Having problems with your Indesit 24 in. D63 Free-standing Dishwasher ?

Indesit dishwasher door wont close , and keep dclosed, the catch doen1t seem to work anymore , dishwasher working fine , water leaking from below because not closing properly , have had dishwasher for 2 yrs no problems as yet .Wondered if this was a common fault thanks


Answers :

On a D61 I managed to solve this without dismantling the door!
If you look carefully in the hole where the white catch fits you can see the shaft it rocks on. I put a small screwdriver in here and levered it forwards. It didn't want to stay so I put another screwdriver behind the white plastic bit, removed the original screwdriver, and continued to prise the white plastic bit forward until it clicked and stayed. I reckon it is caused by slamming the door. Don
I had the same problem, so I took the door apart as explaned above, found it was gunged up with residue from the washihg cycles. Gave it a good clean, while the part was disconected of course, and hay presto! the door works like new again.
Repair Help & Product Troubleshooting for Indesit 24 in. D63 Free-standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Indesit dishwasher door wont close , and keep dclosed, the catch doen1t seem to work anymore , dishwasher working fine , water leaking from below because not closing properly , have had dishwasher for 2 yrs no problems as yet .Wondered if this was a common fault thanks


On a D61 I managed to solve this without dismantling the door!If you look carefully in the hole where the white catch fits you can see the shaft it rocks on. I put a small screwdriver in here and levered it forwards. It didn't want to stay so I ... Indesit 24 in. D63 Free-standing Dishwasher

Door latch won't close on dishwasher. Hard to close. In addition door squeaks very loud- almost like it is catching on something. the dishwasher moves slighly when trying to close the door -it doesn't appear to be properly installed


... Jenn-Air JDB3610 Built-in Dishwasher

I have a GE Potscrubber 1230 dishwasher and the closing latch seems to close properly but unless I jam a piece of folded cardboard under the latch when it is closed, the unit will not run through cycles properly. Is there a down-loadable diagram that would show how to disassemble this mechanism and show how this works? I wish to attempt to repair. Thanks


... GE Dishwashers

We have had a problem with our dishwasher since "winterizing" it to close the cottage for the winter. We were told to run it for a few minutes with antifreeze in it and then turn off and let it overwinter with the antifreeze in it. Now the machine leaves everything coated with a white film, even though we have a water softener and use jetdry. How can we fix this and is this the proper way to winterize our dishwasher if we close down our cottage and turn off the heat for the winter?


... Miele 24 in. Novotronic G851SC Plus Built-In Dishwasher

Smeg integrated dishwasher door does not close tite. it closes with the catch at the top and stays closed but it not flush with the rest of the doors and is angeled open a few mm or more which causes it to leek from the front bottom corner, how can I get the door to close properly ? thanks


... Smeg 24 in. DWF1 2 Free-standing Dishwasher

We have a MDB4651AWW dishwasher. It is very loud, we have the bottom front panel that seals the dishwasher at the floor but cannot figure out how to install it. One way it does not fit, the other way it won't let the door open and close properly. The noise is terrible and it has been that way for three years. We don't believe there is anything wrong with the dishwasher, figure the bottom panel will deaden the sound. can you show us how it goes?


... Maytag Dishwashers

Hello there, I have a Bosch Logixx dishwasher which I purchased just over 2 years ago. My upper dishwasher tray is not fitting properly into the hose pipe holes on the inside of the back wall of the dishwasher. It has a movable plastic mechanism sort of fitting which is dropping off everytime I open the tray to keep the utensils and unable to close it fully until I re-adjust the plastic to fit into the holes proeperly and then it works. I am not sure how to fix the problem, do I need an En


Hello Deepak,\015\012\015\012You can definitely fix this yourself, but I'm not entirely sure from your description which part is "dropping off". It may be a simple fix where something needs to be clipped back into place or you may need to ... Bosch 24 in. SGS69L02 Logixx Built-in Dishwasher

I have a GE dishwasher with the following model number: GSD3230F00WW. Last night, while the dishwasher was in the clean cycle, a buzzing/grinding sound came from underneath the dishwasher. I removed the access panel to try to isolate the sound. It appeared to come from a solenoid that was connected to an arm that opened and closed something. I am not sure if the solenoid is bad or if there was something that was preventing it from operating properly. I moved the arm to which it was connected


The part you are referring to is the pump out solenoid. ( part # WD21X10071) When the dishwasher is suppose to pump out, power is applied to the solenoid and it swings a flap inside the pump assembly to divert the pumped water out the ... GE Dishwashers

My Hotpoint Aquarius FDL570 dishwasher door suddenly won't close properly. With a hard push my husband cal fully close it and it still works. Does this mean that we need a new closing catch mechanism? If so what's the approx cost?


