frigidaire® 24-Inch Built-In Dishwasher( Model: FDB4315LFC) from LOWES 2weeks ago. It seemed work properly just after installation, but it had been stop again and again. if I press the door little bit forward, it run again but stop continuously every 5~10 minutes. It was new and I am sure i installed it correctly. What should I check up?


Check the door is not obstructed by cabinets on sides ... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

My dishwasher does not drain - Hotpoint 24 in. HDA3400G Built-in Dishwasher


Change or check water outlet pump assy.... 01179512835 ... Hotpoint 24 in. HDA3400G Built-in Dishwasher

Hotpoint dishwasher BFV620 lights 2 and 4 flashing and will not complete a cycle. Dishwasher has been working ok but suddenly stopped and lights 2 and 4 flashing. Checked obvious blocked filter and kinked pipe etc,


... HP Dishwashers

Why doesn't the dishwasher drain? - Hotpoint 24 in. HDA3400G Built-in Dishwasher


The problem is likely a blockage in the drain line that runs from the dishwasher to the sink. you should take the panel out from under the door and then disconnect the drain line and check for a blo ... Hotpoint 24 in. HDA3400G Built-in Dishwasher

Bosch dishwasher stopped working - Bosch Evolution 800 SHE58C05UC Stainless Steel Built-in Dishwasher


... Bosch Evolution 800 SHE58C05UC Stainless Steel Built-in Dishwasher

Smeg Dishwasher Hello I have a smeg dishwasher - built in, push button. It has stopped working - the program start and you hear it drain but that's as far as it gets, no water appears to be getting in. A couple of times the last 2 program buttons flash or the rinse light is on when we open it. let me know if you have any thoughts on this - I'd really appreciate it. thanks Diane


Replace the timer/control board ... Dishwashers

I have a De Dietrich DV640JE1 built in 45cm Dishwasher, working fine for over 3 years. After replacing the connection under the sink to fix a leak it has stopped working. But I dont think this is related. I run a cycle and it fills water in the bottom of the machine, it drains it out in the end but the 2 arms are not rotating and no water comes out. I checked the arms and they are not blocked. A faint clunking sound can be heard at some part of the cycle. I did also run a cycle with the dr


Hello Benny,\015\012\015\012It's highly unlikely that replacing the connection under the sink is related to this problem.\015\012\015\012From the symptoms you describe, it's almost certain that the circulation pump motor has f ... Dishwashers

Hotpoint dishwasher dw602bi cycle stopped with intermittant bleeping and all lights flashing. Tried switching off at mains. Will not work now. Help


... Dishwashers

Will not drain, pump runs, how to unstop it - Hotpoint 24 in. HDA3400G Built-in Dishwasher


Hi, A clog in the drain line or air gap (if there is one) is the usual reason that a dishwasher won't drain. Often the problem is at the point where the drain line attaches to the garbage disposer or household drain line. If you remove th ... Hotpoint 24 in. HDA3400G Built-in Dishwasher

Two program lights flashing,machine stops - Hotpoint 23 in. BFI62 Built-in Dishwasher


Check that the door is closed all the way and that the door switch is not faulty. Also check drain, drain screen, and pump to make sure they are not clogged, leaky, or loose. ... Hotpoint 23 in. BFI62 Built-in Dishwasher

Hotpoint, intergrated dishwasher BF12/47916/7 has stopped working, There is nothing happening at all. it has done half a cycle the only thing that happens is when you put the cycle on the dot before cycle no: 2 the power light comes on orange, this usually goes red when the cycle is on. I have changed the fuse & there is no difference. Help!


... Hotpoint 23 in. BF41 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2142 seconds