Having problems with your Jenn-Air Maytag Range Oven Burner Knob Part Y704918 ?

Knob on jenn aire under counter oven fell off. I lined it up and put it back on but it spins 1/8 of the way before it works. It doesn't look broken.

\015 The flat parts line up but then it spins.\015

Answers :

THere is a pin in the middle of the PLASTIC knob that probably broke off. It is not your fault, just cheap construction. Order the part, you have the code!!
Repair Help & Product Troubleshooting for Jenn-Air Maytag Range Oven Burner Knob Part Y704918

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Knob on jenn aire under counter oven fell off. I lined it up and put it back on but it spins 1/8 of the way before it works. It doesn't look broken.


THere is a pin in the middle of the PLASTIC knob that probably broke off. It is not your fault, just cheap construction. Order the part, you have the code!! ... Jenn-Air Maytag Range Oven Burner Knob Part Y704918

I have a Fisher and Paykel drawer dishwasher and I'm wondering if there's a way to put a panel on it to make it look like and integrated dishwasher. It would need some way of the panel moving to start the dishwasher because the controls are located on the front. I plan on putting it in an Ikea Akurum that is 24" deep. The dishwasher is 22-9/10 deep, so that looks like it would leave some space for the dishwasher to sit back in the cabinet so the door panel could be flush with the cabinet. I'm no


Hmmmm...the first thing that comes to mind is to check out ApplianceArt.com. they have alot of panel options. I'm not sure if they have the integrated ones you are looking for but they have cheap options for everything else. ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

I have Bosch SHU9915UC/U12. A spayer arm has fallen off. It is not the one on the bottm, it must have come off the top or the back of the. I can not figure out where it goes. It does not look like anything is broken. When I try to put it back on the top or the back it does not seem to fit.


Hello, welcome to fixya.\015\012\015\012The piece your speaking of I suspect is the spray arm from the upper rack. \015\012\015\012The image I scanned and attached just below here will hopefully help ... Bosch SHU9915UC Dishwasher

I have a Kenmore Ultra Dishwasher. Model # 665 or 655. 15895791. A peice fell off the upper middle area. Its round and has 2 concave areas on it. It looks loke it might spin and distribute water. Ive tried to put it back on, but there must be a part missing. Ihave looked and looked online for this part but have not found it. Also I am even having a hard time with the model #. Ive checked it several times to see if I read it wrong. Thanks in advace.


... Kenmore Dishwashers

I have a maytag MDB600AWW dishwasher. the top spray arm doesn't turn. it wouldn't even turn if i removed the to middle trays. I took the accumulator out and cleaned it. the fine mesh filters were clogged. unfortunately, birthday candles found their way into the machine sometime back. i cleared as much as i could. when i put it back together, the top arm would spin only when i had the 2 middle arms disconnected. It seemed there was an increase in pressure. i ran a diagnostics test and there were


First check to see if the washarm itself is clogged, if so clean it out.\015\012\015\012If the arm has a bearing it may be shot.\015\012\015\012You may have a clogged manifold on the output side of the pump. I sometimes run a ... Dishwashers

I do have a White LG Dishwasher about 2 years old and the Upper Spray came lose and laid in the dishwasher.I tried to put it back by pushing it back on the Rubber seals but it wont sit,Looks like it needs something to hold or connects from the top when it should spin .HELP


... LG 24" XL Tall Tub Built-In Dishwasher - White

Whirlpool mod # GU2400XTPS6 Loud during wash cycle. I've cleaned under lower spray arm...took it apart, all the way to grinder blade and screen. Cleaned out toothpicks, broken glass, shop-vac'd the area. Noise seems the same when I put it back together.


Hi\015\012\015\012If you have opened all the way to the impeller and cleaned\015\012the drain pump assembly completely then the issue is with the pump that is bad\015\012and should be replaced. You can also check this video for replacing/ ... Whirlpool GU2400XTP Built-in Dishwasher

My Kenmore 15632 is not cleaning well at all. The spinning "arm" thing broke off & I can't find my manual to see if there is a way to put the arm back on?


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Kenmore 15632 Built-in Dishwasher

I recently found the upper spray arm in the bottom of the dishwasher after running it. I can't see any piece broken off of it but I also can't see any way to put it back on. I suspect some small piece broke off in a very clean break and I just can't see it. Is this fairly easy to purchase and reattach myself? I can see the holder for it screws in and out easily.


Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... Frigidaire FGHD2433K 24 in Builtin Dishwasher

Hi, i have a lg dishwasher and the middle spray arm fell off. i doesnt look like anything broke off. how do i put it back on because it does'nt clip on.


... LG Dishwashers

Water is running in and draining right back out. Leaving the dishes completely dry and dirty. I found a part laying on the floor when I took the cover off. I put it back where it came off of and now this problem. Yesterday it was the water not draining at all, now after putting that part back on it drains and doesnt wash.


Was it the float? try this empty machine put 1cup of vinegar or CLR and let it run through machine and clean jets and spray arm as well as soap dispenecer,You may want to try cascade they have rechanged it .Try this and let me know thanks ... Crosley 24 in. CDU600 Built-in Dishwasher

It sounded like something was jammed in the bottom of dishwasher. Took it apart, not sure if put it back together correctly because now it is not turning (bottom). Is there a diagram to look at on how to put back together correctly? Whirlpool Quiet Partner II Serial # FP1386450 Model # DU943PWKQO


Go to sears part sales web site adn look at parts breakdown. ... Dishwashers

The pressure tower came off. I don't know where it came from, nor how to put it back on! It's so tall, it looks like the racks won't close once it's in somewhere. I have no idea how to put it back inside the dishwasher.


