Having problems with your Jenn-Air Dishwashers ?
Control locked w10418341a
Repair Help & Product Troubleshooting for Jenn-Air Dishwashers
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Control locked w10418341a
... Jenn-Air Dishwashers
I have a Maytag dishwasher MDBM601AWW. The control lock on the control pad will not unlock. I replaced the electronic control board and it worked for one wash. Control lock engaged again. I shut down the power and pressed the control lock for 3 seconds as directed by the owners manual. No luck. Please help Rich.
You have to power the unit back up and then holld the lock in for three seconds, if ths does not reset it then the console not the control bord needs to be replaced it comes with a new touch pad ... Dishwashers
I have a Kitchen aide dishwasher Model KUDI01ILWH6 that will not turn on..there is a control lock light on and I have tried pushing the cancel button but all that happens is the control lock light flashes 3 times and the dishwasher still wont turn on....Please , how to I disengage the control lock
... KitchenAid Dishwashers
The control lock light goes on as soon as I press the cycle to start the dishwasher. The dishwasher does not start, presumably because the control lock stays on. I do not know how to disable the control lock function. Pushing and holding the button for 3 seconds does not disable it.
Hello &\015\012Welcome to FixYa\015\012\015\012To unlock the\015\012controls press and hold the HEATED DRY button for 20seconds. If the problme\015\012returns then only option is touch pad replacement. Please get back t ... Maytag Dishwasher
I cannot unlock the controls on the panel - i just bought a house that has the whirlpool gold quiet partner dishwasher and when i press any button nothing happens but says controls locked - i unlock the controls and try to turn on the dishwasher and still happens and says controls locked again. can you help?
Try turning the circuit breaker off for 30 minutes. Then turn back on and see. If it keeps locking you may need new control console. Hope this helps. ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher
The contol lock LED is illuminated on the front panel of my Maytag dishwasher. (Neither my wife nor I pressed the control lock for 3 seconds!) We've tried to extinguish it by pressing it for 3 to 5 seconds, but it remains ON. We've turned off the breaker to the dishwasher overnight, but when we turn the breaker back On, the contol lock LED comes on. We simply can't unlock the control panel. We can tell that all of the other buttons work just fine because pressing any of them causes the 3 Sec LED
If by pressing the control lock button for 3 seconds does not solves the problem.then there are 3 possibilities due to which this problem may occur\015\0121)the door is not closing properly. the dishwasher door latch is either cracked internally or t ... Maytag Dishwashers
I have a Whirlpool dishwasher model #DU920PFGQ4. The controls locked light is flashing, and when I press the air dry key for 5 seconds it won't unlock, however the cancel/drain light starts flashing. When I press the cancel key the controls lock light will stop flashing, but will resume as soon as I release the cancel key. I have tried disconnecting power for 24 hours, but as soon as I plug it back up it does the same thing. Nothing else on the control panel will work.
... Whirlpool Dishwashers
I have a Fridgidaire dishwasher with a control lock feature that has now decided to lock!! There is nothing in the manual about this. The manual doesn't acknowledge this feature!! Ridiculous! Anyhow, my control lock light is on and I cannot run my dishwasher!!
On most control locks, the function is enabled/disabled by holding down the lock button for 3 to 5 seconds. Try pressing the button closest to the little lock symbol for 5 seconds. ... Dishwashers
The controls on my GE GLD4600N10WW have on occasion locked up. In the past, I have resolved this by turning the breaker off and back on. It has now locked up, but won't reset. When the breaker is turned back on, the dishwasher control panel lights indicate "Normal Wash" and "Heated Dry" but the controls do not respond. After several minutes the lights simply go dark. It does not respond to any button pushing.
Controls locked gold quiet partners model GU980SCG82 controls locked
... Whirlpool Dishwashers
Controls lock stuck in locked position how do I unlock controls?
Not sure wich buttons to press but there are probably 2 buttons that need to be held for about 5 secs to disable child lock. ... GE 24 in. Profile PDW9280JSS Built-in Dishwasher
KitchenAid kuds30ixss control lock light is always on (lock is NOT enabled)
... KitchenAid KUDS30FXSS Builtin Dishwasher
Kenmore Ultra Wash Dishwasher Model 665.15779 LOCK ON light blinking on control panel, unable to use washer. If buttons were locked, LOCK ON light should be lit continually not flashing. If you press and hold NO HEAT DRY button to disengage lock, nothing happens. If you press the CANCEL button it begins to blink in unison with the LOCK ON light. How can I stop the light from blinking to allow button function again?
