Having problems with your Hotpoint Dishwashers ?

Hotpoint Model HDA 3500N 10 BB Unit is only about a year old. The dial does not move. I noticed it when the washer was on for more than 3 hours and saw that the dial was still in the middle of the wash cycle. I then turned it to the rince cycle which operated there (not moving) until I manually moved it to dry. Did not move from there either. Thank you for any help you can give me.


Answers :

Hi


Thanks for using FixYa. From what you have described it seems to be an issue with the timer that has gone bad, they don’t often fail but if everything else is working fine then it is the Timer that has gone bad and needs to be replaced. If the timer appears to be working fine then the issue is with the heating element which is not heating up water and as the water is unable to reach a higher temperature the unit stops at heating cycle i.e. rinse... To resolve this issue you’ll have to repair the heating system problem. Please do accept the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee
Repair Help & Product Troubleshooting for Hotpoint Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hotpoint Model HDA 3500N 10 BB Unit is only about a year old. The dial does not move. I noticed it when the washer was on for more than 3 hours and saw that the dial was still in the middle of the wash cycle. I then turned it to the rince cycle which operated there (not moving) until I manually moved it to dry. Did not move from there either. Thank you for any help you can give me.


HiThanks for using FixYa. From what you have described it seems to be an issue with the timer that has gone bad, they don’t often fail but if everything else is working fine then it is the Timer ... Hotpoint Dishwashers

I have a Kenmore dishwasher (model 363.14478791). I hadn't used the dishwasher in a month. I turned on the dishwasher tonight and noticed nothing was happening, but I was getting a clicking sound. I moved the dial to the right to off. As I moved the dial to the right, there were lots of clicks and clunks. I started over and turned the dial to the start position. Some water went in, but then nothing happened again. I clicked forward one click at a time. Sometimes water came in. Then water star


... Kenmore Dishwashers

I have a Zanussi Dishwasher DW907 age 10 years. The PROGRAMME SELECTOR DIAL became very stiff to operate,to start washing cycle, finally something seemed to snp and Dial now moves freely but not operating the programme of washing. Where can I obtain a replacement Dial and correct the Dial movement? I live in Ombersley, half way btween Worcester & KKidderminster.


DEAR FRIEND,\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012ngfam1 here for you!\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012I am happy to be of assistance!\015\012\015\012\015\012\ ... Zanussi Dishwashers

I have an avanti dw 18 dishwasher . the problem i am having is the when i turn the on button on the motor goes on however no water fills up. The motor is only humming. But; when i press down the float from inside the machine the water fills up and the machine starts to work. after the water drains again the motor continues to run and hum and the dial does not move. when i manually move the dial nothing seems to change . the motor continues to only hum. Even when the dial is in the stop position


... Avanti Dishwashers

Elba dishwasher (turn dial model) under 2 years old, this will be the 3rd time this has occured. You turn dial to preferred setting and press power it pumps out continuely and wont move to next stage, i have tryed reseting but to no avail please help, I will not be buying another F&P product again.


Your unit has had a "brain aneurysm" IE: Your Microprocessor has failed...Either a fix or a new one? ... Dishwashers

I set rotary dial for Normal Wash which it does but does not turn off, rotary dial keeps turning automatically thru t Water Miser, Rinse Hold, Drying, Plate Warmer until reaches Off. Dishwasher operates normally otherwise. Have cleaned the pump and spray arm.


Hello, welcome to FixYa.I will start by saying your po ... Kenmore 17259 Free-standing Dishwasher

We have just moved into this unit fitted with a MIDEA WQP12 - 9011B dishwasher with NO MANUAL. What can we do ? We have been using the dishwasher by turning the operating KNOB to a position and pushing in the POWER KNOB. The machine then goes through a cycle of 80 to 100 minutes but without an USER OPERATING MANUAL, we have no idea of whether the dishwasher is being operated correctly.


... Dishwashers

New apartment. The dishwasher won't work nothing moves inside when u turn it on. The dial in the front slowly turns and the base fills up with water and that is it. Encore model 363.16129100. Was hoping I was missing something simple. I do switch the lock closed before starting . Thank you any help would be appreciated


The movements are caused by the water pump inside sounds like the pump is jammed or bad.see if the propeller looking pieces turn free by hand if so the pump is not working. you could try and see if there something stopping the pump if you feel ... Dishwashers

HELP!!. Have an old smeg dishwasher - SNZ10. We turn it on, and it goes, but the dial never moves on through the cycles - it just stays stuck wherever you have turned it to. Does seem to be heating and water coming in. Husband grumpily doing dishes by hand! HELP!!


