Having problems with your Karcher 2500 PSI Pressure Washer ?

Pressure washer manifold kit has male adapter that is strip where hose screws on. How can that be fixed


Answers :

Repair Help & Product Troubleshooting for Karcher 2500 PSI Pressure Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Pressure washer manifold kit has male adapter that is strip where hose screws on. How can that be fixed


... Karcher 2500 PSI Pressure Washer

Coleman power washer PW0912201. Water is blowing out of the chemical pickup tube when water hose is turned on prior to starting. After starting the water realy blows out from there. Would the unloader be faulty? I tried to pull out the unloader stem assembly from the manifold but it appears to be pressed in. Do I need a new manifold kit? or am I looking at the wrong part to correct this?


... Coleman Pressure Washers

I have a SJV 2.5 G27-1 3400 RPM -- ref part: 1982520 Hose Tail The Soap Injector barb got it's threads stripped after I took it off to clean it out, and replaced it (apparently, carelessly). Is this just a standard part I can pick up at a local DIY store? Or is it somehow special? What is the male threads size/type? I checked the corresponding female threads, they look a little scuffed, but I hope they are OK, else I am probably screwed, sigh.


... Annovi Reverberi Pressure Washers

Connector hose we tried to adapt the dishwasher hose so that instead of hooking it up to faucet, it connects to the the undersink water pipe, using tubing and clamps and a shut off valve. we can't get it to stop leaking where the clamp is. Are there adapter kits avail to do this? This way we wouldnt have to keep taking the hose on and off from the faucet.


The water pressure is too high in the intake for your kit. use a higher grade kit or reduce the pressure . ... Danby DDW1805W Designer Series Free-Standing Dishwasher

I own a build-in LG Stainless Dishwasher (modle: LDF1178ST). It stopped draining water during its recent startup due to its idle (no operation) for about a year:). I can only feel the hose full of water by touching the drain hose between the washer and the sink desposal. It's hard to check other part of dish washer since it's built in our cabinet. Could any dishwasher expert help to advise how to trouble shoot or fix this problem. Thanks, Alex Chen 571-220-7484


There is a float in the bottom of the dishwasher that tell the motor to turn on and pump out the water. I would check the float first to see if it is hung up and not raising to tell the dishwasher that there is water in the base. Check the check valv ... LG Dishwashers

I have a leak from the pressure washer output manifold and sears model 580752050. (pump model mtpv93517) The check valve kit Briggs and Stratton # 193806gs I ordered was correct from but the check valves are too tall to seat into the output manifold and be flush when reinstalling. Did I order the wrong check valve kit or is there another problem?


... Pressure Washers

Drain Clogged I have a Kenmore Quiet Guard Plus dish washer. The water will not drain from the unti. I believe the drian in the dish washer is pluged. I removed the 8 screws from the pump/strainer unit at the bottom of the unit I removed the top that the screws were holding donw, but can't figre out how to get to the drain to unplug it. The center metal unit is exposed and nut head is exposed. What do I do next to get to the drain hose to unplug it?


You might try pouring liquid plummer in the drain part and jet it set it shouold eat through whatever is in there ... Dishwashers

My dishwasher's top rotating sprayer keeps coming loose. The screw and plastic bearing fall out and I think that it has stripped out the end where it seats into the top of the washer. Any ideas on how to anchor this in? Adhesive? A larger screw? The plastic bearing is Part No. 568 and the screw is Part No. 569. If I replace the conduit arm (Part No. 585), will that give it a new, clean spot to screw in too? How difficult is it to replace this arm?


\012Hi,\012That is not that hard to fix and you can easily buy the parts yourself online...Here is a tip that will help you with the online buying...How to Buy ... Dishwashers

Had the Northstar 3000 psi Pressure Washer for 2 months and it started leaking oil from the pump during use. Took it to Northern and they are replacing the pump under warranty but said it was likely because I was using quick connects on my garden hose coupling and that was restricting the water flow making the pump overheat. They said never to use quick connects on the garden hose unless the opening is at least 5/8". Does anyone make such a quick connect? I hate having to screw the garden hose o


It is easy to check if your hose and quick connects are supplying enough water to the pump. Your pressure washer gallon per minuite requirements are printed on the machine and also on the pressure tips in GPM. Your post indicates 2.5 gpm but check yo ... Northstar Pressure Washer 3000 PSI

Part where garden hose screws into is stripped and keeps blowing out of machine under pressure.


