Having problems with your Jenn-Air 24 in. JDB2150AWP Built-in Dishwasher ?

Does the water supply hook up to hot or cold input line?


Answers :

Cold water in ... the machine will heat it if necessary ...
Repair Help & Product Troubleshooting for Jenn-Air 24 in. JDB2150AWP Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Does the water supply hook up to hot or cold input line?


Cold water in ... the machine will heat it if necessary ... ... Jenn-Air 24 in. JDB2150AWP Built-in Dishwasher

Dishwasher I have a whirlpool dishwasher that does not appear to be getting hot water. The washer water is cold initially and only seems to get warm once the heater in the base of the machine heats it. The hot water supply line does not get hot so I presume no water is being supplied. Is the water supposed to be hot at the start. If yes could this be caused be a faulty inlet valve and if so how can I check. The dishes are dirty especially on the top rack. Thanks for your help. David


Gendos is on track with his question. I have the same dishwasher and it doesn't get enough hot water to clean the dishes and runs for hours because the heating element wasn't designed to heat water, just maintain it. The only solution we have found ... Whirlpool GU2400XTP Built-in Dishwasher

Do you hook up the water line to the hot or the cold water?


... GE Dishwashers

Hook up should the G843 model be hooked up to the hot or cold water line?


You should hook it up to a hot line as it is only a 120 v unit. In Europe they are 220 v so they can heat the water more quickley than North America.\015\012\015\012Sgt 48 ... Miele 24 in. Incognito G843SCVi Built-In Dishwasher

Hook up water supply hot or cold water - LG Dishwashers


... LG Dishwashers

Does it matter if the water supply line is conected to hot or cold water?


Yes- would you wash dishes with cold water? ... Frigidaire Dishwashers

Should the bosch dishwasher be hooked up to the hot water or cold water line when making the connection?


... Bosch SHU5315UC Dishwasher

Does the dishwasher hook up to a cold or hot water line?


... Maytag Dishwashers

Dishwasher Do you hook up a dishwasher to the hot water line or the cold?


Hook it up to HOT WATER! ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Disconnected dishwasher and moved out in order to tile the kitchen floor. Ten days later reconnected dishwasher. Turned on water supply to leak check -- no water is getting into the washer. - Ran hot water from sink side to see if that would help, no such luck - Disconnected water line and water is in the line up to the connection point at dishwasher. Looked inside valve of dishwasher for obstruction - no such luck - Disconnected both ends of water line and blew in line to check for obst


... Bosch Evolution 500 SHE45M05UC Stainless Steel Dishwasher

Can i use my candy aquaviva cd 622 dishwasher if i only have a cold water supply to connect to it - even though it has pipes to connect both hot and cold water supplies?


I strongly advice against it, because the pumps are gonna assume thier is water their and is gonna try to pump the water in, and u will burn them up if their is no water their.. how ever you could get a splitter and run water to both hoses. even thou ... Candy 24 in. CD622 Free-standing Dishwasher

I also have a dishwasher (AEG Favorit), and it does not heat the water anymore. It worked fine for last 3 years, and all sudden, it only washes dishes with cold water. Could you please help to solve this problem? The hot water line is fine and I do have the hot water to the sink next to the dishwasher. Thank you in advance for your help.


... AEG 23 in. Favorit 44070IW Built-in Dishwasher

My dishwasher was moved for kitchen rennovations. When hooked back up again it would not fill up. It will run through a cycle but no water enters. If I squeeze the rubber hose that leads from the electronic valve to the tub it gets hot indicating that I am forcing hot water through the line. If I pour water into the tub it will wash the dishes but at the final 6 minute point it will go no further, I assume because it is not getting rinse water.


Hello,\015\012Make sure that a wire did not get bumped off of the soleniod valve. It sits usually on the bottom front left hand corner of the dishwasher.\015\012If the wires are both on the valve then the valve may need ot be replaced... ... Dishwashers

LG dishwasher I have just installed an LG dishwasher. When I try to run the dishwasher it sounds as if it is getting no water. I checked the water supply line twice, and nothing is blocking it. The line is attached to the hot water under the sink and is open.


I bought a stainless steel Lg less than 15 months ago for 800.00and it stopped working. The manufacture said so sorry even though you didn't take delivery until the end of Jan. your warranty goes by purchase date. I would of been better of with a may ... LG 24 in. LDF 7811 Stainless Steel Built-in Dishwasher

My kitchenaid dishwasher will not complete a washing cycle. the water heating seems to be staying on all the time. could my heating element be shot. the water seems hot when i open the dish washer during the cycle but it is connected to the hot water supply line. thanks


... KitchenAid Dishwashers

I've moved to another home and would like to re-connect my dishwasher. I am new to this & need to tap into the hot water line from the sink. HELP! How do I run the water line in an L configuration and then screw in the supply line from the dishwasher?


If you new home doesn't already have a branch line for a dishwaher, I'd get a plumber to install a copper T on the existing line then a second shut-off valve for the dishwasher. If there is ever a problem with the dishwasher, you can shut off its wa ... Kenmore 24 in. 16182 / 16189 Built-in Dishwasher

Do you hook up to cold water or hot water


Hot water. ... Kenmore 15872 Dishwasher

Bosch SHU43C 06UC works fine except: No hot water. Hot water supply to machine ok! Machine goes thru its cycles and always cold. Thermostat?


... Bosch 24 in. SHU43 Built-in Dishwasher

I have a kenmore ultra wash quietguard deluxe & notice it has been connected to the hot water supply. As I am making some changes I would prefer to connect the cold water supply will this make any difference to the operation of the dishwasher. The unit is less than 2 years old. Thank you


Depends... some units heat the water for you in which case it would not matter and would infact save you money over time. If your unit does not heat the water your going to want to leave it alone for better cleaning performance. Check your owners man ... Kenmore Dishwashers

Leaking from under dishwasher. Has run great since 1996. Under counter model in manufactured home. Chnaged to drop in pellet dishwasher detergent and it ran great. There is no water inside the dishwasher circular drain. We never use the heating coil to dry the dishes. We have turned off the water supply line under the sink to the dishwasher. Cool clear water is running out from under the bottom right corner. The hot water heater is right next to it and everything is dry and warm under it which i


Hi,Depending on the model you have this could be a couple of things. The most likely suspect is the water inlet valve. What I would recommend to do is take the bottom toe panel off, typically there are either 2 or 4 screws holding this pa ... Dishwashers

Hobart lx30h built in dishwasher when you turn it on to wash it shows p2 then it says fill but it want fill up with water also do you run cold water line to washer or hot water


The supply to the d/w should be at least 120degrees.the p2 error is a bad booster probe. always use hot water feed ... Dishwashers

Troy Bilt pressure washer 2600psi. Engines running fine with supply line, wand, and pressure line hooked up but no water or pressure is coming from pump. pressure line is limp. What is the problem?


... Troy-Bilt Pressure Washers

Asko dishwasher D5122XXL I've got the F2 light flashing. How do I reset it? Or do I have to get service people to do it? I think there's nothing wrong with the pump or drain, since I actually poured a jug of hot water in to the dishwasher. ( it's hooked up to cold water pipe)


... Asko D5122XXLS 24 in Builtin Dishwasher

Should I connect hot water or cold water line to the dishwasher?


COLD water only. ... Whirlpool DU930 Built-in Dishwasher

RE: Whirlpool dishwasher, [email protected] DU810CWDG0, Serial #FE1711925. I have an older model that was given to me & I'm trying to hook it up without a manual. Do I hook it up to HOT water or COLD?


Hot water only on dishwashers ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1446 seconds