Having problems with your Jackson 25 in. TempStar HH Free-standing Dishwasher ?

Does this machine require a booster heater? If so,

\015 Does this machine require a booster heater? If so, can it be electric?\015

Answers :

Maybe and probably. Speak with your Jackson distributor about this. He probably has a solution for you that is compatable with your equipment.
\015\012
\015\012Thanks for your interest in FixYa.com
Repair Help & Product Troubleshooting for Jackson 25 in. TempStar HH Free-standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Does this machine require a booster heater? If so,


Maybe and probably. Speak with your Jackson distributor about this. He probably has a solution for you that is compatable with your equipment.\015\012\015\012Thanks for your interest in FixYa.com ... Jackson 25 in. TempStar HH Free-standing Dishwasher

I press the trigger on my steam booster and the steam will not release, but there is pressure building up in it.. Is this a defect, and does this make this machine danger. How safe is this machine? An


You better have a working safety release valve or run faster than flying metal schrapnel. ... Pressure Washers

When switch on button in on position, display showing 180 min wash time and saying machine requires salt and rinse aid, but machine was topped up 2 days earlier. Also sounds as though the pump is constantly pumping. All display lights on front of door went out.


... Siemens SE24A230 ExtraKlasse Built-In Dishwasher

Reset code I recently had a problem with my dishwasher that required me to use a reset code on my control panel. I can no longer find the manual that tells me that code. I was wondering if anyone knows it as to save a tech call. The error occurs when the clean light flashes. We have checked the heating element and the tech told us there is no problem there, we just need to reset the machine. The error has occured again, but this time because I tried to run the machine right when we came home fro


I believe the reset sequence is accomplished by pushing the NORMAL WASH then HEATED DRY buttons in that sequence two to three times. The unit will enter diagnostics mode, but can be stopped by pressing the CANCEL button. Let me know if this helps. ... Whirlpool 24 in. DU1050SS Built-in Dishwasher

I have a Maytag quiet series 400 dishwasher. I set the required buttons for a wash, inserted the soap in the soap tray but the machine will not start. Previously, when the washer would not start, I opened the door and pushed down on the soap tray and its seemed to fix the problem. Next time I used the machine, again not starting, but by pushing on the soap tray it would not start. Can you suggess what the trouble may be or give me a check list that I may do before starting the washer. This machi


... Maytag Dishwashers

500HT machine- does not consistantly come up to temp on the booster cycle, element and booster tank my be mineralized and needs cleaning??- cuts out sometimes during cycles- wondering if it is a dirt problem and just needs a good cleaning and blowout- what is the best way to clean the contacts??


... Moyer Diebel 24 in. 501HT Built-in Dishwasher

Hobart LX30 Hey I just bought a Hobart Lx30 and we don't have a power source that can handle the 50 amp requirement. We got it at an extremely good price so we are trying to work around it. I was told that disconnecting the water heater would allow it to work in a standard 120 volt outlet. I did that and now I have another issue. The machine wont run unless the water is 160 degrees. How do i disconnect the sensor that restricts the temp so that I can run the machine at a lower temp?


Hopefully you took the suggestion to run the correct 50 amp 208-240 service to the unit.Converting the unit to an LX30C has a couple of pitfalls. The LX30C is connected directly to the incoming water supply, which should run 120-140 degre ... Hobart 24 in. LXIH-3 Built-in Dishwasher

Hi on one of our offshore rigs we have a AMX-16 dishwasher we require a parts manual for this machine so that we can order a new bottom spray bar we would also like to have a user manual for this machine


Hi rrydlewicz\015\012\015\012I am on the Total Dunbar in the North sea Northern sector. I have an intermittent fault code problem I would like to solve, did you ev ... Hobart AM14-253 Free-standing Dishwasher

Is there an air gap required between floor and machine model LXIH. Water is collecting under machine causing floor damage


I would check your vaccum break upper rhight back corner, but no there is no such requirement for this model ... Hobart 24 in. LXIH-3 Built-in Dishwasher

We have been using this model since Sept. 2007.When new, it worked very well. It has over time, performed less then we would expect. Not only do we have to scrub dishes by hand before placing them into washer,they some times require hand washing after being washed by machine. Not only are they dirty, the glasses are covered with a cloudy white film. We have not done any maintenance or service to this dish washer. Does this washer require some sort of service or attention. Please advise. Thanks


... Jenn-Air 24 in. JDB1250 Built-in Dishwasher

Diplomat ADP8224 The thermostat on my dishwasher (Diplomat ADP8224) has tripped and requires resetting. This has been carried out by an engineer who seems to reset somewhere under the machine. I have tried to locate the reset but with no success. Any ideas where this is and how to carry out reset


... Bosch 24 in. SHU43 Built-in Dishwasher

I'm trying to clean the dishwasher by using FINISH Dishwasher Cleaner. It requires the hottest setting for the liquid to be dispensed. I ran the machine on Auto Super Wash cycle the first time, and the cleaner container's wax cap didn't melt so the cleanser didn't even get used. What should I do?