With a model # it's hard to give good help but when they ware out the can blow the tower . . you can replace the tower assem ( if ge it will come with lower wash arm other brand it will not .. mm hope this ... Dishwashers

My 14 yr old Magic Chef Model DU4K seems to be leaking (it is dripping into the basement just under where the dishwasher is located). it started when the arm at the bottom of the dishwasher did not seem to be moving so my husband took off the bottom "grill" to see if maybe there was something under there preventing it from spinning. It started to leak when he put it all back together (the bottom arm is still not spinning)


Being 14 years old I dought if spares are still available for this machine personally at 14 I would rather replace the unit if you are not in a possition to replace it you could advise from your local appliance repairs as to weather parts are availab ... Dishwashers

My dishwasher made some really grindy, crunchy sounds the last time it worked. I unscrewed the float and checked for debris in it, nothing there. When I got that off, there was a circular black fan-type thing under it(the motor??), that spins around and seems to be held in place with only one screw. I tried to access underneath that, and it doesn't want to do anything but spin around. How do I remove that to check underneath?? I don't want to break it. I put it all back together and tried run


One of the most common question that I get on a dishwasher repair is "how does that motor and pump impellor screw come out?"Inside many dishwasher pump assemblies is a screw that goes through the upper impellor and screws direct ... Whirlpool 24 in. DU930PWP Built-in Dishwasher

Removed housing from pump to retreive broken piece of glas found 2 white plastic balls laying on bottom have to put back together where do i put the plastic balls


Hi\015\012\015\012Please check this video for installing plastic balls:\015\012\015\012 ... Kenmore Dishwashers

My 2-year-old LG Dishwasher doesn't clean the dishes well any more. It used to work great, I was very happy with it. For some unknown reason it doesn't work that way any more. The dishes come out dirtier then they were before I put them in. I had three guys come in and look at it and they all said that there is nothing wrong with my dishwasher. My water heater is 1 year old, works great everywhere else in the house, the dishwasher is hooked up the right way, by a professional, I don't have hard


The heater does not heat the water it keeps it hot check there first id say the heater or thermal is bad if both check good replace control ... LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher

Hello! I have a Kenmore Dishwasher Model # 665.15805890. The dishwasher came with the house and I'm guessing it is around 10 years old. My toddler was having a great time flipping the door to the soap dispenser back and forth until he pulled the door off of the pin. Now, I can't seem to position the spring in a way so that the door will spring back. I never looked closely at the hinge before, so I don't know if that is the only reason the door will not release the detergent, or if something


Hi.Please see if the diagram here can help you. Check if the spring is that indicated with nr ten in diagram. ... Kenmore Dishwashers

My power button cover broke on the dishwasher and I figured out the part number I needed, but when I put it back together I got the wires crossed on the board and door switch. Now the control lights up , but the dishwasher will not run a cycle. THe question is does the plug on the door switch have to be a certain way, because there are three wires and you can connect the plug both ways. I did turn the plug, but it still does not run. Did I break the switch? Bosch SHU9956uc/14


The wires do have to be a certain way on the door. Otherwise a door open can tell the board that's it shut and vice versa. The easiest way to do it, is test the switch with an ohmmeter, place the meter on the switch, push button in and see if the rea ... Bosch SHU9956 Built-in Dishwasher

Broken fitting The plastic curved piece that attaches the hose to the white fitting on the back of the dishwasher broke, and I need a replacement.  I have been to Home Depot and they don't have anything to fit it, and I was told to go back to the manufacturer for a replacement piece but have looked online and can't find anything that would allow me to order the part.  Help!??


You don't have to change that piece,just tie the hose (drain hose ) to something that is equal height,this prevents siphoning. Please Rate This ! ... Danby 22 in. DDW396 Free-standing Dishwasher

The Bosch plastic push button (AP2804452) has broken on my SHU9950 dishwasher. The switch itself is still good. I have removed the broken pieces of the bad button from the unit and am now depressing the switch without the button. When I get the new push button, what is the proper way to remove the control panel cover to put the new button in place? Thanks!


... Dishwashers

I have LG dishwasher for 2 years now. Working perfectly until one day one glass gets broken during washing cycle. Immideatly we get EO error. We check possible reason of error in the manual then decided to try to fix ourself. We open bottom cover and drain outcoming part. Immideatly we discover a piece of glass that was preventing a small plastic piece to rotate. We remove that piece of glass. Put back covers and machine. We connected it back to outlets and run it. All was working again !!! This


In order to fix problem we disconnected dishwasher, put it on one of side, opened bottom cover - the one that is outside of dishwasher. We find out the part that is\015\012connected to the drain horse. We take of 3 screw and open that part too ... LG Dishwashers

Kenmore Dishwaher 58715142400 leaking from round looking pump on bottom. It was not draining so i unclogged the hose and put it back on. now it is leaking from a pump or something where it doesn't look like water should be at all


May be blocage in the exit pump ... Kenmore Dishwashers

Top "spinner" has some water flow but doesnt spin. Doesnt seem to be enough pressure to get it moving, would the pump be on the way out , i have checked all holes for blockage and also ran some cleaner through machine.


Hi,That problem can have many and varied solutions...I have tried to put together in this tip the most common and easiest to checkout problems. For many of the spray arm problems the ... Asko D1776 Stainless Steel Built-in Dishwasher

A part fell into my top tray,gray,plastic,9 inches long w/ a 2 inch diameter circle in the center,looks like its an arm,spinning somewhere?....did it fall from the inside "top",side,bottom??? Don,t know where to attach back?What is it,where does it go,can it just snap back ???? Thanks for any help...MODEL FGHD 2433 KFO...Serial # [email protected]


Here is the exploded diagrams of your entire machine.\012Locate the patr and you should be able to figure out where it goes\012\012 ... Frigidaire FGHD2433KF Builtin Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1173 seconds