Having problems with your Indesit 24 in. D63 Free-standing Dishwasher ?

My dishwasher keeps tripping my electricity as soon as i plug it in i dont want to fork out loads of money on a repair man if i dont have too can anyone help read loads of comments but dont no what the element looks like


Answers :

Hello shellramsay,
\015\012If your circuit breaker continues to trip when you try to operate your dishwasher from the recpetacle that you plug it in to, then buy an extension cord ( appropriately sized ) and try another receptacle that is not on the same breaker. Although notthe best approach, it will work for you. You might have to hire an electrician to upgrade the service or to dedicate a receptacle for the dishwasher only and that would cost considerably more than an extension cord. Look at the dishwasher tag to see what it is rated for in terms of Power and get an extension cord that is as short as necessary and sized for that appliance..
\015\012Regards,
\015\012Rick
\015\012Also: Please contact me if the problem is not with the service but is the dishwasher itself and I may be able to assist in diagnosing that problem ...
I had a similar problem with my Indesit D63. The problem was caused when someone (ahem!) left the kitchen sink plug in. The diswasher waste is plumbed just above the sink's U-bend. This created a vaccuum preventing the dishwasher from pumping out the waste water. Eventually RCD tripped on the main fuse panel. Retrying with any other programs had the same effect.

What had happened was that the water reached the overfill "gun tower" - a plastic water level meter behind the lower arm slightly larger than a bottle cork. I guess this is a safety cut out to avoid flooding the kitchen.

I returned the next day and after doing some research, checked the water level which was just beneath the tower so I switched to soak, setting number 6 on the dial, ensured sink was unplugged and switched on. The washer stayed alive and completely drained in a few minutes. My guess is that enough of the hot water evaporated to reduce the overflow level.

My initial thoughts were that element or pump had gone. My plan was to try a cold rinse/soak, if it worked it was likely the element that had burnt out or let in water and needed replaced, if it didnt it was probably the pump. Thankfully it was neither.

DMPM

Repair Help & Product Troubleshooting for Indesit 24 in. D63 Free-standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My dishwasher keeps tripping my electricity as soon as i plug it in i dont want to fork out loads of money on a repair man if i dont have too can anyone help read loads of comments but dont no what the element looks like


Hello shellramsay,\015\012If your circuit breaker continues to trip when you try to operate your dishwasher from the recpetacle that you plug it in to, then buy an extension cord ( appropriately sized ) and try another receptacle that is not on ... Indesit 24 in. D63 Free-standing Dishwasher

DIrty Dishes SO i run a load a dishes through the diswasher and they dont come out clean. The original waste is gone but has been replaced by what looks like blended waste from the garbage diposal. I am wondering how you can declog the hose??? Or is it something else??? Thanks for your help.


Try running it through empty with some cleaner in it check all the in side for anything clogging it and then if you can put some hot water in it to loosen any grese ... Hotpoint HDA2000G Built-in Dishwasher

I have a Hotpoint LFT04 dishwasher which has now developed a fault. It runs and then stops mid cycle with flashing 2 and 4 lights as well as the power on/off button. Could anyone assist with the diagnosis as the manual does not help for this combination. From reading other similar models looks like heater or wiring fault?


... Hotpoint Dishwashers

Dishlex Global 300 Fills and then stops. faint electrical smell after a while . Checked heating element that I replaced 8 months ago, seems OK. It has 29X? ohms resistance and looks OK. (I am not sure of the reading on my meter but the element is not fused.) Pumps water in and out OK No blockage in pump or filters Water level looks to be low on filling, only part covers the heating element. I tried instruction book on changing water level using the "Eco" button no response as indicated in


You need to open the front cover and check the wiring for any burnt wire,this happen sometimes,if that does not solve then it't either pcb or electric motor causing this smell.You would be better off with a new one then. ... Dishwashers

