Having problems with your Karcher 2500 PSI Pressure Washer ?

Karcher 2650 power washer Honda GC190; how to remove flywheel

\015 I have a Karcher power washer with the Honda GC190 engine. The connecting rod broke at the bottom. I've opened up the engine to replace it and can't remove the flywheel to replace the rod and piston assembly. Does anyone know how to remove the flywheel / cooler so I can replace the rod?By the way, I've read a lot of posts here from others who have had a hard time pulling the starting cord. I experienced this too, and had to end up having a shop replace the camshaft. If you have this problem, the part from a shop was $18 + labor. If you're handy, you may be able to install/replace camshaft yourself by opening up the top by removing the 4-10mm bolts from the top cover.\015

Answers :

Repair Help & Product Troubleshooting for Karcher 2500 PSI Pressure Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Karcher 2650 power washer Honda GC190; how to remove flywheel


... Karcher 2500 PSI Pressure Washer

Karcher 2650 power washer Honda GC190; how to remove flywheel


... Karcher 2500 PSI Pressure Washer

The last time I used the pressure washer was running fine. A few minutes later I tried to start it up and could barely turn it over. I removed the recoil and could turn it a little easier backwards. The motor is a Honda GC190 on a karcher pressure washer and has 20 -30 hours of running time. Thanks Clint


... Karcher 2500 PSI Pressure Washer

My power washer has no water pressure - Honda Karcher G2400HH-R Pressure Washer


... Honda Karcher G2400HH-R Pressure Washer

Cannot figure out how to remove the oil plug to drain the oil. Label points to a spot that looks like it might be a plug, but can't figure out how to remove it. It is a 2500 psi Mdl VR2500 Briggs & Stratton engine Honda Power Washer. Ken from NH


Should take a 3/8" socket extention ... Pressure Washers

How do you remove the plastic internal fitting from the casting to replace the water inlet elbow on a karcher 440 power washer


... Karcher Pressure Washers

Honda power washer flywheel stuck


... Honda Pressure Washers

How to remove wheels from Karcher power washer


... Karcher Pressure Washers

At the beginning the pressure washer was running but there was no power from the nozzle. I stop the gun trigger, remove the nozzle , it works for 1 minute and stop working again Now the washher pressure turns off on its own after 1 minute or less Honda 2400 psi


See attached link:\015\012http://www.wmpcs.com/index.php?main_page=page&id=14\015\012\015\012If you continue to have the problem you m ... Honda Karcher G2400HH-R Pressure Washer

I need to remove the water pump from honda 9.0 gx270 power washer


... Honda EMBLEM GX270 9.0 - HN 87521 ZH9 020

5.5 HP Honda on a Karcher pressure washer. Will only run in full choke mode. When choke is closed for normal operation, motor conks out. I have removed Air filter and inspected operation and butterfly is operating correctly. What to check next?


Fuel mixture screw ... Pressure Washers

Can't get soap to mix with sprayer of Honda gc190 Power Washer.


They only pull the soap out with the low pressure nozzles ... Pressure Washers

Poor pressure karcher g 2500 pressure washer with a 5.5 honda engine. No high pressure, hose pulsates as does water out of the outlet. have removed the unloader valve twice and cleaned it to no avail


I had this same problem on my pressure washer.the pump had some broken parts in it .i found my replacement pump on EBay. ... Karcher 2500 PSI Pressure Washer

Cant remove the hose - Karcher K2.26 Electric Power Washer


I am guessing that you are talking about the power hose. There should be a "quick connect" fitting on the end. Make sure the unit is OFF. Hold the round metal part that the hose plugs into next to the pump and the little metal end of the hose that ... Karcher K2.26 Electric Power Washer

What kind of oil does the karcher gas powered pressure washer take its a Honda engine with 3000psi


10W30 ... Karcher Pressure Washers

My Karcher vert shaft Honda powered washer cuts out when your washing kinda like when you release the trigger (except you haven't) like the relife is opening early what's wrong?


They USUALLY don't have aa true relief valve, but instead when pressure is up, it prevents any more water from enetering the pump.\015\012\015\012REBUILD the valve as usually the O-rings in it are worn. ... Karcher 2500 PSI Pressure Washer

Karcher power washer starter cord cannot pull


... Pressure Washers

Karcher Power Washer that surges up and down with water pressure.


Before you start it up:\015\012\015\0121. Disconnect the high pressure hose\015\0122. Connect the water supply and turn on\015\0123. Make sure water is flowing through the pump\015\012\015\012Start the motor, run for about 10 seconds and ... Karcher 2500 PSI Pressure Washer

Honda Pressure Washer tilted on front - will not restart


If the machine has been tipped and oil has got into the combustion chamber then it will have gone through the carb first. There should be a couple of 10mm bolts on the bottom of the carb bowl, the lower central one holds the bowl on and the other is ... Pressure Washers

Power washer I have a karcher power washer and it haves a 7.0 robin motor on it... When i start it up the motor just goes in to high speed... I looked to see if all the springs are on the arm and they are ....All i can think of that the governer on the motor is not kicking it back... If you could help that will be great....Thanks Jerry


... Karcher 2500 PSI Pressure Washer

Karcher 2.9 pressure washer leaking - Karcher K2.26 Electric Power Washer


... Karcher K2.26 Electric Power Washer

Pulsing and leaking Karcher washer K4.99 - Karcher K2.26 Electric Power Washer


... Karcher K2.26 Electric Power Washer

Honda pressure washer-2400 psi 5.0 hp - Honda Karcher G2400HH-R Pressure Washer


... Honda Karcher G2400HH-R Pressure Washer

I have a Honda ,gas powered power washer and when I squeeze the handle the water pump kills the motor. I've let the engine run until warm and it still can't take the water pump engaging. It's a three year old washer.


... Pressure Washers

I have a Honda GX390 power washer and need to know what special fluid to use for inside the power washer itself. Thanks.


30w non detergent pump oil, not motor oil. ... Honda Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1287 seconds