Having problems with your Karcher 2500 PSI Pressure Washer ?

Troy bilt pressure washer will not build or reach high pressure

\015 Troy bilt model 020207 \015\012rev no - 01\015\012serial - 1010326762\015\012psi - 2450\015\012gpm - 2.0\015\012\015\012pressure washer motor runs fine - but will not build high pressure\015

Answers :

Check the non-return valves in the pump block. if these are damaged or dirty you pressure will be greatly reduced. they are located behind the 3 lage brass hexagonal caps.
\015\012
\015\012I hope this helps
Repair Help & Product Troubleshooting for Karcher 2500 PSI Pressure Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Troy bilt pressure washer will not build or reach high pressure


Check the non-return valves in the pump block. if these are damaged or dirty you pressure will be greatly reduced. they are located behind the 3 lage brass hexagonal caps.\015\012\015\012I hope this helps ... Karcher 2500 PSI Pressure Washer

How do I fix a pressure washer that will not build up pressure quickly and when it does reach high pressure, the pressure quickly drops to a lower pressure (more typical of the pressure found in a garden hose)


It can be the inlet filter where your garden hose connects is clogged, so check that first. Also make sure that the hose is connected tightly and not pulling in air both at the inlet and outlet. Remove the spay nozzle and use a pin to make sure it is ... Karcher G3025OH Pressure Washer

2550psi Troy bilt with Briggs engine. Pressure washer runs ok and builds pressure. But, when the nozzle lever is depressed the pressure is strong and then drops to a much lower pressure and a fine spray.


... Briggs & Stratton Briggs Stratton 2550 Psigaspressure Washer

Troy Bilt pressure washer model 020209 will not build pressure-have checked all screens and intake in pressure hose and garden hose from house to pump. water leaks at gun handle- took it apart and oiled piston- was ''grabby'' but now snappy but still leaks. Engine starts fine and runs fine. Please help.


A leaking gun will kill all the pressure. You may need to repair or replace the gun ... Briggs & Stratton Pressure Washers

Not building pressure in a troy-bilt pressure washer 2600psi


... Honda Pressure Washers

Troy-Bilt pressure washer does not provide pressure


... Briggs & Stratton Pressure Washers

Troy bilt pressure washer deadheaded - Troy-Bilt 020528 Gas Pressure Washer


... Troy-Bilt 020528 Gas Pressure Washer

Troy-Bilt 2550 20293 pressure washer not producing pressure. Worked when last used 2 months ago. Pump pistons are moving up and down when engine is pulled through. Inlet water is flowing through pump but no pressure when engine is started. I have the same problem. Water flows thru the pump when not running, but no flow or goes in by-pass mode when I start the pump. The pump being Troy Bilt Model 020296-01. I replaced unloader valve even. Anything else I can do?


You replaced the unloaded valve. Are you positive you have the unloader screwed to pressure and not turned the opposite way? You will have no pressure if it is adjusted wrong. One other thing I have encountered is that the unloader has a ball bearing ... Pressure Washers

My Karcher K3.48M pressure washer remains in the low pressure mode even when I return the pressure nozzle to the high pressure position. How can this be corrected. The pump seems to build up the pressure because when I release the handle the pump motor stops. This is a fairly new pump which was purchased in the latter part of last year(2010). Could this have been caused by the detergent I have been using which is an automotive shampoo? Please help I love this washer and for the times that I u


... Karcher PSI Electric Pressure Washer

Troy bilt pressure washer 020240 - Briggs & Stratton Pressure Washer Projectpro Spray Nozzle


... Briggs & Stratton Pressure Washer Projectpro Spray Nozzle

Troy-bilt gas Pressure Washers won't start - Pressure Washers


... Pressure Washers

2800 PSI Troy-Bilt XP pressure washer manual - Briggs & Stratton Prosumer 20324 Gas Pressure Washer


... Briggs & Stratton Prosumer 20324 Gas Pressure Washer

Troy bilt pull cord pressure washer recoil - Pressure Washers


... Pressure Washers

Troy-bilt pressure washer 020296 won't start - Karcher 2500 PSI Pressure Washer


... Karcher 2500 PSI Pressure Washer

Troy Built pressure washer starts up fine and idles nice. Start spraying and everything is fine for about 30sec to 1min then the engine just shuts off. Seems like pressure is building up and choking the engine out. If I dont spray it will idle all day long. I have cleaned the unloader area, still shuts off. I have the pump off the machine, what should I do? Model number 020208 Troy Built. Rev # 01


... Pressure Washers

On off switch for troy bilt pressure washer - Briggs & Stratton Prosumer 20324 Gas Pressure Washer


... Briggs & Stratton Prosumer 20324 Gas Pressure Washer

Oil plug on troy bilt 020240 pressure washer - Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer


... Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer

Troy bilt 2500 pressure washer - Pressure Washers


... Pressure Washers

2500 PSI 2.3 GPM Gas Pressure Washer - Troy-Bilt Pressure Washers


... Troy-Bilt Pressure Washers

My troy bilt pressure washer won't start - Pressure Washers


... Pressure Washers

Briggs and Stratton Troy Bilt gas pressure washer one year old. I can get water thru pressure washer and bleed the air, water comes out the hose just fine until I start the pump. Then, I lose all water flow. Pump runs fine but when it's running, no water goes through.


... Briggs & Stratton Prosumer 20324 Gas Pressure Washer

Troy bilt pressure washer 02033 gas tank - Honda Pressure Washers


... Honda Pressure Washers

Troy-bilt 020344 pressure washer - Pressure Washers


... Pressure Washers

Pull cord stuck Troy bilt 3000 - Troy-Bilt XP 3000 PSI 2.7 GPM Gas Pressure Washer 020489


... Troy-Bilt XP 3000 PSI 2.7 GPM Gas Pressure Washer 020489

Troy-bilt 2200 psi pressure washer


I have a Troybilt Model 2200 PSI Pressure Washer in which I have used only 2 times in the past 2 1/2 years. Went to use it this past weekend and the pump in not working. Water shoots out of the side. I bought this brand and model as I thought Troyb ... Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1073 seconds