Having problems with your Indesit 18 in. D41 Slim-Line Free-standing Dishwasher ?
First two lights of four are flashing
\015 Water still in the bottom that has not pumped out.\015
When my ones lights flashed (lights 2 and 4) I thought it was def broken, i then discovered it was a knife in the top tray stopping the shower from spinning. worth a try- make sure its empty when you test it.
Repair Help & Product Troubleshooting for Indesit 18 in. D41 Slim-Line Free-standing Dishwasher
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
First two lights of four are flashing
When my ones lights flashed (lights 2 and 4) I thought it was def broken, i then discovered it was a knife in the top tray stopping the shower from spinning. worth a try- make sure its empty when you test it. ... Indesit 18 in. D41 Slim-Line Free-standing Dishwasher
Just turned the dishwasher on at the wall and tap after it's been sat off for a day. It's done one cycle (eco) and now doesn't seem to be doing anything but flashing. The two lights flashing are the power and eco lights. I have tried turning it off on the console but it turns itself back on and continues flashing. It sounds like it's whirring but I can't hear water. It did have a small leak when we first plumbed it in if that makes any difference?
... Hotpoint 18 in. DC27 Slim-Line Built-in Dishwasher
The power is on the cycle light is on but on the right the first two lights are flashing together. help zanussi aqua pulse de 6744 s
Hi, the first thing the dishwasher does is fill with water, so this sounds like a Anti Flood water pump problem this is just behind the water pipe that feeds the clean water into your machine, one thing to check is if the machine is empty of water a ... Zanussi 24 in. DE6744S Free-standing Dishwasher
Hi i have a Candy CDI 1012/B Intergrated dishwasher and 4 lights are flashing during the first programme then system drains and stops showing four lights lit. We have no instruction manual or service manual this would be good to get hold of as we have serveral of these machines. any idea what the problem is to save us time investigating it. Thanks Paul
Hi. The four leds flashing quickly at start of the cycle means that there is an inlet problem. Check that the inlet hose is not bent, blocked or kinked, ensure that water has sufficient pressure. The inlet valve can be tested reading Ohms at valve te ... Dishwashers
First four lights on cycle indicator flash and machine beeps 10 times and then beeps every 30 seconds
I recomend checking drain hose for kinks or obstructions and checking drain pump. most dishwashers will drain first for about 25/30 seconds.Also check the drain hose into the main plumbing connection it maybe blocked.If it cant drain it wont do anyth ... KitchenAid Dishwashers
My dishwasher keeps beeping at me and the first four lights on the panel are flashing, I have a Baumatic BW07.
I tilted mine backwards with it running and beeping and it stopped beeping shortly...It made a mess on the floor of course but I put it down and lights were still flashing but no more beeping. Thought I would try tipping it forward while it was runn ... Haier HDP18PA Stainless Steel Free-Standing Dishwasher
First two lights are continuously flashing at the same time..
What make is it and how old is it......there are many makes and models with flashing lights they all mean different things.????? ... Dishwashers
Not washing??? please help. i press the start button and it will seem like it is starting the cycle then it stops after about 15 mins and the first two lights start flashing.
... Indesit 24 in. IDL500 Built-In Dishwasher
I have just had a CDA WC430IN Dishwasher installed. I have followed the instruction manual regarding what to do when you first use it. Unfortunately it runs for around a minute then beeps 10 times and has four lights flashing. The trouble shooting guide doesn't show what this means. I have checked that the water is on can you help?.
I would called the people who you bought the dishwasher off of and let them worked on it. There should be at least a 90 days warranty on parts and coverage. ... Dishwashers
Ariston L63 First two lights flashing, water still in the bottom of the dishwasher? What can I do?
... Ariston Technologies Dishwashers
My Ariston L63 has a problem at start of cycle nothing happens except for a buzzing noise, then the first two lights start to flash and it stops, also water not draining from bottom of dishwasher
Looks like the main dishwasher motor is jambed. Need ro gain access to motor then move the vanes at the back untill motor turns freely. Retry. ... Ariston Technologies L63 Free-Standing Dishwasher
The first two lights keep flashing and it hasn't emptied
... Indesit 18 in. D41 Slim-Line Free-standing Dishwasher
Fisher & Paykel model dw60cdx1 display showing E6 and first four lights flashing
Hi!, my Ariston L64 dishwasger refuses to start. It seems to reset OK when the dial is turned fully to the left. After the beeps I select a cycle and nothing happens for some time, then eventually the first two lights begin flashing together.That is as far as it goes. Can you help me fix this problem please? Donna
The three lights for Pots & Pans, Normal Wash, Econo Wash are all flashing. When I hold the start button down for four seconds, just the Normal light is on. However, once I close the door, all three lights are on again, and the dishwasher does not start. We have tried unpugging it and then plugging it in again. It worked once then went back to all three light flashing. Before this, only the Normal Wash and Econo Wash lights were flashing.
