Having problems with your Hotpoint HDA2000G Built-in Dishwasher ?

Will not turn on. turned dial several times to different setting, will not start. checked electric switch, its on; checked circuit breaker, on.


Answers :

Repair Help & Product Troubleshooting for Hotpoint HDA2000G Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Will not turn on. turned dial several times to different setting, will not start. checked electric switch, its on; checked circuit breaker, on.


... Hotpoint HDA2000G Built-in Dishwasher

An electrical panel breaker switch was replaced after the microwave and dishwasher both lost power. The microwave works after replacing the main panel breaker. However the dishwasher will not show any power. Checked the internal circuit board, no burned areas, cannot find an internal GFI reset, what can I do to get power restored to the main control panel or even the unit itself? Rick C


1)check any fuse in the circut board.(blown off)\015\0122)check any loose connection of neutral (or)phase wire to the machine(or)in the switch. ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Asko D3530. Program LED does not come on. Also nothing happens when I push Set, Menu or Start. Tried button on the left (cirle with a I, looks like a reset button?). Checked plug and circuit breaker switch


Hello Rick,\015\012make sure you have tested the unit with the door closed all the way ,make sure the delay option is not turned on make sure the power cord is properly plugged into the outlet, and check your fuse box for any blown circuits sor ... Asko D3531XLHDSS Stainless Steel Built-in Dishwasher

Asko D3530. Program LED does not come on. Also nothing happens when I push Set, Menu or Start. Tried button on the left (cirle with a I, looks like a reset button?). Checked plug, GFI and circuit breaker switch. Still no power and no light no response from various buttons.


Hello,\015\012\015\012Welcome to FixYa.\015\012\015\012It sounds like you've got a bad power switch or a wire at the power switch or as you described it... (circle with a I, looks like a reset button?) ... Asko 24 in. D3530FI Built-in Dishwasher

I was using my Karcher 350M pressure washer working fine but it just stopped having tripped the power boards circuit breaker. The breaker now trips each time I switch on the washer. There is no smell of burnt motor and the electric did not get wet when last in use. Appreciate any suggestions or tests that can be made. I have a decent multimeter. Thanks.


... Karcher 1750 Psi Elec Pressure Washer

Dishwasher will not start when pressing the start button. Timer light flashed numbers and went off. None of the lights and buttons work. Circuit breaker in electrical panel is working. Does the on/off switch need replacing, or is it possible a mini circuit board is bad? Dishwasher installed in 2000 and is used on the average once per week.


As it is nearly 10 years old i would suggest you replacing the circuit board. To test exactly we would need the help of an continuity tester and multimeter. ... Bosch 24 in. SHU53 Built-in Dishwasher

Our KUD1021RBL2 has no power, I have checked the electrical connection and the circuit breaker, I cannot find a thermal fuse and I see no physical evidence of problems on the circuit board.


HiThanks for using FixYa. The issue seems to be its electronic control going bad and should be replaced; you can buy the parts from this ... KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher

My Bosch dishwasher Model SHE44C02UC just went completley dead while washing. My wife and I were in the living room and heard a ''pop'' and went to investigate. We discovered the dishwasher was completely dead with no lights on at all. The on/off switch does not work. I checked the breaker and it is okay. Also the disposal is also on this circuit and it still works so I know the circuit is okay. There is still water in the bottom of the dishwasher - no suds - so it may have been in a rinse cycle


Well done on confirming that the outlet is not the problem. This problem will not be able to fixed by the owner and a service call is the next step. (unless you want to dig into the problem, which could easily be a failed pump motor which took out t ... Bosch Dishwashers

Is there an internal breaker switch that would cause the unit to loose power? I have checked the switch box to make sure the circuit breaked hasn't tripped.


Check where the pigtail ( the wiring harness that goes from the outlet to the actual dishwasher itself. This connection will more than likely be at the very bottom of the dishwasher and is in a metal box. Disconnect the power before opening the bo ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

No power. I have check the circuit breaker it is ok. check the plug and power is going to the dishwasher. I press the on- off switch and there is no power.


Did you look in your owner manual and see if there is an internal fuse? And some units requires that the door lock be engaged before the unit will power up. ... Dishwashers

Unit went dead. There is no power (electric) to it. I checked the circuit breaker and even changed the breaker, but no power. Removed the bottom foot panel and did not see any reset button. I don't know what else to look for.


The electronic control board has failed & needs to be replaced,by someone who knows what there doing.GOOD LUCKECO KIZZA ... Electrolux Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

My Hotpoit FDL570g dishwasher (that is less than 2 years old) is tripping the circuit breaker originally during a wash and now when the unit is switched off and and door is closed. I thought it may be a door lock / microswitch problem and replaced the microswitch. The dishwasher was good for four seperate washes but now the problem has come back when crockery is loaded when the machine is switched off. I'm going to check for bare / rubbed leads but not expecting to find this with a dishwasher of


Hi,\015\012\015\012If your washer is tripping the breaker when it is switched off, this is often a sign that water has leaked - or is leaking - into the bottom of the washer under the washing compartment where there are lots of exposed el ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Amana Dishwasher Model #ADB1500AWB3 (Purchased 7/2009) worked fine on Friday, and last night would not turn on, no green lights at all. We check circuit breaker, and electrical outlet but they were working fine. Do you know what might be wrong?


