Having problems with your Indesit 24 in. D61 Free-standing Dishwasher ?

Indesit dishwasher The water does not heat up so the dishes are being washed in cold water and then they are not being dried... Anybody know what the problem is and if it will be expensive to fix.. Thanks


Answers :

Element gone. approx 40 quid for element and 30 to fit it.
Repair Help & Product Troubleshooting for Indesit 24 in. D61 Free-standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Indesit dishwasher The water does not heat up so the dishes are being washed in cold water and then they are not being dried... Anybody know what the problem is and if it will be expensive to fix.. Thanks


Element gone. approx 40 quid for element and 30 to fit it. ... Indesit 24 in. D61 Free-standing Dishwasher

I have a whirlpool quiet partner 2. During a cycle, anyone of them, the water drains while the arms are spinning. Then it just runs dry. Does anyone know what the problem is or how it can be fixed?


The Triac/SCR in the control module is probably U/S and staying on which keeps the drain pump on while the unit tries to perform normally. ... Dishwashers

Bosch SHE58C05UC/50 dishwasher stopped at 96 minutes (will not advance) & I cannot cancel. Diagnostic codes C4 then P0, rinse light steady on, drying light flashing. No water in anti-overflow pan, it's dry, float switch is working. Vacuumed out any/all water, Have replaced water inlet valve. Main circuit board shows no sign of solder joint disruption. Have switched circuit on, then off in attempt to reset (negative results). Any ideas on how to reset and then to fix the problem?


... Bosch Evolution 800 SHE58C05UC Stainless Steel Built-in Dishwasher

Hi My dishwasher DS603 has a fault of F1 code beeping for the whole day. I have no clue that dont know how to do with it. It is not flooding however. I dont know if it has problem due to the water wasnt supplied this afternoon as the pipes are repairing outside. Now we got water supply back and it keeps beeping. i tried to dry it ALL UP but it still beeping. Please give me advice! cheers


... Fisher and Paykel 24 in. DS603H I Built-In Dishwasher

It gets power but no water is going in, the water valve is on as well. what could be the problem and how do i fix it? the last time it did not work, we had a repairman come out and he had to reset the motor, but i want to know if this is something i can fix on my own?


... GE GSD2000J Dishwasher

Hi My dishwasher DS603 has a fault of F1 code beeping for the whole day. I have no clue that dont know how to do with it. It is not flooding however. I dont know if it has problem due to the water wasnt supplied this afternoon as the pipes are repairing outside. Now we got water supply back and it keeps beeping. i tried to dry it ALL UP but it still beeping. Please give me advice! cheers


... Fisher and Paykel 24 in. DS603H I Built-In Dishwasher

I have a karcher 650m, when assemlbed the off on switch wont work, when dismantled the switch seems to work, tried greasing the switch, anybody know how to fix this problem??


... Pressure Washers

Drainage Problems My ASKO D3120 doesn't drain properly leaving water in the bottom. I have had this problem before (2 yrs ago) and called the helpline who told me how to reset the machine by pressing the buttons in a particular order which fixed it immediately. Now when I call them they claim this can't be done and they will have to send a technician. Sounds like a money making exercise to me. Does anyone know how to reset through the programming function? Next time I'll write it down and wont h


Turn off the dishwasher by pressing the on/off switch on the top left of the dishwasher. Wait 5 seconds. Press and hold the program button on the right side of the front of the dishwasher. As you are holding the program button, press the on/off sw ... Asko 24 in. D3120 Dishwasher

Whirlpool Dishwasher ADG 450. Start as normal and it keeps intermittentlly stopping and starting. Washs / drains fine, but sometimes cycle seams to last for a couple of hours. I think it is four beeps when it is stopping and then immediately starts again. We had a problem months ago where as the sink was draining into the dishwasher out pipe, so dishwasher wasn't draining / filling up. Fixed the problem by turning the pipe the other way so water couldn't flow that way - but I don't know if that


... Dishwashers

It went thru the whole cycle and when I opened it up - there was water still left in the bottom - hit the cancel/drain button and nothing happened. Unhooked the drain line to the drain pipe under the sink and no water came out. How do I find out if it is the pump ? If I take it out - what do I need to look for and what trouble shoot things do I need to know. I live about one hour from the nearest town - so I would like to find out the problem - before I call a repairman and maybe fix it myse


... Kenmore 24 in. 17462 / 17464 / 17469 Built-in Dishwasher

The adapter on my maytag portable dishwasher comes off the faucet when I try to run it sending water everywhere! We JUST replaced the adapter and hoses, $50 and not the problem. It seems that the plastic pieces (not metal balls) are wearing out as soon as they're used. Does anybody know what I can do or if that isn't the problem, could it be that I have the wrong end on my faucet????? HELP!!


If you just replaced the connector and it won't stay on, replace the adaptor on the faucet. ... Dishwashers

Water remains in the bottom of the diswasher after the cleaning cycle has completed. We recently had a new kitchen faucet and garbage disposal installed. The dishwasher also hums during the dry cycle, I never noticed this before. Are these problems related? Do I need to get a repairman out here to fix the problem or can I do it myself? Thanks, Robin Pomazal Naperville, IL


... Maytag MDB7609AWS Builtin Dishwasher

Dishwasher sounds like it is running normally, (no grinding sounds or anything)but there doesn't appear to be any water coming into the machine. we checked to see if there was a kink in the line or if perhaps it was a plumbing problem but that does not seem to be the case. I know the circular disk in the front of the machine needs to be down and it is, so can you figure out without seeing for yourself what could be the problem and if so is it worth fixing since I can probably replace it for und


Hi there,\012Well first of all you can check out the following -Water-inlet valve - The water-inlet valve lets water enter the machine. If this valve is defective, you need to completely replace it. It's usua ... Dishwashers

Our GE Profile Dishwasher is not working since today afternoon. The electronics seem to be working fine but the water supply does not start on pressing the start button. The dishwasher seems to go on with its cleaning cycle without water. We don't know how to fix this or to even check any plumbing/water supply problems. Please help.


