Having problems with your Hotpoint 24 in. HDA3420Z Built-in Dishwasher ?

We just bought house that is five years old and the previous owner told us that the dihwasher had never been used. It is a Hotpoint Model 3400G02WW, with serial # LG804739Y. It will not come on, and does not appear to be getting any power at all. We have checked cuircut breakers and they are not tripped. Have not looked any further yet. Any suggestions?


Answers :

The dishwasher should be plugged into a GFCI outlet, most likely in the cabinet under the sink. Check to make sure the outlet has not tripped. There should be test and reset buttons on the outlet. Reset it and try again. The GFCI outlet has a finite life span and I have seen the outlet fail. If there is no power after a reset, then try to replace the outlet with a similar one. If the outlet is not under the sink, it may be behind the dishwasher.
Repair Help & Product Troubleshooting for Hotpoint 24 in. HDA3420Z Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

We just bought house that is five years old and the previous owner told us that the dihwasher had never been used. It is a Hotpoint Model 3400G02WW, with serial # LG804739Y. It will not come on, and does not appear to be getting any power at all. We have checked cuircut breakers and they are not tripped. Have not looked any further yet. Any suggestions?


The dishwasher should be plugged into a GFCI outlet, most likely in the cabinet under the sink. Check to make sure the outlet has not tripped. There should be test and reset buttons on the outlet. Reset it and try again. The GFCI outlet has a finite ... Hotpoint 24 in. HDA3420Z Built-in Dishwasher

I'm getting a PF power interupt code. When I press the "Start/Cancel" button the code goes away. Unfortunatly the unit will not power up. It appears to be completely dead. If I cycle the breaker the PF code comes back and we start the process again. What's wrong, help!! Bob


Hi,If pressing the cancel button doesn't get rid of the power failure error\015\012 "PF" then you have a bad control board. So you will need to replace \015\012the control board itself.You could try to disconnect the power su ... Electrolux Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

My dishwasher is leaking from underneath, front left as you look at it. If i go underneath it, there appears to be a seal on the outside (it does not appear to be the one that runs along the bottom of the inside of the dishwasher) that has come away at one point. Do you know a) how to get the front panel off (the bit that makes it look built in),b) how can i get another one of these seals. I assume if i get one we can just fit it into place. Many thanks, Robyn J


Hi,\012Here is a tip that I wrote about dishwashers and them leaking.Leaking Dishwasherheatman101\012\012\012p80897 ... Neff 24 in. S5453X1 Built-in Dishwasher

My Miele G641 displays the Salt PC light even after filling it with salt. I have to cycle the main power switch 3 or 4 times before the Start light will come on. Then when I press the Start button it momentarily pumps out water and then stops. Sometimes the Start light stays on and I can get it to give the pump another brief spurt, but often the Salt/PC light comes on again and the Start light goes out. I then have to re-set the power switch. How do I tell if the logic board is fried?


Hi.This is not a PC, when logic board is fried the machine does not start at all rather than doing weird thing.The logic board is not fried, in the worst case the salt sensor is jammed. Try first pouring a couple of litres of hot wa ... Miele 24 in. Novotronic G641 Plus Built-In Dishwasher

I have an AEG Oko Favorit 8081 dishwasher and it appears that there is no power getting to it [nothing light up] I have checked with a voltmeter and power is getting to the back of the machine. Is there a reset button/cct breaker/fuse somewhere in the washer.


There is no fuse or breaker in appliance.\015\012take outer door panel off and check for breakage in the wiring loom where it enters the bottom of the door. check also the door interlock is operating ok ... Dishwashers

My Kenmore Dishwasher 587.1523 won't start. It is getting power, and the lights come on as normal when the Start button is pressed, but the lights turn off after a few seconds.


... Kenmore Dishwashers

Unit does not power up. checked power to unit ok checked power to latch switch - ok appears circuit board is bad. Traced 120v to board. Any other checks before getting new dishwasher?


Hi mgray770,\015\012It sound like you have done a good job already, but just a couple thoughts before you go buy a new one. If the board does nothing then it could be locked, check your owners manual or whirlpool.com for the exact unlock inst ... Whirlpool Dishwashers

My Hotpoint diswasher suddenly stopped working last night. It seems like it has no power to it, as the motor or pump does not seem to come on at all. Obviously when I get home from work, I will check the obvious first - making sure it has power to it, connections are secure etc. (I had a wire break before) If it does have power, I would assume checking the door switch and timer is next. Any suggestions, and any suggestions for checking the door switch and timer??


Sounds like your on the right track. I would use an ohmeter to check the resistance of the door switch by placing the meter probes on each side of the switch. Test while opened and closed position. Same with timer ... Hotpoint Dishwashers

It appears to finish it's cycle, as far as the dishes are clean - however there is clean water that has pooled on the bottom. you can hear the water fresh coming in - the pump comes on for a few minutes, drains some of the water and shuts off - the pump comes on again - drains some of the water and turns off. I turned the water going into the dishwater off - the pump ran for a few minutes - drained some of the water and then just sits there with the red power light on - there is still the same


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. Dishwasher not draining properly or not draining at all issues\015\012can arise due to different reasons ... Bosch 23 in. SHU3302UC Built-in Dishwasher

I have a Bosch SHU5315 dishwasher that doesn't turn on. I checked power getting to the machine, reset power at circuit breaker box and door lock appears to be working. Is this the power supply or computer brain motherboard?


Be sure lock at door is not loose switch at door if not closed wont come on ck door close switch ... Bosch 24 in. SHU5305UC Built-in Dishwasher

My hotpoint hda3220z07bb has no power at all , turning the timer dial gets no response at all, but I do have power to the motor, water inlet and the interlock works fine, the unit appears dead but there's power there.