After a while thje dial on Dish Washers, wear out and jam, It sounds like it needs a new Timer, However if it's old, I would replace the Dish Washer. ... Smeg CSU2001 Built-in Dishwasher

I need basic operating instructions for a smeg sa 622x dishwasher. Or an operating manual. I can't even turn it on successfully. It's just a dial with no explantion. I'm so frustrated. Sometimes the dishwasher runs for days or doesn't wash a thing. Pls. Help. -Kelly


... Dishwashers

Hoover dishwasher HD95M is sticking between numbers 3 and 4 on the dial, and programme does not move on unless dial is turned to 4. Pump seems to be working


... Hoover HD95M Free-standing Dishwasher

Dishwasher was on and had a power cut for no more than 5 mins. since then dishwasher dial will not move round on its cycle so ends up being on forever if not manually turn dial


... Hoover 24 in. HD98E Built-in Dishwasher

I need to move the dishwasher on to the next part of the cycle manually ie by operating the dial rather than allowing it to run automatically.


Hello, welcome to FixYa.\015\012\015\012Based on you description of the timer not advancing I wonder, does it appear to heat the water ? I doubt it if my suspicion is correct. \015\012\015\012The SHU 30** unit`s w ... Bosch Dishwashers

Telmann dishwasher We have just moved into a new house with a Telmann TEL12DWMS dishwasher. The dishwasher will light up but wont start. Power and Rinse cycle lights light up but when you turn the dial it wont start. Any suggestions? Thank you


... Dishwashers

OPERATING DIAL CONTROL KNOB DIFFICULT TO TURN


... Estate TUD6710 Built-in Dishwasher

My dishwasher dial/knob seems to be stuck,ie not moving to do a wash cycle but it will take in water and if i manually turn dial it will release water.whirlpool mod no. dw621/1 bw series 600


... Whirlpool Dishwashers

I have just moved into a home with the DS-603i and used it for the first time. I put it on the first load and seemed to go for way to long. so i opened it up and t washed the first load ok, but continued to make noises. It would make these noises even when draw opened. Turn on & off at power and it doesn't change the noises. The light on inside indicates rince, which i think is a F1 error code according to the manual online. Any tips on how to fix this?


The F1 error code indicated a leak problem. The noise that you hear is from the pump motor. There is a leak due to the top lid not sealed properly, so the water is shooting out during the wash cycle. It did not seal tightly because there are 2 actuat ... Fisher and Paykel 24 in. DS-603 Built-in Dishwasher

My bosch dishwasher gets stuck in wash mode. We have to turn the dial to move to the next cycle. When we check inside soap suds are built up on the bottom. We use less than a 1/2 of an Electrasol tablet, no wuick dry ball. We just ran the dishes with no soap and there's still soap on the bottom?


... Dishwashers

Hi, My LS2020 ariston dishwasher was in normal wash & stayed there for 2 hours, it washed but the dial would not move any further, then I decided to turn it on to Rapid wash, it filled and leaked all the water outside on to the kitchen floor- what is wrong? I checked and made sure all hoses are ok. Please tell me what is wrong with my dishwasher? Maria


... Ariston Technologies LL64WNA Built-in Dishwasher

Dishwasher is stuck on rines, cant move the dial off it, the start/reseat button is flashing 4 times and repeating, it is not even rinsing, i have turned it off and off at the wall but still the same


... Dishwashers

My dishwasher SMS 448 works up to the point in the cycle when the dispenser is supposed to dislodge the Powerball detergent. It doesn't, and the machine stops. If I open the door and click the dispenser, the Powerball falls into the dishwasher unit itself. But when I close the door, the machine doesn't operate until I turn the knob a bit farther on in the cycle. Then, no water comes out, but the knob moves on in the cycle and the heating pipes heat up


... Bosch Dishwashers

I stupidly put washing up liquid in my very old Bosch SPS 21/24 as i had run out of dishwasher tablets - a few bubbles leaked out but all seemd fine and now it makes all the right noises but nothing actually happens even if i manually turn the dial to move it on to the next stage- any hope??


Take a shop vac and remove all the water and suds.\015\012No shop vac...use a towel or sponge.\015\012Then use a pot to manually fill the dishwasher with cold water. Set it to wash a few seconds then go to pump out setting.\015\012R ... Bosch 24 in. SHE43C05UC Stainless Steel Free-Standing Dishwasher

Dial turns as if it is going through cycle but washer does not operate and it makes a low whirring noise


Pump is either blocked which happens a lot or the pump may have died. ... Indesit 24 in. D61 Free-standing Dishwasher

I turned on the dishwasher tonight and noticed nothing was happening, but I was getting a clicking sound. I moved the dial back to off and started over. Some water went in, but then nothing happened again. I clicked forward one click at a time. Sometimes water came in. THEN WATER STARTED LEAKING OUT. I clicked back to off. After water stopped leaking, I opened the door. There is still water in the bottom. What do I do???


Hi \015\012\015\012Thanks for using FixYa. As the water is not draining and clicking is\015\012coming from the bottom so the issue seems to be with the drain pump solenoid. Usually, these issues are related\015\012to ... Kenmore Dishwashers

Dial sticks in two places until dial is moved slightly


HI. this Timer mechanism will need ot be replaced soon. the timer motor is defective. this will continue to affect the performance of this unit. replace asap. ... Frigidaire 24 in. FDB750RCC Stainless Steel Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0662 seconds