I have an Indesit IDL500 dishwasher. It had stopped heating the water up, it looked as if it had short circuited and so i replaced it, i have power going to the element. A couple of forums state that it may be the pcb behind the timer/selector switch. Does this pcb control the program selection and heating of the element? or is there a thermostat that controls the stop and start of the heating element? Any help would be greatly appreciated


Hi\015\012\015\012The unit\015\012has two thermostats and you can test both of them for continuity before\015\012replacing, no continuity replace the thermostat. Hope\015\012this helps...please post back fo ... Indesit 24 in. IDL500 Built-In Dishwasher

Ariston dishwasher i have an ariston built in dishwasher. It wont start washing cycle, and has 2 flashing lights from the left (total 4 lights)...can anyone help. i cant find the model number on the machine. The lights looking like sprinkiling water..i have filled the salt, and rise etc but still it wont come on please help


I have a brand new ariston ll-64 and the wash cycle won't start and two flashing lights ... Ariston Technologies L63 Free-Standing Dishwasher

Hi, how do i install my dishwasher....i dont know where to connect the water supply pipe to as i dont seem to have a tap under the sink for it to be connected to, can anyone help please.


You'll have to tap into the hot water supply for the sink to get a connection for the dishwasher. This is a moderatley difficult plumbing task. If you don't have plumbing experience, it's probably best to call a plumber.\015\012\015\012 ... Dishwashers

My dishwasher is a swan sdw7030w, water is going in and out the machine but no water is getting through to man part wher dishes are, am putting it on and it's jumping from my choosen cycle to economy while beeping, the salt light and starish looking 1 are both on as well, can anyone help me? It was working fine n old house, could it possibly be my water pressure as I can't think of anything else as a woman. Please help me.


... Dishwashers

My kenmore dishwasher 665.17052400 clean light is flashing 7 times. I cannot locate the tech sheet to find out what is wrong. I have reset the panel and it will run then blink again after 15 mins or so. I have also done a hard reset and looked at the heating element, but it looks fine. Please help.


... Kenmore Dishwashers

My dishwasher is a swan sdw7030w, water is going in and out the machine but no water is getting through to man part wher dishes are, am putting it on and it's jumping from my choosen cycle to economy while beeping, the salt light and starish looking 1 are both on as well, can anyone help me? It was working fine n old house, could it possibly be my water pressure as I can't think of anything else as a woman. Please help me.


... Dishwashers

I have washed and rewashed my dishes with no soap and my glasses have a horrible white film and any of my plastics now have white film almost as if the soap is not rinsing off. I have resorted to hand washing and some of the glasses seem to be etched with this white residue....difficult to remove. Please help! I have read possible heating element problems but I just ran the dishes thru a wash cycle with no soap and when I opened the door the heating element seems to be functioning fine -- all


Hi,The scum, film and white residue problems have started since the reduction of phosphates in dishwasher detergents.Here is a tip that will help you to solve the problem of films, residue, and scum in your ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

My Bosch Exxcel Dishwasher has three warning lights flashing and the motor running but nothing is happening. I don't have a manual so can't look up the problem. Can anyone help please?


... Bosch Dishwashers

Electrolux Dishwasher DX403SJ - 30 Overfill fault but unit is dry. Overflow sensor intact and all looks good. Think we need a reset code. Can anyone help?


... Dishwashers

Zanussi DX6452 not heating up, replaced heating element but still no joy-please help!! What else could I look for?


Could be an element fault but check the pcb tracks on the main pcb that \015\012go to the heating element as this is a common fault/issue. track will be\015\012 blown around relay connection as a rule. ... Dishwashers

The nut that attaches to the heating element keeps cracking in half allowing water to leak on the floor. Does anyone know what might cause this problem. Thank you in Advance for your Help.