... Karcher G3025OH Pressure Washer

Power washer not spraying hard - FAIP Powerwasher Universal Pressure Washer Garden Hose Filter Kit 81K050SH


Bud,\012Another possibility is that one or more of the check valves are not working properly. A quick test is to look and see if water is coming out the bottom of the pump when spraying. That would indicate worn seals. If a piece of foreign mater ... FAIP Powerwasher Universal Pressure Washer Garden Hose Filter Kit 81K050SH

I have a campbell hausfeld 2450 pressure washer with water coming out of a brass hose nozzel right next to where you screw the high pressure to the pump as soon as you turn the water on from the house, start it up and high pressure comes out of it and the hose about half pressure, any ideas?


This is called the chemical injector which enables you to insert the hose for you to dispense the soap and or chemical by utilizing a soap nozzle .apparently inside this barb you will find a ball a spring and a o-ring,find the replacement parts or ki ... Campbell Hausfeld Pressure Washers

Dishwasher leak I have a Siemens dishwasher. There is a leak at the inlet hose and I don't know how to fix this. The inlet hose is not just a screw on/off like most other dishwashers! Please help!


It is difficult to see properly from the video but it appears that the fitting under the tap is the sort used on copper lines that have a flair inside the nut that fits on a taper on the tap.. Have you tried tightening the nut. or remove the hose and ... Dishwashers

I have a Champion CWP1600w pressure washer MK2 but drain hose for MK1 Can I get adapter Bayonet for old hose to fit newer model CWP1600w


... Pressure Washers

I have a hole in the water hose to my pressure washer. Can I fix it or do I have to buy a new pressure washer? Loraine


... Pressure Washers

I have a NorthStar pressure washer M157471A.It has started leaking from the pump. I have stripped it down and would like the valve kit A and the piston seal kit B item 5026 0257 and 5026 0256 . Were will I get these from?


NorthStar is a Northern Tool housebrand. You can contact them using the information below, and order the parts that you need.Contact a Northern Tool Product Expert:Call 24/7: 1-800-221-0516Alternatively, you can also or ... Northstar Pressure Washers

I have a built in tecnik tkd7000%2F2 dishwasher. The door which the fitter attached was held on by 4 screws which were directly screwed into the wood of the door. After a short time the door fell off. Can you advise whether the door should be held on with some sort of fixing kit? thanks


Some DW have a fixing kit, but doors can also be secured as yours is. You could put slightly longer screws in but please check as you do not want to screw right through the door. If you look around the inner edge of the DW door there are sometimes ot ... Tecnik 18 in. TKD7000 Built-in Dishwasher

I'm in Afghanistan with a MI-T-M GH-3504-OEGH. We lost pressure from the pump. One: I'm looking for a manual for this Pressure Washer. TWO: Seal kit to fix the problem. I know they need to be high pressure seals or O-rings so I don't want to do a quick fix leaving us to rebuilding the pump again


... Mi T M Mitm 3500 Psi Hotcold Portable Gas Pressure Washer

There is a leak at the top of the manifold which is positioned under the engine...Is there a repair kit or suggestions for a fix. It seems as though the water is coming from a bolt at the top of the manifold. Thanks in advance for your help!


If this manifold is held on by 4 Allen head screws it is very common for the rear o-ring to become damaged and cause the unit to leak.What is the model number of your pressure washer. ... Pressure Washers

I left my craftsman pressure washer (the big one) running while i went for detergent. The pressure hose blew off and now the threads are stripped. can u help me?


You have more problems then just a stiped thread. the machine shouldnt be producing that sort of pressure if you dont have the trigger pulled.sounds to me like the pressure switch is faulty ... Pressure Washers

Stripped male outlet on a karcher 3.86 pressure washer


... Karcher Pressure Washers

I have a Craftsman pressure washer model 580.752020. I ordered a pressure hose according to the manuals parts list (203961GS) but does not match the original hose I removed from the washer. A hose #31


... Craftsman Pressure Washers

GE portable dishwasher connector hose slips off faucet adapter


... Dishwashers

Leaky Tub our dishwasher was leaking quite a bit. i checked all the hoses, and connections, it turns out that there were two screws from underneath protruding into the tub, near the rear on either side. If any one knows if the tub could be fixed or replaced could you let me know? Also if this was a manufacturing problem shouldn't sears be responsible?


Are you sure that water leaking out from these two points.\015\012If this is the reason for the leaking, it's absolutely a manufacturing problem and you should forward your problem to Sears to take care fot it !!\015\012Generally,this problem could b ... Kenmore 24 in. 17019 Built-in Dishwasher

I have a Black & decker-pressure washer and the problem is the hose was broken. How can i fix or where i can buy a new one?


Duck tape if it's completely dry and extremely tight. Mabey epoxy but that might not be strong enough. I would just get a new hose at blackanddecker . com or ebay ... Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1238 seconds