Having problems with your Jenn-Air 24 in. JDB1080AWS Built-in Dishwasher ?

Dishwasher won' t start. None of the lights are coming on


Answers :

Dishwasher wont start. none of the lights are coming on.
Repair Help & Product Troubleshooting for Jenn-Air 24 in. JDB1080AWS Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Our AEG Favorit 50620 dishwasher won't start. When I push the power button, the power light comes on, but none of the other lights. Pushing the function buttons has no effect. The door is fully closed, and it was working perfectly before. I have tried turning it off and on, unplugging it etc. Nothing works. Interestingly, if you push more than one function button at the same time, some of the function lights come on, but then when you try to start the cycle it still won't work. Help!


... AEG 24 in. Favorit 40650 Free-Standing Dishwasher

Dishwasher won' t start. None of the lights are coming on


Dishwasher wont start. none of the lights are coming on. ... Jenn-Air 24 in. JDB1080AWS Built-in Dishwasher

My dishwasher won't start when push the button , you can't put it in normal cycle and the a very faint light comes on the start but it won't start, lights stay on cycle and then go off. Any suggestions


... Maytag Dishwashers

We have a Maytag MDBH950AWS Dishwasher that won't start. When you press the start button the cycle light, washing light , heated dry, sanitize and extra rinse lights all come on the dishwasher fills with water and after a couple of minutes it shuts off. Any ideas what is wrong? Thanks


I have Miele incognito that when I shut the door it does not turn on? Not sure why it stopped working all the sudden ... Maytag 24 in. MDBH950AWS Built-in Dishwasher

My dishwasher won't start (Series 300 purchased 14 months ago). The following lights are on: light wash,hi temp wash,sanitize, locked and the start /resume light is flashing put goes out when pushed and the machine does not start when closed. there has been an on going problem with the regular wash light not coming on when pushed.


Hi\015\012\015\012It may be an issue with heater circuit, door switch or wash pump. If yes then please reset the power to the dishwasher. After, 5 minutes check if you are still getting t ... Maytag 24 in. MDB9750AW Dishwasher

My Dishwasher starts, then stops after 30secs and won't continue draining. Everytime I turn it back on it comes up on the steam cycle and won't go to any other cycle, drains for 30secs and stops again. Power light is flashing. Have tried holding power button down for 10secs with no effect. Filter is clean, pipes are straight-no kinks. How do I get it to start working again? It is a whirlpool dishwasher, ADP5550.


... Dishwashers

Dishwasher will not start, no lights come on. There is also standing water at the bottom. Can you help point me in the right direction? Went to start the dishwasher and none of the controls on the panel are working or lighting up. I checked the fuse box and all fuses are good.


... Frigidaire 24 in. GLD2350RC Energy Star® Built-in Dishwasher

My Jenn Air dishwasher won't start. The cycle lights come on, but the start button will not work. Also, some of the cycle's won't light up. I can only choose some of them, like I can't choose heavy wash or rinse only.


... Jenn-Air Dishwashers

I have a maytag dishwasher model MDB7749AWB1 that suddenly won't start; i push the cycle that i want and push start and the light comes on like its going to start but then in about one second it starts blinking and the dishwasher never starts.


... Maytag Dishwashers

Hi, I have a Kitchenaid KUDI01TJWH0 dishwasher that failed. Any of the front control buttons like Heavy-Normal-RinseOnly or even the HiTemp-EnergySaver .... when you press any of these, the corresponding light for it will blink three times and go off. Normal operation that light for that button will come on and stay on. but none of the lights stay on. If you press start, the 'water heating' light will come on and you will hear the pump run for about 10-15 senconds, and then everything goes off


Hi Your Problem is Probably The Control Panel. Not The Electronic Control. The Plastic Piece Across the Top of the D/W, Which Tells the Control What to do But You Must Realize These Parts Can Be Very Expensive. John H. Been in this Business 35 Yrs ... KitchenAid Dishwashers

Maytag Quiet Series 800 dishwasher won't start. The only button that I can get to work is pressing and holding the locking feature--that light eventually comes on. A couple of times I came back in an hour or so or the next morning and hit the start button and it started right up. Now it won't start at all. VERY FRUSTRATING!