That usually happens when the material the "Nut" is made from is iron, steel, usually it should be brass or some other non ferrous metal, the constant heat/cool cycle fractures a ferrous one, try to get a brass or even maybe a copper "Nut". ... Frigidaire 24 in. FDB1050RE Built-in Dishwasher

Dishes in the upper rack no longer get cleaned. I've been using this dishwasher since 2004 (purchased new), and have not changed the way I loaded the dishes or the detergent. I called the Kitchen Aid help line, and the rep simply read the owner's manual to me (e.g., stand a glass of vinegar in the dishwasher and run a cycle), which did not address the problem. Any idea what I need to do? Thank you!


It may be full of crud under screen. Remove lower spray arm, tower up to top, covers and you will see where the entrance to the impeller is full of stuff. ... KitchenAid Dishwashers

I have a Knemore model # 16519201 Smartwash dishwasher. Everytime I wash dishes they are still wet. I have tried every setting on the dishwasher and they still finish wet. I have tried to look up this model # and I can't find anything can anyone please help. Thanks.


... Dishwashers

I have a 2 year old Electrolux ESL 63010 dishwasher, and it worked perfect until a few days ago, when it did not wash cleanly and the dishes came out cold. I read a few forums and it seemed to indicate the heating element. So I ordered one a fitted it, but still the water is not getting hot, or drying the dishes after the complete cycle. I have done a visual check of the PCB board, which looks clean and good. No error sounds, and it completes all programs, but with cold water and no drying. W


... Electrolux Dishwashers

My Miele dishwasher G851SCI is flashing intake/drain. I dont know what to look for. Please help!


... Miele 24 in. Novotronic G851SC Plus Built-In Dishwasher

Thor dishwasher Model No. D3764FS purchased in 2004, can't find users manual and have a problem ... A red light is showing up on the control panel just above a symbol that looks like a element ???? Have tried on the internet for user manual but had no sucess... Are you able to help me... thank so much


... Dishwashers

Just looking for some advice on removing the drawer from my servis washing machine, sorry I dont know what model it is. I need to clean the powder drawer but cant find any way to remove it from the machine. There is no internal part marked push that i can see and im wondering if i need to unscrew the four screws around the drawer. Help please! Cheers


Send an email to this address asking for the user guide for your model \015\012\015\[email protected] ... Servis Dishwashers

Dirty dishes The dishwasher in the house I moved into is a very basic model of approximately 1-2 yrs. old. In every load that I wash there are some dishes that are not cleaned properly. I do not have access to a users manual and was wondering if I need to set the water temperature? Can anyone help?


You need to take the spray arm off of the bottom and get down to the filter: there's probably food trapped in the filter somewhere, not able to drain out and it keeps recycling onto the dishes at each cycle. Good luck! ... Sears 24 in. 14181 Built-in Dishwasher

I have a brand new Miele dishwasher which has worked grate since it was installed 2 weeks ago. It keeps shutting itself off & indicates an F13 fault. I looked in the manual, see that water is going in fine & pressure is good. It then says to clean water intake filter. How do I get to that ? I don't have a user maintenance manual. I'm on city water & doubt that the filter is clogged but My wife will kill me if I don't get it fixed today. Can anyone help. Glenn


On my Miele 1220 dishwasher, the inlet filter is inside the inlet hose connector, where it screws onto the water supply. To clean it:\015\012\015\0121. Turn off the stopcock.\015\0122. Unscrew the inlet hose.\015\0123. Remove the black rubber s ... Dishwashers

I need a roller for a maytag quiet series 300 dishwasher. It is in the extending arms of the upper trey. can anyone help? i have looked at parts diagrams for this peace but it is never labeled


This guy seemed to figure out the solution...stainless steel replacements! http://www.maytagwheelhubs.com/Wheel_Hubs.html ... Dishwashers

My dishwasher will not drain. it goes through the first 10 minutes of a program then i get the OE error code. i have checked my hose for kink or clogged-there is none, i have made sure it was level. i would like to get the filter off but it looks like i would have to take the drain pump out from the bottom to check if any thing is plugging it. was just wondering if anyone has any tips that would help. thanx


1)check the drain pump working\015\0122)check any block from drain pump to drain hose. ... LG LDF6810 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1073 seconds