Hello,\015\012\015\012Welcome to FixYa.\015\012\015\012I can't seem to access any previous post dialog that may have taken place but I'd like to help if you can fill me in on whats taken place to this point.\015\012\015\012The scenario you describe i ... Viking DFB450 Dishwasher
Whirlpool Quiet II (DU110XTPB1)... Two problems (maybe it's one)... Start/resume light flashing and won't stop. I have tried on the different button combinations from this website and other websites and none of them seem to make a difference. The flashing continues. That's problem number one. Problem number two is that it seems to go into some sort of washing cycle in completely random intervals. When it's in one of the random washing cycles the following lights are on; Normal Soak and scour
Hope it's under warranty, maybe logic board, poor motor design causes main PCB failure ... Dishwashers
When starting my Bauknecht GSFP 5586 dishwasher the program is set for rinsing and the start light flashes two blinks, then again two blink etc. I cannot get the program to change. When I hold the Start button for 2 seconds, the progress light flashes at END for a moment then reverts back to the double blink sequence. I have checked the filter and it is well seated and clean. What can I do to start the program selection again?
Ok, so I had the exact same problem with the exact same model. NOT 7 blinks and to buttons that you do not have.\012I will tell you what I did as I do not know what (if any) of what I did fixed it (it could be luck but I do not think so).\012 ... Dishwashers
My Whirlpool ADP 5406 runs for about a minute and then the light flashes four times, repeatedly. What can I do to fix this? (I can still get the machine to run its cycle by holding down the start button, but the light will flash four times again on completion).
Hi and welcome to FixYa. I am Kelly. \012 Usually this symptom also shows an F7 error code. You will need to remove the lower wash arm (NOTE INSTALLED POSITION) Also you will need to remove the metal grate under the wash arm to ... Dishwashers
Whirlpool dishwasher gu3600 The pots & pan, normal light and delay lights flash all the time. Also the time remaining screen has two horizontal lights on. The dishwasher won't start
... Whirlpool Dishwashers
I have Whirlpool dishwasher about 3years old it is the ADP7966 AAA 6th sense. When I put it on and turn the temperature knob, only the first temperature green light comes on althou I can turn the knob all the way round none of the other lights come on, my rinse aid and salt programmes light up thou ,and when I press the start button it flashes twice stops a bit then flashes twice again, and thats all it keeps doing. I would be very grateful if you help to solve the problem. Many thanks to you.
Smeg DF612S All starts well but after 40 minutes stops with a beep and will not progress to the main wash cycle. Instead all programme lights come on (located on the left), along with the first 2 phase lights (the first two of the lights on the right hand panel). This indicates error code 3 (cannot pump out water), but water is entering and draining perfectly. Please advise.
Check to make sure there r no kinks’ in the drain line or\015\012that it is not clogged it sounds like the sensor is tripping because there is\015\012too much strain on the pump just like a breaker. ... Smeg 24 in. DWI612 Built-in Dishwasher
I have a SMEG dishwasher. Can't find the model number on dishwasher or manual. Had two flashing lights and referred to manual - indicates a blocked filter. Cleaned that out, but now when I try to put it on "light" cycle (indicated by wineglass symbol), that light flashes (but no others as would indicate a problem).. All the other cycles work fine. Any ideas? Thank you!
Hi.If only the crystal light is flashing and no other light is on, then that is not an error code. Problem can be a temporary malfunction, or a defective control module or keypad.The delicate (crystal) light flashing with last ... Smeg 24 in. STX2 Built-in Dishwasher
Whirlpool ADG957 Fault Code: first and third lights on and fourth light flashing along with start button light flashing. I know this is a fault code but don't know what it means.
... Whirlpool Dishwashers
Dishlex dx103 first use light on at settings dial start light flashing finished light also flashes not running ?
... Electrolux Dishwashers
First 2 weeks ago i put an electric control module into the upper section. what comes on is the green flashing light for clean. in checking connections i found the paper for trouble shouting. i did what they said to do. they said hit the time saver - high temp - time saver - high temp. from there all the lights went on & the wash cycle started and ran. then it just stopped & the green light for clean just flashes. the water is still in the bottom & won't drain.
The error indicates that the machine has taken too long to drain the water. Do the following.\015\012 \015\012\015\012Switch off the machine, unplug or disconnect the ma ... Kenmore 16874 Built-in Dishwasher