Having problems with your Jenn-Air 24 in. JDB8910 Built-in Dishwasher ?

Door spring on dishwasher broke

\015 I have a Jenn-Air JDB8910AWW dishwasher and the door spring broke or disattached. Where can I get a new one(s) and can I put it on myself? I have a cabinet door-cover, which is heavier than the standard door. Do I need heavy-duty, (commercial), springs. It has been about six years since the dishwasher was installed by a professional.\015

Answers :

I have just done this on my own dishwasher, and managed to bend the next curl of the springs to replace the broken ends, see instructions and pictures here:-
\015\012http://www.howtofixanything.co.uk/howto-260.html
Repair Help & Product Troubleshooting for Jenn-Air 24 in. JDB8910 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

KitchenAid KUDI10FL dishwasher- The door spring system broke and I repaired it, but now all of the sudden the dishwasher will not start. The door may have been dropped a couple of time before the spring system was repaired, but it did not hit the floor, just a hard sudden stop. All of the cycle setting lights come on when they are pressed except for the start button. Just before the start button stopped working the dishwasher started by itself or started several hours after cycle selection had b


Hi- It is possible that the door latch is not completely engaging. If the door dropped the hinges may have bent a little thus preventing a good contact with door switch. Try pressing and holding the door shut, hard, and pressing start. If that wor ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

The door spring must of came loose or broke off.The door falls open if you don't hold it as you open it. Before I start dismantling the dishwasher to repair this is it inside the door or on the side of the dishwasher.


You can probably change that from the underside Dave. But you may need to pull the unit out. It should be exposed from the side ... Jenn-Air JDB6510 Built-in Dishwasher

Door spring on dishwasher broke


I have just done this on my own dishwasher, and managed to bend the next curl of the springs to replace the broken ends, see instructions and pictures here:-\015\012 ... Jenn-Air 24 in. JDB8910 Built-in Dishwasher

Kenmore Elite Dishwasher model 665.1379. Door falls open. We think the spring broke. Does this model have a door spring balance kit?


... Dishwashers

Dishwasher door When I opened the door I heard a pop and now the door drops to the fully open position. It used to stay as open as I pulled it, but now there is no tension as if a spring broke.


You're right a spring has either snapped or come off of it's anchor point. Should be 2 ...one on each side of the door. you can order parts on line at several appliance replacement part suppliers... have your make and model so you'll get the right pa ... Kenmore Dishwashers

I have a Frigidaire FDB2410LDC3 Dishwasher. It was working great until my 5 year old fell on the door and it does not spring back up now. I tried looking with a flashlight in the sides and the springs may be OK. What is most mystifying about this is something has gone wrong with the part your hand uses to close and open it. The latch is limp so I wonder if there was some other spring in there that broke in the incident. Now after some time of forcing it to shut (due to that pesky latch that


Prhandle and latch.obably sprung the hinges. The reason it dont want to work right is the door latch is not latching properly and therefore it wont start. I would start by replacing the hinges and springs and the ... Dishwashers

Dishwasher model number 363.1479580. the door will not spring back up. The spring broke and I bought a new one I can't figure out how and where to attach it pLease help


... Kenmore Dishwashers

I'm not very mechanically inclined, and the spring broke on our Haier Model ESD 302 dishwasher. Is this something that I can do myself? I'd love to if I can, without spending hours, and without ruining the dishwasher. Sears lists the part for about 5 bucks. Does the door need to be removed? Thanks in advance!


... Haier ESD302SS Stainless Steel Built-in Dishwasher

Maytag dishwasher door spring repair where do the clips and springs go they both L&R broke at once so i dont know how they are placed in the unit


... Dishwashers

My magic chef dishwasher door springs broke. I need to know how to access the bottom of the dishwasher to replace the broken parts.


Open the back door and see whether the hooking points visible.Look from the front end also to get an idea! ... Dishwashers

Dishwasher door spring broke, how to fix? - Frigidaire 24 in. PLD2850 Built-in Dishwasher


If your mechanically minded it will take about an hour or so to do max.. Each brand dishwasher can have different spring locations.. Some require the door to be stripped and taken off.. Other require access from side panels.. I took easy option and g ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

Dishwasher door spring broke? - KitchenAid Dishwashers


... KitchenAid Dishwashers

When lowering the door of the Bosch shx46l15uc dishwasher, something snapped. The door is heavier so I am guessing a spring or something broke. Is this an easy fix?