... Bosch Evolution 800 SHE58C05UC Stainless Steel Built-in Dishwasher

I have a Ryobi power washer with subaru motor, model #RY30080. I bought it 3.5 years ago. I only used it one time as purchased. This summer,it did not start. Yes, I left gasoline in the unit. I did not know that it require to drainout the gas prior to winter storage. Help, what can I do to get this machine starting again. Used only one time.


... Pressure Washers

Our school uses a UH-150B dishwasher. Is there a filter or screen in the back of the machine that needs to be replaced or cleaned periodically? We had it serviced once and the repair man mentioned it but I got that second hand as I was not with him as he serviced the washer. In short, what routine maintenance is required by us as users of this washer?


... Champion 24 in. UH-150B Built-in Dishwasher

Strange behaviour! Hi. Our machine has been unused and plumbed in since we moved into the property (18mths ago) and not required its services until recently. After filling with appropriate rinse aid, salt etc.. We choose the appropriate cycle [1. Intensive or 2. Normal], turn on and after approx. 10 seconds the cycle stalls and we hear a continuous ticking sound..!?  We open the door and everything is bone dry! Has any body experienced the same problem? Many thanks


I think it has to do with a faulty program disc. it can't switch to the next program phase. try turning it a bit. ... Indesit 24 in. D61 Free-standing Dishwasher

Our Lamber GS900 underbench dishwasher machine did not fill the hot water anymore so we have to pour hot water manually until it reached the required level. It drains perfectly and work as it should be.


Check the float switch. If the float is stuck or the switch is jammed or broken, the d/w will not fill. ... Dishwashers

I require a manual for a Maytag jet clean dishwasher, super capacity - Quiet Plus II, model number MDB6000AWW, serial number 13585595SY. Best quess is that the machine is 11 years old. It came with the house we just purchased. Any suggestions are very much appreciated.


Your dishwasher was manufactured in November of 1986. Uh...its actually 23 years old, which could be why I had a hard time locating a manual for you. I was able to find a manual at the following link:\015\012\015\012 ... Dishwashers

Whirlpool ADP 5966 Dishwasher using the complete salt load in 6 washes and coating all the dishes in salt that would not rinse off. I filled the salt and 6 washes later it was requiring a new load of salt. We have had the machine for 5 years no trouble The problem is a complete overload of salt coating everything in the rinse water and drying on during the heated drying cycle. The problem is not caused by the following Cracked of failed seals on the lid to salt compartment N


... Whirlpool 24 in. ADP5966 Free-standing Dishwasher

XL30 Hi temp. Two problems: 1) Hi temp booster not working...worked on and off for awhile, now won't get up to 180. 2) Turned on today and water flooded out. Water overfilled machine, turned off and heard pump drain unit.


To attempt to solve the over filling, clean the probes in the back right corner. Use a green scrubby pad.\015\012\015\012There is also two probes under the front screen. Clean them too.\015\012\015\012As far as the booster not ... Dishwashers

Miele G572 is not cleaning dishes correctly, I have pulled all arms off and cleaned, cleaned filters. Powder is not been flushed completely from door. Does the machine require servicing?


Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... Miele Premier-Plus Built-in Dishwasher

I have a Bosch dishwasher model no. SHU66C05UC that does not drain properly. After checking for a clear drain tube and finding no problem. I removed the left side panel and found that the red float was not rising in the tube. If I pull up the trigger device to engage the pump switch the machine drains. What causes the float to stay down and what is required to free it? Thanks for any help.


Water in the base. ... Bosch 24 in. SHU66C05 Stainless Steel Built-in Dishwasher

Hobart dish machine low wash temp


I have the same problem at a customer account of mine. We have checked the wash arm O' rings, drain isn't leaking. Curtains are in place, we even changed the wash tank element because the one in it was scaled up. We turned the idle temp. up to 170 an ... Dishwashers

New install, used machine, need an old manual.


I'm too late for you but others could be helped. With the power off' make sure the timing cams are set to the beginning of cycle, Then push the cams with a finger untill the fill cam switch just activates. Then put the power on,close and latch door a ... Moyer Diebel 401HT Dishwasher

On no programn does water enter machine


... Tricity Bendix 24 in. BDW53 Free-standing Dishwasher

Running a Hobart LX30h as a low temp sanitizer


I can not verify this so DO NOT do this until you find out for yourself!\015\012 I am told that you can actually change the settings on the control panel to the LX40 mode by jumpering J1 and J2 then and then use the up down arrows until you see ... Hobart Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0418 seconds