Having problems with your Karcher 1750 psi Electric Pressure Washer ?

Leak spray wand karcher k2.89 - Karcher 1750 psi Electric Pressure Washer


Answers :

Repair Help & Product Troubleshooting for Karcher 1750 psi Electric Pressure Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Leak spray wand karcher k2.89 - Karcher 1750 psi Electric Pressure Washer


... Karcher 1750 psi Electric Pressure Washer

I have a Karcher K3.48M electric pressure washer which used to shut off when you weren't using the cleaning wand. This no longer happens and there is alot of water running out of the bottom of the unit. (This didn't used ot be the case) I expect a leak somewhere inside the unit, but I'm wondering even more if there is a pressure switch which has failed that cased the leak. In other words, if I find and repair the leak and there is a failed pressure switch, it will likely only break again. I can'


Hi you will have a 8 digit number on a silver plate on the machine with a number like 1.141-470.0\015\012Then go to www.karcher.com then on the left click on Europe, then you ... Karcher PSI Electric Pressure Washer

I was using the pressure washer and it stopped having high pressure and motor keeps doing a varoom--- pause----varoom----pause and does not stop doing this even with the wand off. Does anyone know what to do? it is a karcher 1750 psi electric washer


This problem, where the unit continually switches on and off when the handgun is closed, is quite common. Unfortunately it has at least six different possible causes, only two of which are easily checked. \015\012\015\012The first thing yo ... Karcher PSI Electric Pressure Washer

Water leaking from body of K4 .130 washer - Karcher PSI Electric Pressure Washer


... Karcher PSI Electric Pressure Washer

I have a Karcher 330 electric power washer. When connected and set to highest pressure (on variable wand) I get no motor action unless I reduce wand setting, then I get a little boost but not much. If I use high pressure conical wand I get high pressure sometimes, other times motor does not go and no pressure is delivered. I have replaced the high pressure hose.


Just wondering. have you tried it without an attachment to see what kind of pressure you get ... Karcher K2.26 Electric Power Washer

Karcher pressure washer wand won't spin - Karcher 1750 Psi Elec Pressure Washer


... Karcher 1750 Psi Elec Pressure Washer

Craftsman 1700 PSI, 1.3 GPM Electric Pressure Washer Spray gun has no pressure


... Craftsman 1700 PSI, 1.3 GPM Electric Pressure Washer 50 States

Karcher K 3.68M Electric Pressure Washer. Wand trigger Locks Up.


Sounds like the pressure valve is broken thats why you cant depress the trigger , the valve is on the pump , i would suggest taking it to a repair shop as they are fiddly things to fix ... Karcher PSI Electric Pressure Washer

My kranzle washer pressure is leaking - Electric Kranzle Professional 1600 PSI Pressure Washer


... Electric Kranzle Professional 1600 PSI Pressure Washer

Karcher max 2700 psi 6.6 gpm 140F spray gun - Oregon 37-068 Pressure Washer Spray Gun With 12-Inch Lance Medium Duty 2,700 Max PSI 6.6 GPM 140-Degree F Max 1/4-Inch Male Inle


... Oregon 37-068 Pressure Washer Spray Gun With 12-Inch Lance Medium Duty 2,700 Max PSI 6.6 GPM 140-Degree F Max 1/4-Inch Male Inle

I have the Karcher 2400 psi, 5.0 Honda engine. Starts fine, but when you pull the handle on the spray wand, the pump does not kick in and the water just continues to trickle out of the end of the wand at regular faucet pressure. Occasionally the "clutch" will kick in and you have full pressure, but if it does and I let off of the trigger then chances are that it won't kick in again. has been getting worse for several years.