... Kenmore Dishwashers
Miele Optima Series 2470 Dishwasher sounds a beeping sound and flashes a F19 error on the control panel. Last week the beeping sounded and flashed a F13 error on the control panel. I looked in the manual and it said to clean the filter, which I did and put it back in place and locked it. Now the beeps sound and it is now showing a F19 error on the control panel. Help!!
Lock Control I don't have a manual for my dishwasher. The Lock button is on (top of dishwasher). I have pushed that top button for 3 seconds. The button on the top and the "L" then both blink. The button on the top then stays on and the "L" light goes off. Since I can't get the lock light to go off - - my dishwasher won't tun on. Thank you very much.
First try unplugging the washer from powerpoint for 30secs..this may disable lock.if not, some washers will still work on lock if you hold the buttons you need. for 5seconds. eg try starting washer as normal but hold the button for 5secs....(Ps you m ... Jenn-Air 24 in. JDB1050AW Free-standing Dishwasher
Control lock light is on and dishwasher doesn't start
There is a Control Lock which locks all the control buttons, so the dishwasher cannot be started. It is enabled by pressing and holding the lock button for about 3 seconds. To disable, press and hold the lock button until the light goes out. A ... Dishwashers
My controls are locked
If you accidentally pressed "Heated Dry" for 3 seconds and it locked your controls, just press the same button for 3 seconds and it will unlock. ... GE Profile PDW8400J Built-in Dishwasher
Control lock is on
Press and hold the dry button. ... Whirlpool DU943PWK - Multiple Color Built-in Dishwasher
Control Lock light on, won't go off.
I need your correct model number to help refer to you owners manuel how to come off control lock press and hold turns it on not off ... Whirlpool 24 in. DU930PWP Built-in Dishwasher
Our Ikea Nutid Whirlpool dishwasher locked up recently. It started when someone was wiping off the top of the door where the control buttons are located. The dishwasher was locked on the china setting. Holding the cancel button, shutting off the breaker did not seem to clear it. Is there a way to reset the dishwasher? There was flashing on buttons but I cannot remember how many flashes or what one was flashing.
... Whirlpool GU2400XTP Built-in Dishwasher
Locked the control panel says its locked and won't allow any functions...how do i unlcock it
A dishwasher lock includes a first component adapted to be secured to the underside of a counter top directly above the forward upper edge of a dishwasher and a second component slidably and detachably secured to the first component. The second compo ... Kenmore 15129 Built-in Dishwasher
Locking mechanism comes on all by itself.When you hold the lock button for 4 seconds it should disengage.It does not.Should i change the electronic control or user interface
\015\012Hi,\015\012 \015\012If the dishwasher will not unlock then most likely you have a stuck or shorted keypad on the interface. If you have held the button to toggle control lock off ... Kenmore Dishwashers
Our Kitchenaid dishwasher model # KUDP021R will not start. We close door, select wash and press start. The control lock light at the top which is lit flashes a few times and then stays lit. Dishwasher remains silent. An aside which may be helpful is that the door has always seemed to be not quite straight...as though it had to warp a tiny bit to close and lock.
The problem you have already identified could be the door switch is not closing when you shut the door. Please confirm your dishwasher is KUDP02I (i and not 1).\015\012\015\012One way to check is find out the door switch on the door panel ... KitchenAid Dishwashers
I recently replaced the control on a Jenn air JDB8910AWS Dishwasher. It only washes in the normal cyle. It's as if all other cycles are locked out? Is this possible and if so what code do I use to unlock the control?
Hi\015\012\015\012\015\012Thanks for using FixYa. From what you have described it seems to be a issue with the control panel that has gone bad and needs to be replaced. You can buy a ... Jenn-Air 24 in. JDB8910 Built-in Dishwasher
Frigidaire fghd2433 control interface problem: Only selection possible is "Heavy wash" all other buttons on control interface are dead with the exception of start. Child lock not the problem here. This was installed 2 days ago.
... Frigidaire 24 in. PLD2850 Built-in Dishwasher