... Dishwashers

Dishwasher door will not close properly


Usually d/w doors are fine for long time.1. check if anything blocks it to close securely e.g. the cutlery basket or the dish racks not fully sliding in or may be off track/chanel.2. try running a cycle empty and see if it closes after doing ... Neff S51M53X0 24 in. Built-in Dishwasher

Item: Whirlpool Ultra Dishwasher Age: 3 yrs Problem: Not enough water to effectively wash the dishes. State: When the dishwasher is started, the fill valve opens as normal. Only about 1/2 the amount of water is let in when the pump turns on and the washing cycle begins. Opening the door shows that the water level does not reach the bottom of the float. When I close the door, the wash cycle begins again but stops after a few seconds. This is when the water begins to fill again. This time, the wat


Larry,The float is generally for overflow conditions and will interrupt power to the fill valve solenoid. If you are not filling completely in the time allowed by the timer, it is most likely a flow restriction in the water ... Whirlpool GU2400XTP Built-in Dishwasher

LG dishwasher LD1204w1 2 year old dishwasher just today has decided the door will not close properly top left hand corner..so it then leaks...


... Dishwashers

Our dishwasher is blinking CL - i think this means 'Close'... Even when the door is properly closed, it blinks CL and won't start!! Help!


Hi\015\012\015\012 \015\012\015\012Error CL appears when the dishwasher control\015\012detects door switch is open or door is open. You'll have to open the door and\015\012check the continuity of t ... Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

The Simpson Silencio 850 door does not shut properly and the dishwasher stops operating,but once you push hard on the door,the dishwasher starts again. There are no leaks ,but the door must have a sensor registering the correct pre-load force against the door seal , which in turn,allows the machine to operate. My machine does not work until you push hard against the closed door. What is the problem please?


... Dishwashers

Dishwasher door doesn't close properly - Hotpoint Dishwashers


... Hotpoint Dishwashers

My Kenmore dishwasher model #66515639000 quit working. It was washing dishes just fine one day and then the next the buttons weren't working properly. The pots & pans button was flashing with the cancel button. After searching on your site, I tried to resent the control panel by pressing the normal wash button and the air dry button 3 times then opening and closing the dishwasher. Now the quick rinse button is flashing. Any ideas of what to do now?


... Dishwashers

Hi - My Kitchen aid dishwasher door is not closing. Its only 4 yrs old dishwasher. Could someone help.


... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Hi i have a technika bellissimo dishwasher and the cutlery basket has perished, i need to find a replacement. Also, the powder, tablet dispenser does not close or open properly so i need to just put the tablet straight in the dishwasher is there a spare part for this? many thanks!


Make sure the top drawer is fully pushed in when closing the dishwasher - that fixed the dispenser problem for us ... Dishwashers

Kenmore dishwasher Have a kenmore 655.15889020 dishwasher which does not appear to be pumping water fast enough. No apparent blockages. Arms circulate very slow. Enough water in sump. Could it be the motor for some reason is running slow? Or maybe some valve is not closing properly.


Fatubu, are you sure you have the correct model number, Im not finding anything on the posted model. They had an issue on models close to this that had an issue with a twisted or missing seal in the pump assy. causing water to fill the pressure swit ... Kenmore 24 in. 16032 Built-in Dishwasher

The handle that opens the dishwasher does not operate properly, the dishwasher is about 5 yrs old what do you think would be the cost of the handle??


The labor will be the most expensive part and the part cost depends on the model you have. Expect to pay $25-$45.Eric ... Kenmore Dishwashers

FDB1050REC2 I have loaded my dishwasher and hit start and the washing light is just flashing. The door is closed properly and there is some water in the bottom of the dishwasher. It wont run the washing light just flashes... I have flipped the curcuit breaker but that didnt do any good.


Follow up to my Jun 02, 2008 post. We had a service tech come out\015\012today, and it turned out that the door switch was bad. The\015\012neutral side had continuity with the door shut, but the hot side was\015\012sporadic. A new switch has been ... Frigidaire 24 in. FDB1050RE Built-in Dishwasher

Dishwasher ZDF 511 Door not closing properly - Zanussi Dishwashers


... Zanussi Dishwashers

My dishwasher has stopped cleaning plates properly. It makes everything wet but at the end of the cycle the detergent block is half dissolved at the bottom. I have just run a cycle and opened the door during this. The bottom is full of soap suds and water and the top spray bar is dripping water after I open the door but when I close and then reopen a few secs later the top spray bar has definetly not rotated. The water is also not hot, this dishwasher is a cold fed only machine so I guess the el


Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... Zanussi 18 in. ZSF4123 Slim-Line Free-standing Dishwasher

We have a matsui mf160 dishwasher. The door wont close properly as the spring that closes the door in the centre of it has snapped off please help. Can we get a part to mend it?


... Neff 24 in. S5555X0GB Built-in Dishwasher

Blanco dishwasher door won't close properly. How do you get to the tab to adjust it? I'm assuming this is why there is no power to the dishwasher?


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1873 seconds