Having problems with your Jackson 25 in. TempStar HH Free-standing Dishwasher ?

Wrong voltage rating

\015 I purchased a used Tempstar HH that is rated @460VAC 3phase, I have only 208VAC,3 phase available. Can I convert this unit to run on 208VAC? Steve\015

Answers :

Hello. If the unit is rated 460v, 3phase, the only way you can get it to meet your supply of 208v, 3phase, is:
a) have a transformer installed to make 460 from your supply by an electrician, or call your power company and see if 460 could be supplied to your building, but it would only be for that machine.
or
b) replace the heating elements for the 208v supply, have the pump motor checked to see if it will work on 208v, and a control transformer for the control circuit, as well as all the wiring related to the pump and heaters, as on 208v, they will draw more current than on 460.
so, can it be done? yes. Is the expense worth it? only you can answer that, However I would suggest that you resell that machine, and get the correct one from the start.

Hope that helps, and thank you.
No its not able to be converted that way you wouldn need to change your current to match that of the dishwasher
Repair Help & Product Troubleshooting for Jackson 25 in. TempStar HH Free-standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Wrong voltage rating


Hello. If the unit is rated 460v, 3phase, the only way you can get it to meet your supply of 208v, 3phase, is:a) have a transformer installed to make 460 from your supply by an electrician, or call your power company and see if 460 could be sup ... Jackson 25 in. TempStar HH Free-standing Dishwasher

I have a GE Profile Dishwasher, Model# PDW7880J03SS that doesnt dry the dishes. I pulled out the dishwasher and checked the heating element for continuity with my ohm meter and got a closed circuit reading. I tested the voltage going to the heating element and got a 124V reading. However the dishes are still soaking wet after the drying cycle. What am i missing, what else could be wrong with the machine that the dishes won't dry at all?


Hi\015\012\015\012Check if the dishwasher is draining and filling properly is water temperature. Water temperature should be between 120 and 140 F. If water is not hot enough then heating element has gone bad, to check the element you'll ... Dishwashers

Hobart LXIC under counter comerical dishwasher. Delime lled keeps comeing on every time power up. Checked sensors on bottom in the water drain area senser on right (there are 2 next to each other on this unit I think other is water temp) the wire had wire burn completely off. I reconnected the wire and started to burn up the wire again. Question: 1) Is this sensor for the Delime sensor? 2) does it sond like the sensor is shorted to you? or sending wrong voltage to sensor? 3) If no


... Hobart 24 in. LXIC-5 Built-in Dishwasher

My Kitchenaid dishwasher (model KUDS02SRSS0) keeps burning out my dispenser. First I replaced the dispenser, then I replaced the control board and dispenser, it worked for two weeks and now I have a melted solenoid again in my dispenser. I've measured voltage to the solenoid and it is getting 110V through the entire diagnostic cycle. This is wrong. It should only get power at some point during the cycle to open the dispenser. It appears the control board has failed again and in the same wa


HI. The relay that controls the voltage and timed release command, via logic chip, is indeed damaged(stuck on). This is a common theme with this particular design. The original control board was recently replaced with a substitution model ... KitchenAid 24 in. KUDP01DLBS Free-standing Dishwasher

I have 3phase in my shop. I have a new machine that is rated for 208v 3ph. how can I tell what my incoming voltage is?


You will need to take the cover off of the breaker panel. Find the three lugs that the incoming hot wires are hooked to. With three phase you will have three hot lines. Check the voltage between the phases. L1 - L2- L2- L3- and L1 - L3 Also check the ... Jackson 25 in. TempStar HH Free-standing Dishwasher

Verifying breaker rating of AM-14


Commercial dishwashers don't take it for granted that the hot water is hot enough to sanitize. And, they know restaurants need to turn dishes.So there is enough heat to make sure warm water heats up quickly to sanitizing temperatures. ... Hobart AM14-253 Free-standing Dishwasher

My Bosch silver edition dishwasher stopped working while washing. It seems the power stopped. I have checked all the wall plugs and the fuses and there is nothing wrong with that. the power cable looks fine too. what is wrong with the machine? hope you can help. regards j


Just repaired one last week.Same issue.\012\012Do you know how to use a multi meter?\012\012If not watch this video. It will come in handy.\012Click on the link ... Bosch Dishwashers

Hi, My LS2020 ariston dishwasher was in normal wash & stayed there for 2 hours, it washed but the dial would not move any further, then I decided to turn it on to Rapid wash, it filled and leaked all the water outside on to the kitchen floor- what is wrong? I checked and made sure all hoses are ok. Please tell me what is wrong with my dishwasher? Maria


... Ariston Technologies LL64WNA Built-in Dishwasher

I wired my Bosch Dishwasher wrong and did a quick wash with it. Later on it stopped working and I figured out I had wired it wrong. I then disconnected it and rewired it. It buzzes for a bit then swishes some water around inside then buzzes again. When I open the door after it says clean it has murky water in the bottom like it was mixed with soap but never emptied. What did I do?