... Dishwashers

My son opened the washer before it completed the full washing cycle. Now it won't start at all. We checked the switches, gfi, circuit breakers. Is there a reset button somewhere? I pushed and held the Heated Dry Button for 4 seconds. Nothing works.


HI- You didn't give a model # but it is possible that the fuse on the control board burnt out. This shuts the unit down if it gets blown. Yours may not have this fuse, can't tell without a model number but if you are sure it is getting power I'd h ... Kenmore Dishwashers

Dishwasher will not come on. I have checked the circuit breaker and it is on. I switched it on on off just to be sure.


... Bosch Integra® 500 SHX46L Built-in Dishwasher

Dishwasher is reading "overfilling", but no water is in unit. Door can open, noise of motor or pump continues and will not shut off even with the Power switch. Only way to stop noise is to turn off the circuit breaker at the electrical panel. What does this sound like to you?


HI- The flood switch has been tripped. It is located under the unit and is not really accessible except by a Tech. The most likely cause it poor draining; if there is a little water left over from each part of the cycle then eventually the water ... Asko 24 in. D3530FI Built-in Dishwasher

Smeg dishwasher water is leaking out from underneath when washer is turned on . we have checked pipe with water going out and this is not blocked. Also when turned on it is tripping our electric circuit breaker.


The second problem is almost certainly a symptom of the first - leaking water is reaching some of the electrical terminals and shorting them to earth.\015\012\015\012First thing to do is to make sure the strainer in the bottom of the cabi ... Smeg 24 in. DWF1 2 Free-standing Dishwasher

Two days ago my LG dishwasher model lDF 7810BB worked fine. Yesterday I loaded it and the display panel will not light nor show any sign of power. I check the circuit breaker several times and all other electrical items work fine in the kitchen. The 2 year warranty expired 9/08/08


Check for voltage with a multimeter at the wires very near the front, just behind the kick plate. Follow the incoming electrical wire in and remove the little plate the covers the wires/wire nuts. I have seen wires that appear to be connected prope ... LG 24 in. LDF7810 Built-in Dishwasher

I,ve got a prima LPR450 and it won't switch on, i've checked the obvious things like the fuse, circuit breaker and wires in the plug and they ere all fine. when i push the power button there is a faint clicking sound from inside the door.


... Dishwashers

Maytag quiet series 300 problem model MDBH955AWB Set washer to run on Delay last night. All lights were go. Has worked in the past. It didn't run and now, no lights, and doesn't operate. No problem with electric box breaker switch


Same problem...seems this appliance is a piece of ****....i have read nothing but bad things about it....i have the choice to pay 250 to repair it...or replace it....easy choice.... ... Dishwashers

Own a Frigidaire Dishwasher Model Number FDB4315LFSO and now after about 2 years suddenly the display will not light and function anything. Without pulling the power panel off the whole line circuit seems to have power as they have my disposal unit tied into same electric line and that runs and so does everything else and no breaker is tripped. Is their a reset somewhere to check or any ideas what can casue the display panel not to function any commands at all. Nick


... Dishwashers

Hi In the middle of a wash cycle, my dishwasher tripped the circuit breaker on the wall. I diagnosed this by unpluggin dishwasher, plugging in a different appliance and switching circuit breaker back on. new appliance worked OK. When dishwasher had cooled, I tried it again on same circuit (which I knew was working properly). The lights came on for about three seconds, and then the circuit breaker cut back in again, so I knew it was the dishwasher that was causing the problem. Is there anyt


Ck the connections where the cord hooks to the wiring harness. look for hot or shorted wiring . also ck the contro panel for the same . generaly if you have a power draw like you are saying then you can see t ... Dishwashers

Ariston LSI 41 dish washer had intermitant problem of green light not coming on when main power switch turned on and machine not working, the circuit had beed repair before. I played around and got the machine to go through a full circle once then would not go again. So I have put a new circuit board with switch etc. still the switch panel light dose not come on, i found bad connection in connector which comes from small plug on circuit board, (two red wires )I have checked for power to board. W


... Ariston Technologies Dishwashers

I have a Bosch SGI4005 AU/07. When it completes the end of the cycle it trips the houes electrical circuit breaker. It continues to trip the circuit breaker for an additional 5 minutes then all is well. It will do the entire wash. Is this a common problem and has someone got a wiring circuit diagram for this unit.? Any assitance is appreciated.


... Bosch Dishwashers

Have an electrical circuit that has stopped working. Romex circa 1930. The breaker is fine. There are 4 ceiling lights and 3 outlets on the circuit. There is power through the hot wire leaving the breaker. Tried wiring to a different breaker to be sure. Still no power


If there is power leaving the box, you have a broken/damaged wire somewhere.If all the lights and outlets do not work - the problem is with the common (return) (white) or a broken/damaged wire before the first item in the circuit.If the b ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0922 seconds