... Karcher 2500 PSI Pressure Washer

Karcher 2.9 pressure washer leaking - Karcher K2.26 Electric Power Washer


... Karcher K2.26 Electric Power Washer

Briggs and Stratton pressure washer will not start. I have a 6.75 hp pressure washer that is only a year old. when I pull cord it turns over but does not start. I changed plug and checked it, I have spark when pulling. I have 40-50 psi of compression when pulling also. gas was drained and is brand new. it was working fine last time it was used. I have tried starting it without the water line or spray wand hooked up and no difference. After about 10 or 15 pulls, can smell gas when I am trying to


Hello dave, the problem is compression to low,you need 60 to 130 lbs to run engine,check for blown head gasket,or bad rings,or a stuck open valve,hope this helps,, ... Briggs & Stratton Pressure Washers

Karcher 1600 psi manual - Karcher K238CCK 1600 PSI 13 GPM Electric Pressure Washer with Car Care Ki


... Karcher K238CCK 1600 PSI 13 GPM Electric Pressure Washer with Car Care Ki

Assembly plans for karcher 2400 psi pressure i recently had a problem, with my pressure washer. i was cleaning out my hose and took the hose assembly and brass fitting off. run water threw it thought i had cleand it out, put it back together and now when i hooked my water hose back up the water comes out of the despencer instead of the pressure wand. does eny one no what i need to do to revurse this?


... Honda Karcher G2400HH-R Pressure Washer

We have a Karcher G2500VH pressure washer. If you start the engine with the trigger pulled on the spray wand it will run at full pressure until you release the trigger. after that, when you pull the trigger it will not have any more pressure than the water hose feeding it. Does it have an internal unloader valve? What is the part number?


Hi, Karcher calls the unloader valve a spill valve, this is a link to a full drawing/parts listing , and your fault description might well be a sticking /seized unloader(spill ) valve hope this helps ... Karcher 2500 PSI Pressure Washer

Turn water on then actuate wand trigger. Pressure washer leaks when wand trigger is actuated and has very low pressure/flow output. After releasing trigger the pressure cycles on - off at approx 1 second interval. I suspect that the plasstic oulet tube is leaking causing low pressure leak out of bottom when trigger is actuated and causes pressure switch to cycle when the trigger is released. Any Help? This pressure washer is approx 18 months old!


You gave a very close solution yourself for the problem. But other leakages can cause such symtoms.Forexample a leaking head or a leaking chemical inlet. These can be caused because the spill valve (pressure control valve) is stuck. When this valve s ... Karcher PSI Electric Pressure Washer

Task Force Electric Pressure Washer 2000 PSI will not spray cleaner from tanks


... Task Force 2000 PSI Electric Pressure Washer NEW 6127

My Snap-On 2000 PSI Electric Pressure Washer is not working. When I hook up the water hose and plug the power cord on and turn the machine on, all I get is a leak under the machine. Is there a shop


... Pressure Washers

HPGW1500 Karcher pressure washer. I was using it yesterday and all of a sudden water started spraying out of the lead that connects to the electricity! Up until then the unit was working perfect;y. An


... Karcher Pressure Washers

Pump want start no pressure on spray - Karcher 2500 PSI Pressure Washer


You need a bladder and seal rebuild kit , buy from your local small engine guy and you can do yourself or have him do it ... Karcher 2500 PSI Pressure Washer

Pressure pulses on/off - Karcher 1850 PSI Electric Pressure Washer Winduction


... Karcher 1850 PSI Electric Pressure Washer Winduction

My Snap-On 2000 PSI pressure washer is leaking through the trigger handle. I have no pressure coming out of the wand but the motor runs.


The fitting for the trigger is cracked. It happened to mine because I did not make sure the wand and hose was drained before winter came. The water left in the wand expanded and cracked the trigger housing. The problem is that the trigger piece is ... Pressure Washers

The washer hunts when trigger released - Karcher 1750 psi Electric Pressure Washer


Hi, if you have the smallest of leaks on the outlet side of the machine then the machine will hunt.\015\012if not that, then you have a non return in the outlet of the machine,the non return has got a little o.ring which is most probably worn. ... Karcher 1750 psi Electric Pressure Washer

Karcher 3.99 i pulsating - Karcher PSI Electric Pressure Washer


... Karcher PSI Electric Pressure Washer
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1392 seconds