I hope this is not a quiz. Can you please clarify what component did you wire incorrectly inside the dishwasher? Did the dishwasher have a fault that you were trying to rectify.\015\012\015\012it will also help if you provide the full mod ... Dishwashers

My 2008 frigidaire 24" dishwasher model #FDB1050REC is not washing during the cycle. I have run the test cycle and the tub is filling up and draining but no washing is taking place during the wash cycle. The dishwasher has an electronic control board and therfore no mechanical timer. I put test leads to check for voltage on the power leads to the main washing pump, which I have already replaced with a new one, and I'm only registering a low voltage of around 10 or 11 VAC. With the cycle off I'm


If you have replace the motor and this did not fix your problem then yes replace the control board ... Dishwashers

My Baumatic bdw13 was working fine (for 3 years) now water not heating up what could be wrong? Theres nothing wrong with the hot water have even tried turning the kitchen tap on first although never had to do that before?


You may need a nea eliment ... Baumatic 23 in. BDW13 Built-in Dishwasher

Hi. I have a Danby DDW396W countertop dishwasher brand new yesterday. We unpacked it, installed it onto taps, loaded it with dishes, and turned it on. That's where everything went wrong. When you turn it on, the display shows P2 and when you press the program button to change it, nothing happens. When you push the start button, nothing happens. What am I doing wrong? I know I'm missing something simple, but what? Please help. Katherine


Hello there and thank you for choosing fixyaThe p-2 code is a wash cycle that is the normal cycle for this unit please see below.Press the program button until the desiredprogram code appears in the display window.The ... Danby Dishwashers

G851 SC Plus started to trip GFI plug. Called Miele and they said there was nothing wrong with the dishwasher and the GFI was faulty. Unplugged from GFI and plugged into regular plug and it worked for a few days. Eventually stopped running. How wrong Miele was, it had everything to do with the dishwasher and not the GFI. It was only warning me a problem was coming. Appliance man came out, noticed water in bottom pan and order new pump, said seal probably gone. Came back, replaced the pump, put d


... Miele 24 in. Novotronic G851SC Plus Built-In Dishwasher

I am looking at buying two different ( I think) GE Dishwashers. 1 The "GDWT260R10SS" which in the Sears site says its Energy Guide rating is 280 or the GDWT260RSS which the GE site says 384 kWh. ARe these the same units and if so why the different model numbers and energy ratings?


... Dishwashers

My Frigidaire Ultra Quiet 1's soap dispenser is not opening during cycle. I have taken the dissimilar metal device off and applied ac voltage. It worked, leaving me to believe that the timer is not supplying voltage to the device. Advice?


... Frigidaire Dishwashers

WHAT IS DECIBEL RATING FOR MAYTAG MDBH955AWW


... Maytag 24 in. MDBH955AW Built-in Dishwasher

Tricity Bendix Washer Dryer TBWD 1210. Perhaps pushed wrong button/s but it won't start. Any ideas??


... Roper Dishwashers

Frigidaire dishwasher model # FPHD2491KF stops at about 102 or 103 and the water stops coming in. I have to trip the breaker once or twice to get it to work..what is wrong?


Sounds like the unit has a faulty timer or bad communication from the control board to the timer. I personally would contact a tech if this continued or a different alpha-numeric error code is displayed. ... Frigidaire FPHD2491KF Dishwasher

My washer vibrates and has low pressure, whats wrong


Add some oil to the hydrailic pump it may be low. ... Northstar Professional Series Pressure Washer 4000 PSI

Pressure Washer trouble The Engine Won't Turn Over. What's Wrong?


Well for starters if you let it sit all winter you the pump probably froz up and you might be able to get it un jamed by pouring in oil (any kind) in the hose inlet and let sit one night the try starting ... Karcher 2500 PSI Pressure Washer

No problem, just looking for gal. per minute flow rate


It uses 1.2 gallons for each wash or rinse action in a cycle.  The water only runs until the 1.2 gallons amount is reached and then that water recycles through the pump for the duration of the action.  Start the dishwasher and time how long ... Amana 24 in. DWA33A Built-in Dishwasher

Dishwasher ran with wrong soap


Add some salt in the cabinet and a bit of water. salt acts as a foam suppressant ... Miele Touchtronic G892 Built-in Dishwasher

How much voltage should go to the fill solenoid?


Most times it120v look at the wiring diagrams ... Kenmore 24 in. 16032 Built-in Dishwasher

Water doesn't go in and he couldn't see what is wrong with machin


I would take a look at the inlet water screen on te water fill valve and be sure thatits cleared. look where the water goes into the unit and that is where the valve is and screeen is going to be where the water goes into the valve. ... Ariston Technologies L63 Free-Standing Dishwasher

Flow Rate Question


The flow rate in litres per minute (or litres/hour) is a very important measure of the cleaning ability. DIY machines commonly have flow rates as low as 6 litres/min. Heavy-duty industrial units vary from 10 to 40 litres a minute. ... Psi Blue Max 2200 High Pressure Gas Power Washer
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0287 seconds