CHECK DOOR LATCH OR TIMER BAD ... Hotpoint 24 in. HDA3400G Built-in Dishwasher

No start, no lights. It appears to not get power


It could be the door sensor is not engaging. There is a tab that engages in the door when closed. The tab engages in a switch in the door telling the unit that the door is closed and OK to operate. The switch often moves over ... Dishwashers

Whirlpool dishwasher DU1015XTXBO Stopped working during cycle, acts like don't getting any power. Checked the plugin and it works. No lights or anything coming on the dishwasher. Its like it just


... Whirlpool Dishwashers

Model 1485 asko dishwasher. Wont start Lights wont come on, appears like no power but there is power.


Hi,If there are no lights on the display i.e ' dead ' - it is highly suggestive of faulty control board. You need to replace the control board. Once replaced, it would fix the problem.Unfortunately, there is no reset or fuse ... Asko Dishwashers

Hello, I've been working on a Bosch Dishwasher. It has no display of any kind, and there's a strange grunting sound coming from the wash motor when power is applied (like if you had just plugged it in), as if it's trying to start. The junction box is getting 120V, all connections to the junction box are fine, and the display board and the main control board are all getting the proper voltage. Now, we've already replaced the main control board and the problem persists. The tech line suggested


... Bosch 24 in. SHE43C05UC Stainless Steel Free-Standing Dishwasher

Kenmore dishwasher My dishwasher stopped in the rinse cycle and no longer appears to be getting power, although the breaker works and the plug it is connected to is still receiving power. Is there a reset button for the motor, or some other idea to try and fix this? Thank you for your assistance. Mark


Mark, you probabley blew the thermal fuse located on the main board. Easy fix. Part number 8269213. You can ohm it out to be sure. You have to remove the inner panel to get at the control board. The fuse sits on the top side and clips on. Two wires ... Kenmore 24 in. 16293 Built-in Dishwasher

Our Bosch 22 in SHU43C06UC is not powering up. The lights will not come on, and it appears to have no power.


... Bosch SHU43C05 Stainless Steel Built-in Dishwasher

What does the F2 Error mean? I got that error thsi morning. The engine was buzzing so I turned the power off. I have cleared what appears to be calcium and/or soap build-up in the 3 filters and in the drain. When I turn the power back on I still get the F2 error. How can I restart the machine and turn off the F2 Error?


The F2 error means the tray underneath the unit has filled with water.\015\012You will need to pull out the dishwasher (remove 2 screws at top left/right when door open that prevent tilting).\015\012Unplug and pull out dishwasher.\015\012Remove 4 scr ... Asko D1876 Dishwasher

Hi,rn Hi, We are getting an "F4" error appear on our D3350 whenever we try to use it, (wash, rinse, etc). I can see water coming in from the side inlet, but the error seems to appear once it reaches the inlet for the sprayers. Perhaps the sprayer pipe is blocked? Is there anything that we can do to fix this ourselves? Thanks very much, most appreciated


Yes you need to reset dishwasher to time fill.turn off the power button wait 10 sec,push and hold the programme and start buttons then turn power back on.hold buttons down until display lights up then release them.press programe button until 4 shows ... Asko 24 in. D3350 Dishwasher

Asko D3530 water inlet fault code, water valve is on, water comes in but after water comes in for a couple of minutes we get a (inlet water fault code) check power at circulating pump no 120v unit will not run reset system it will drain and start cycle again with same result


Hello,\015\012\015\012It is common for these valves to "appear" to be ok, meaning they begin to allow water into the unit, but then one of the two coils or plungers inside fail, or are clogged with mineral deposit from the water or other ... Asko 24 in. D3530FI Built-in Dishwasher

Honda gas powered pressure washer--runs great and I get pressure throughout the system but nothing comes out of the wand itself. There seems to be no clog throughout the system . I have cleaned all parts. When the unit isn't started I can get flow throughout the system


... Pressure Washers

My Dishwasher starts, then stops after 30secs and won't continue draining. Everytime I turn it back on it comes up on the steam cycle and won't go to any other cycle, drains for 30secs and stops again. Power light is flashing. Have tried holding power button down for 10secs with no effect. Filter is clean, pipes are straight-no kinks. How do I get it to start working again? It is a whirlpool dishwasher, ADP5550.


... Dishwashers

I can not get the water to drain during a normal wash cyclr. When I press the start/restart button twice it makes noise but no water comes out the end of the drain hose. I have put a shop vac on the end of the hose and can get water out that way but it appears not to be pumping. The washer sits for up to 6 months at a time without being used. Thanks for any help Ted Berry Placencia, Belize Central America


Teddy,\015\012\015\012Buy a new one...then go fishin!\015\012\015\012Richard Vantine (ret'd Colonel...USAF) \015\012Bingelrade, The Netherlands ... GE GSD5310D Dishwasher

Samsung DMR57 We bought a Samsung in June and have been trying to get it to work properly ever since. It is very quite which is great, but like the other person wrote the thing keeps coming on even when the child lock is on. We have had a repair man out twice but it they haven't fixed it yet. The dishwasher is right under the counter we use to prepare food so we often rub up against the controls. The power comes and and it starts the machine on whatever cycle it used last, or rinses the dishes.


... Samsung 24 in. DB5710DT Stainless Steel Built-in Dishwasher

Whirlpool quietpartner II stopped...power coming to into panel but no power on door..how do i test thermal fuse.im getting OL on meter can i bypass the fuse ......


... Kenmore 24 in. 16222 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1308 seconds