Having problems with your Karcher 2500 PSI Pressure Washer ?

Karcher G3050OH Pressure Washer Spill / Unloader Valve (Bypass)

\015 Karcher G3050OH Pressure Washer horizontal mount 3000psi the Spill / Unloader Valve (Bypass) which is a 3 piece assembly with a male, a female and a spring betwwen keeps backing off from eachother releasing the spring and shutting the pressure down. I have put it back together several times what gives is this normal or have I failed to adjust it correctly?\015

Answers :

You should put 'locktite' on the male thread and screw it in all the way and lock it there. That is how it works ,the spring keeps the valve at the bottom closed during high pressure operation. When the gun is released the part with the o-ring is forced down resulting in the valve opening and then the pressure is by-passed.Those dont normally give trouble. Look for a blocked nozzle or a restriction somewhere in your high pressure hose.
Repair Help & Product Troubleshooting for Karcher 2500 PSI Pressure Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Karcher G3050OH Pressure Washer Spill / Unloader Valve (Bypass)


You should put 'locktite' on the male thread and screw it in all the way and lock it there. That is how it works ,the spring keeps the valve at the bottom closed during high pressure operation. When the gun is released the part with the o-ring is for ... Karcher 2500 PSI Pressure Washer

Clean and unloader valve on Karcher hd3500 pressure washer -intermittent pressure on and off. Cleaned inlet screen. Think unloader valve is is under pressure knob? Will cleaning help?


Hi:Cleaning it is not enough. You need to make sure the o-rings are in good shape and grease it with a very very good waterproof grease. ... Karcher Pressure Washers

Leaky spill valve on karcher pressure washer - Karcher G2650HHR Gas Pressure Washer


You should replace the thermal by-pass valve with a new kit, part number is 45803590 ... Karcher G2650HHR Gas Pressure Washer

My Karcher 4000 SHR Pressure Washer pressure pulses when operating. I have checked with Karcher Technical Support and all their trouble shooting procedures except checking the unloading valve. Where is this valve, how do I get to it and how do I lubricate it?


It sounds like your unloading valve is crudded up with mineral deposits and stuck in a partway open state. look for a plastic cover with a silver snap on top; pry off the silver snap and lift off the plastic cover; next remove the two screws on the ... Honda Karcher G4000RH Pressure Washer

Karcher pressure washer unloader valve sticking? I have the pump shown on page 3 of Karcher manual number 91392030. I removed the unloader valve, but am not sure if I have the entire assembly. I got the top seal and a spring. The bottom seal may be jammed in the pump.


... Karcher G3025OH Pressure Washer

Deville Excel Model # EXHA2425 Pressure washer. Is "unloader" the same as "bypass valve"? I have a deville excel Model # EXHA2425 pressure washer with a 5.0 Honda enginr. I went to the deville website (devap.com) which forwarded me to the dewalt site w/ exploded diagram below. I am having problems with intermittent pressure production. If I squeeze the trigger sometimes it will have pressure, somethings it will not. If I repeatedly squeeze, then release the trigger sooner or later I will get p


... Pressure Washers

How do you locate/clean an unloader valve on a Karcher HD3000 pressure washer


... Karcher G3025OH Pressure Washer

Karcher 620m pressure bypass valve sticking - Karcher 2500 PSI Pressure Washer


... Karcher 2500 PSI Pressure Washer

Unloader Valve - Karcher Pressure Washer


Where is the unloader valve locaed on a Briggs Stratton pressure washer? ... Honda Karcher G4000RH Pressure Washer

Poor pressure karcher g 2500 pressure washer with a 5.5 honda engine. No high pressure, hose pulsates as does water out of the outlet. have removed the unloader valve twice and cleaned it to no avail


I had this same problem on my pressure washer.the pump had some broken parts in it .i found my replacement pump on EBay. ... Karcher 2500 PSI Pressure Washer

We have a Karcher G2500VH pressure washer. If you start the engine with the trigger pulled on the spray wand it will run at full pressure until you release the trigger. after that, when you pull the trigger it will not have any more pressure than the water hose feeding it. Does it have an internal unloader valve? What is the part number?