OK First try this below....\015\012\015\012Ok so your dishwasher won't do anything... it justs sits there and "Hums" you can't make it respond to any controls, and the ONLY way to Stop it. is to unplug the unit, replugging back in it simply "Hu ... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

Leaking This is a problem that I have when the dishwasher is in drying mode. I will find a 5X5 and sometimes smaller, size water spot under the dishwasher after the dishwasher has stopped. I was told it was the vent were the steam comes out and I had that replaced. It still leaks, then they told me to replace the rubber around the door, still leaks now they order a whole new plastic interior door. Please if you have any ideas what could be causing the problem, please let me know. Thank you


\015\012open the bottom panel 2-4 screw\015\012take a flashlight and turn the machine on\015\012see where it come from\015\012if you need take the unit out a bit f ... Jenn-Air JDB4000AWS Stainless Steel Dishwasher

If my dishwasher is not getting water in and it is over 15 yrs old, is it smarter to replace it or should I go to expense of getting it fixed? I am not sure what the cause is, but I do know it is not getting water.


If it is only water inlet screen for the input of water or the input automated valve I would question keeping it. Sometimes it is better to invest in a quick fix. \015\012\015\012This gives you time to buy what you want . Insted of reacti ... Dishwashers

Bottom unit does not always seal and causes water to collect in bottom pan which throw unit into f1 status. Sometimes it stays sealed and is difficult to pull drawer out. Is there a way to reset the unit properly? I know how to pull the drawer and fix the f1 problem but it seem like the seal issue is becoming more frequent. Thanks


These dishwashers are very sensitive to grime collecting around the drawer edges. Try cleaning with a damp cloth by rubbing along the top edges and the sides where the drawer door sits flush with the body.\015\012\015\012Also trun off pow ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I have a dewalt model 67DX39G1l. Used it fine for a couple of years.Went to used it the other day and the water hose leading to it was getting so hot that it melted it.Found ot the pump gets scolding hot only after you release the trigger.As long as the trigger is pulled it works fine.If anybody can help me with this problem,please let me know.


... Dewalt Pressure Washers

Dishlex 403: water will not heat. We have already fixed the dry solder problem and now this


... Dishwashers

GU1500XTLS3 Periodically won't start. Dishwasher has power because pressing cancel causes dishwasher to start draining (even though there is no water). Door switch works because opening door prevents starting drain cycle. No other button on control panel will work except for the 'air dry' / 'lockout' button. Turning off circuit breaker for 15-30 minutes and then turning circuit breaker back on seems to fix the problems but only for a couple uses and then it stops working again. Need ad


This could be the 'fill switch', which is the level sensor. Could be a plastic tube that exerts air pressure into the tube as it fills, make sure it's clear and open. The dishwasher has a sensor that monitors the door being closed too. Some use a hig ... Dishwashers

My lg dishwasher (model # ldf6810st) leaks a small amount of water from the bottom right corner. It appears to happen at the very end of the drying cycle. A technician replaced a gasket but it still leaks. Please tell me how to fix the problem.


... LG LDF6810ST Stainless Steel Built-in Dishwasher

MY SECOND WHIRLPOOL ADG7460 DISHWASHER WAS INSTALLED THIS JULY WHEN MY FIRST(DURING IT'S FIRST YEAR) COULDN'T BE FIXED AFTER 4 ATTEMPTS, THE HEATING ELEMENT KEPT BREAKING DOWN, HENCE NO HOT WATER NOR DRYING. NOW AFTER JUST 2 MONTHS THE SAME PROBLEM HAS OCCURRED WITH THE NEW ONE. ANY IDEAS????


... Whirlpool Dishwashers

Dishwasher My dishwasher is accumulating water on the floor of it and not being drained out. What do I need to do to fix this problem? Also, what is the average time for a brand new dryer to dry clothes? Any suggestions are appreciated.


Dishwasher: I'm assuming you are talking about when the dishwasher is not running. Correct? If the dishwasher accumulates water while sitting idle, it could be a couple of things. The water inlet valve could be leaking by, or you may have an impr ... Kenmore 15129 Built-in Dishwasher

This dishwasher (MAYTAG DWU6402AAE) is 12 years old, and recently started having a problem with the water. I'm not convinced it's spraying or even rinsing. The soap doesn't drain from the container. Dishes are not getting clean. I'd like to know if there's anything I can do to fix this before I call in a repairman. I'm very handy, and can follow instructions. Thanks. Mike


DWU700BAXSoap dispenser does not open during wash cycle. Kace removed ans cleaned pupp and filter also center nozzle which did have some paper specks but is now clean ... Dishwashers

My LG dishwasher upper rack has stopped cleaning. The uppermost arm is seemingly getting no water at all and the arm on the underside of the upper rack is getting some water, but not enough to turn it. I have already disassembled and cleaned all the way down to the diverter assembly and it has not fixed the problem. I think this is a problem with a the (?) diverter pump or perhaps a sensor that sends water to the upper arms. I am trying to figure out how to further diagnose the problems. The


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... LG LDF6810 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1270 seconds