... Maytag 24 in. MDB6100A Built-in Dishwasher

The faceplate sometimes does not respond when I touch it, or if it does It may not let me cahgne the settings... Plus when the lights do come on the dishwasher won't start when I press the start button. When it does come on it works fine and has not had any other previous or current issues. Please HELP before I start whacking a hammer on this faceplate...


I also own a ADB1500AWB. The switch membrane failed within 30 days of purchase. It was replaced under warranty. The technician said this part fails very often. I bought an extended warranty. It failed again on 9/3. As of 10/13, the part is ... Amana 24 in. ADB1500AW Built-in Dishwasher

I have a Kenmore Elite 665.15954000 dishwasher that won't start. The timer light will come on, but when you press start, it will go off after about a minute. The cancel drain function will work. All option lights work, but never any response after pressing start.


... Kenmore Dishwashers

I have Whirlpool dishwasher about 3years old it is the ADP7966 AAA 6th sense. When I put it on and turn the temperature knob, only the first temperature green light comes on althou I can turn the knob all the way round none of the other lights come on, my rinse aid and salt programmes light up thou ,and when I press the start button it flashes twice stops a bit then flashes twice again, and thats all it keeps doing. I would be very grateful if you help to solve the problem. Many thanks to you.


... Dishwashers

Hello - On my KitchenAide model nbr: kuds01flss0 Dishwasher the the cancel light blinks constantly and only the rinse light will come on. Also it won't start even when the rinse light comes on.


... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

Dishwasher malfunction The Normal Cycle light is blinking red and won't quit. None of the other cycle lights will light up and it won't start.


Which is your brand and model? ... Dishwashers

Dishwasher won't turn on, lock light comes on when I try to start


My husband found the solution on line when he googled the problem. He read that the drain could have been blocked, or it said press the drain button. That did the trick, and now I have clean dishes! He didn't have to pay anyone to solve the problem w ... Maytag 24 in. MDB8600AW Jetclean II Built-in Dishwasher

My Kenmore Dishwasher 587.1523 won't start. It is getting power, and the lights come on as normal when the Start button is pressed, but the lights turn off after a few seconds.


... Dishwashers

My Kenmore Dishwasher 587.1523 won't start. It is getting power, and the lights come on as normal when the Start button is pressed, but the lights turn off after a few seconds.


... Kenmore Dishwashers

We have a kenmore dishwasher mod.#.665.17032401 . the normal ,china gentle &high temp lights won't come on. all other lights work but still won''t start.


... Kenmore PRO 24 in BuiltIn Dishwasher with Ultra Wash HE Filtration 13173

Won't start The last time I used the dishwasher (built in), it smelled of burning. I turned it off and now although the lights on the control panel come on, the dishwasher itself won't run.


... Zanussi 23 in. ZDI6041 Built-in Dishwasher

I have a jenn-air dishwasher jdb-5. The light panel only comes on if I press the time-delay button. I cannot start it and none of the other lights come on. Please help. It is not the outlet nor a blown fuse.


A new control panel is the only solution.as its the problem of short circuit on the control pannel board due to which its blinking lights as you touch particular buttons.as replacing the pannel will solve your problem.\015\012 ... Dishwashers

My Frigidaire dishwasher won't come on. The cycle lights only flash when I push start.


... Frigidaire Dishwashers

Maytag Dishwasher MDB8951BWS start light won't come on


... Maytag MDB8951BW Dishwasher

Hi. My electrolux dishwasher (DX403WB*06) won't turn on. It was working fine until this morning. The 'start' button seems stuck in, but the lights don't come on and I can't select


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2230 seconds