Hi, Karcher calls the unloader valve a spill valve, this is a link to a full drawing/parts listing , and your fault description might well be a sticking /seized unloader(spill ) valve hope this helps ... Karcher 2500 PSI Pressure Washer

I need to check the unloader valve on my Karcher 3000psi pressure washer. I was directed to your site for help. I just need to know what to unbolt to get to the valve.


... Pressure Washers

Have a Karcher 3000G pressure washer, low pressure. How do you remove the unloader valve?


Ask the professor. He knows everything about everything. I'm working on my degree now. Go to Youtube like he does. LOL ... Karcher 2500 PSI Pressure Washer

Karcher K3.91, lost some pressure and pulsing when trigger is release. stripped it down and checked all six valves and there all sealing as they should. i took apart the unloader valve cleaned and inspected and thats fine. there is NO water leeks anywhere or oil. preasure washer is 2 years old and gets used once a week for ten minutes. i really dont understand why its playing up


... Pressure Washers

Karcher washer gas no pressure modele g2600vh part no 11944040 high change the spill valve no pressure


... Pressure Washers

I have a Karcher HD 3101 pressure washer. The out pressure is not working. Is there a unloader valve that needs to be cleaned?


Yes, the unloader needs to be lubed. Send me a email at [email protected] with a discription of what you just listed and I will send you a pdf file on how to repair it. ... Karcher G3025OH Pressure Washer

Where is spill valve on karcher K2.27 pressure washer?


... Karcher K238CCK 1600 PSI 13 GPM Electric Pressure Washer with Car Care Ki

Intermittent pressure from pressure washer (bypass valve sticking


That diagram is for a DEWALT by Black and Decker. Not Karcher.What is your model #?Thanks! ... Karcher 2500 PSI Pressure Washer

Northstar Hot Water Pressure Washer (model #157322) While using the pressure washer the safety relief valve activated venting steam and hot water from it... I immediately shut it down and let it cool down. After it was cool, I turned on the water supply again and the relief valve was still spewing water from it. My neighbor said it was probably the "unloader" valve was stuck or damaged. I called around my area and it seems as though no one services my pressure washer.. Is there a manu


... Pressure Washers

How do i remove the unloader valve on a karcher 4000 PRESSURE WASHER


... Karcher Pressure Washers

HOW TO REPLACE SPILL VALVE ON A T 300 KARCHER PRESSURE WASHER


... Pressure Washers

Need help getting to an cleaning stuck unloader valve on a Karcher G 2400 HH Pressure washer. Thanks


The cart body makes this process a little confining but it can be carried out without removing the pump from the motor.\015\012\015\012Diagram courtesy of: ... Honda Karcher G2400HH-R Pressure Washer

Where is the unloader valve on G 4000 RH - Honda Karcher G4000RH Pressure Washer


... Honda Karcher G4000RH Pressure Washer

How do I remove the spill valve on a k2400HH - Karcher 2500 PSI Pressure Washer


... Karcher 2500 PSI Pressure Washer

Deville Excel Model # EXHA2425 Pressure washer I have a deville excel Model # EXHA2425 pressure washer. I went to the deville website (devap.com) which forwarded me to the dewalt site w/ exploded diagram below. I am having problems with intermittent pressure production. If I squeeze the trigger sometimes it will have pressure, somethings it will not. If I repeatedly squeeze, then release the trigger sooner or later I will get pressure. Someone on hear had told me it was a "bypass valve sticki


You\015\012need toput antifreeze in the out/outlet or/oil then start it up you are driing out the seals allways put away with repeating this step ... Karcher 2500 PSI Pressure Washer
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0728 seconds