Having problems with your Jackson Dishwashers ?

I need part for Jackson JPX300 Universal Timer 5945-003-07-48. Can you supply this for me? How much? How long to receive it?


Answers :

Repair Help & Product Troubleshooting for Jackson Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need part for Jackson JPX300 Universal Timer 5945-003-07-48. Can you supply this for me? How much? How long to receive it?


... Jackson Dishwashers

I must have the only Jackson model 10a that is rated at 110 vots. Jackson says they once made a 10LT but have little docs and no parts. I need a wash heater element. It has threads and is supplied with 110v through a SPST switch. ANY help is appreciated Thanks Tony 201-780-1383 [email protected]


... Jackson 10APRB 36 in. Dishwasher

No heat up of water or any temperature raise . Dryning not in functing either . Heating element without voltage supply, during normal sequence of operation. Has found relay Eberle with part no T-nr 3940620 in investigation of electrical loop. Please come up with a possible malfunction . Thank you very much Best regards Erik Rasmussen


... Miele 24 in. G665 Built-in Dishwasher

I have a Dishlex Global 450 dishwasher and have a faulty seal to replace. The original door seal had a foot on each side and the replacement I received has 45 degree cuts and no foot. Also the bottom seal replacement appears to be a screw-in type where the original was slipped behind a fold in the door. I have been assured by the supplier that I have received the correct replacement parts. Could you confirm the these parts are in fact correct and if they are which way should the seal lip an


Hello Tony. I am as concerned as you are that this is not the correct replacement part. The key to getting the right part is the model number which is on your machine, if you know where to look. Do this, go to this link to properly locate your mod ... Dishwashers

Maytag MDB8859AWS, cover latch that's a part of the detergent dispenser came entirely out of the hole that the long spindle on the end of the cover latch fits into it. Does this mean the part's broken? Now the detergent dispenser won't open automatically. I can TRY and close the cover after I put the cover latch's long spindle back in the hole, but something doesn't seem right. Only three months old!


... Maytag MDB8859AWS Stainless Steel Dishwasher

I need to locate a circuit board part for a miele dishwasher G692 SCI PLUS. The part number is EPL 545-A. M.-NR. :05491860. iF YOU CAN HELP ME FIND WHERE I CAN BUY THIS PART IT WOULD BE MUCH APPRECIATED.


... Dishwashers

Bosch dishwasher,exploded parts view,SHU33A05UC/46


... Bosch 23 in. SHU33A Built-In Dishwasher

I purchased a Bosch dishwasher and had it installed into my new kitchen. It is plumbed and it does not work, a reapair man said it needs a new motherboard. My issue is that Bosch can't seem to supply central Wi. with this part. The repair place put the order in two and onehalf months ago and still cannot give me a date about when the part will be in. I have owned this dishwasher for five months and have not been able to use it once!


... Bosch Dishwashers

I installed according to guide, but dishwasher will not fill with water. Pump sounds much too loud to be normal. Wiring was checked three times for correct connections. Water supply was checked twice for water getting through, no leaks and water supply on. Drain hose is connected correctly and is connected to house drain.


You state the water supply is on.\015\012Have you loosened the compression nut at the dishwasher ell to see if you have pressure to the water inlet to the dishwasher?\015\012Remember the dishwasher will always run a little to make sure an ... Whirlpool GU2400XTP Built-in Dishwasher

Good Morning, I have a LG dishwasher, model LD-2052SH. The included water supply hose is 1.5 metres long, I would like to purchase a 2.5 metre long hose. Could you please give me details as to where I could obtain the hose. Thanking you in anticipation.


... LG Dishwashers

The upper spray arm on our dishwasher has become detached from the back of the machine, and there is no obvious means of reattaching it. Are there some clips perhaps that have snapped on the part which attaches to the back wall of the d/washer (part number PP-TD20 - it's a 4 by 1 1/2 inch long rectangular shape with rounded ends) or does this piece somehow need to be taken apart (how - i can't see how i might do this?) and the transparent 2nd layer underneath get attached first? Thanks, Sarah.


What exactly the brand / model of your unit.?Let me know.Thanks ... Dishwashers

I have a Bosch (SHU5302UC/U12). The washer often takes 2 or more hours to run. Sometimes it gets stuck for a long time part way through (e.g. just sits at "43"). Other times, it gets stuck at 1 and won't stop on its own. The latest thing is 2 dots have appeared on the display that I've never seen before. For example, instead of "43", it reads "4.3." Eventually it gets to "C.L." but does not stop running. Also, its been making very strange noises during part of the wash cycle.