... Bosch SHX46L15UC Dishwasher

Kitchenaid dishwasher KUDK02CRBS the spring on the door broke? Is this a easy fix, where do you access the spring


Turn off the power to the dishwasher.Remove the access cover on the bottom front of the dishwasher.Lying on the floor,you can see the door hinges and replace the spring. ... KitchenAid 24 in. KUDK02CRBS Stainless Steel Built-in Dishwasher

How do we install a door balance kit on our Kenmore Elite dishwasher? Model is made by Whirlpool I understand. The plastic pieces are broken. The wheel and the spring are okay but the plastic piece on the string is broken and another plastic oval shaped piece broke as well. We plan on ordering a kit but don't know how all of the pieces go together.


... Kenmore Dishwashers

My tapan dishwasher is model 611228, serial num. 8350888 type D-U. the springs of the door broke. how do i replace them, where from do i get the parts?


Send me a check of $19.99 and i'll tell you how i fixed it. ... Tappan Dishwashers

I have a pot scrubber 640 GE permatuf dishwasher. The door spring either broke or became detached. Need diagram


... GE Dishwashers

KENMORE ELITE LIMITED EDITION DISHWASHER door spring broke


... Kenmore 24 in. 15173 Stainless Steel Built-in Dishwasher

Dishwasher problems hi my spring broke, where is the sprng located.....in the door?


Suggest a new solution....Moffat BrandModel No. MDB 11340 ... Dishwashers

The door of our Eurotech Dishwasher EDW 254 E when opened and released just suddenly "drops" down uncontrolled. Apparently the "spring" the right lower corner broke. Also, it does only poor, unacceptably thorough cleaning job now. Will you please dispatch a repair person or suggest names and addresses / tel. nos. / e-mail addresses of repair persons / shops that can fix it. If spare parts are needed please indicate the source(s) for them. Possibly send us via e-mail a copy of the manual for t


Hi.Problem is likely the door hinge springs, hinges, stoppers or other part comprised in the door hinge assembly.See parts B ... EuroTech 23 in. EDW254E Built-in Dishwasher

My Magtag MDB-9 Dishwasher the door does not slowly come down, it acts like the spring in it is broke. Could this be replaced?


I recently had a similar problem and after looking around the web I found a site called Appliance Art (http://www.applianceart.com). They have a dishwasher covers that look lik ... Maytag Dishwashers

Hello! I have a Kenmore Dishwasher Model # 665.15805890. The dishwasher came with the house and I'm guessing it is around 10 years old. My toddler was having a great time flipping the door to the soap dispenser back and forth until he pulled the door off of the pin. Now, I can't seem to position the spring in a way so that the door will spring back. I never looked closely at the hinge before, so I don't know if that is the only reason the door will not release the detergent, or if something


Hi.Please see if the diagram here can help you. Check if the spring is that indicated with nr ten in diagram. ... Kenmore Dishwashers

I have a Bosch dishwasher, model SHU9915UC/U11. The spring mechanism on the detergent door cracked, and I bought the part to replace it. I took the front cover off of the dishwasher to determine how to replace it. Two white plastic "things", maybe spacers, fell out. I need 2 things: a) how to gain access to the spring on the detergent door so that I can replace it, and b) how to put the door spacers back on. An exploded parts view would probably help a great deal. Michael J. Orr


Hello! This is Guru...Saailer...I have your information...Due to size limitations I'll need your e-mail address in order to send it to you...Send an e-mail to me and I'll send an exploded view diagram and parts list...Guru...saailer... ... Bosch SHU9915UC Dishwasher

I found the problem with my dishwasher, a spring in the handle (154556703 Frigidaire Dishwasher Door Latch) had broken. All I need is the spring, not an entire door latch assembly. Is there any way I can get the part number for the individual spring? V/r Matthew Quirk


... Dishwashers

GE GSD900L-02 Door spring cable broke


Get 2 of the same springs part # PS259673 DOOR SPRING (YELLOW) (Heavy Duty Door Spring) ... GE Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1813 seconds