... Bosch 24 in. SHU43 Built-in Dishwasher

Jackson dishwasher Yes I have a jackson jp-24b series dishwasher....I am having problems with the thing that spins on the top it keeps on popping up during a wash...I was just wanting to know if it needed a rubber seal of some type or does it not have a seal on the part dat spins....my email is [email protected]


No there is no seal keep the wash arms clean if the last hole gets stopped up then it will spin backwards and cause it to come off \015\012otherwise go to home depo and get a oring that fist over the threads on the breaing and tighten by hand ... Jackson JP-24B Built-in Dishwasher

Just ordered and received replacement part 1013282 kohler fill valve assembly. it did not come with the sheath. apparently it is a seperate part but has been discontined. is there a replacement for the sheath or no longer needed?


... Kohler 1013282 FILL VALVE ASSEMBLY

I have an Electrolux dishwasher model EIDW6305GS1. It's been broken 3 times in a year! The error code 03 is on now, meaning that the wash pump is bad. How hard is to replace this part? How long should this part be expected to last? This machine is only a year and a half old. Thanks


... Electrolux EIDW6105GB 24 in Builtin Dishwasher

I have a model 665.1576 or 1676 my paperwork does not have the number on it and no part number on he machine, but I ordered parts from the catalog which matched. about 7 years old, stopped draining, so I changed the Seal kit, pump base seal, impeller, plus drain cover gasket but not the pump gasket could not find it, reinstalled, pump works but much slower and times out, have to hit drain button to get all water out. Keith


... Kenmore Dishwashers

Fills ok wash ok at 156 degrees goes into rinse cycle dont seem to have much water comming out shows 0 degrees rinse temp. screen is out so thats not clogged have separate free standing electric heater piped in has been working fine for 5 years that way dont understand 0 degree water temp. on display any help would be great thanks for your time joe


... Hobart AM14-253 Free-standing Dishwasher

How long should a normal wash cycle take for a kitchenaid dishwasher type 577 0


... KitchenAid Dishwashers

I have a Maytag MDBH 965AWW Dishwasher. I replaced the latch assmembly because the handle had cracked. I replaced it with Part w10130697 from Johnstone Supply. Now when I power the dishwasher up I


... Dishwashers

Whirlpool Silent Partner 1 Dishwasher running too long in wash cycle


I feel sorry for next guy who sells you another appliance :) ... Whirlpool 24 in. DU1055XTPS Stainless Steel Built-in Dishwasher

I have a hotpoint DF 42 ultima micro dishwasher and it bleeps to tell me that it has finnished a wash but bleeps constant and has not finished the wash what could the problem be and how much will it cost for the parts thank you Janet


... Dishwashers

Where can I get the instruction manual for a Bosch Classixx Dishwasher SGS53C12UK? I have bought a second hand dishwasher that has only been used for 6 months. The programme works fine but when I go to use it again - check water shows on the display. I have to tilt the machine back as water is stored at the base of the machine, surely this is not normal? It there a simple solution to this or alot of cost involved with a new part? Any help would be much appreciated. Thank you.


... Bosch Dishwashers

Hose hookups My Bosch SHU43 dishwasher has no manuals. My problem is that I have one long hose that should be the discharge hose but no fitting to hook it to my disposal nipple. My other problem is there is another hose that exits the dishwasher about mid level but does not hook to anything. Should this hook to the supply?


The smaller hose should be 3/8" is the water feed the larger hose is the discharge. you can open the front panel (2 torks screws) and you will see the water inlet valve in the left towards the center the electrial box is on the far right ten determin ... Bosch 24 in. SHU43 Built-in Dishwasher

Asko model 1485 Type, DW 95.3. No water supply. Inlet valve needs replacement? Where can I find a parts repair manual for this unit?


I have an ASKO 1485. It overfilled and know it will not stop flashing the lights on the panel. I have manually removed the water ... Dishwashers

I have a B&S pressure washer that has sat for a long time and it had fuel in the tank. What can I do to make it run again without replacing parts. It was only used one weekend two years ago.


... Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0819 seconds