Having problems with your Karcher 2500 PSI Pressure Washer ?

Very low pesure

\015 Very little presure at nozell. i changed nozells an all very low presure. i took off water hose to see if restrickrd. was not, i made sure hose was no kinked. i made sure getting lots of water. when it is running it is surging at the hose a lot worked great last week.\015

Answers :

Make sure that all the air inside the hose is out, sometimes pressure washers have a hard time bleeding out the air. Lastly it could also be your pressure relief inside the valve body of the pump the spring can get bound up and basically stay on relief, like when you let off the trigger it doesnt just blow the line or stall the motor good luck\\
Repair Help & Product Troubleshooting for Karcher 2500 PSI Pressure Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Very low pesure

Make sure that all the air inside the hose is out, sometimes pressure washers have a hard time bleeding out the air. Lastly it could also be your pressure relief inside the valve body of the pump the spring can get bound up and basically stay on reli ... Karcher 2500 PSI Pressure Washer

It won't complete a full wash cycle keeps stopping part way through and low rinse aid, low salt lights flashing even though both are full ??? Pamphlet says this might also mean there is a kink in the inlet hose but that seems fine as well. Have had the dishwasher 3 weeks and it has completed about 4 cycles without stopping ???

Check water valve to see if it has something blocking water supply ... Dishwashers

Low Pressure The output pressure seems very low. No crimps in the hose, the engine runs fine, the nozzle seems "open". Any suggestions?

... Honda Black Max 2600 PSI Pressure Washer

I have a Samsung dishwasher and a code comes up that says that there is a low-level water function problem. The solution in the manual says to run it empty to clean it. I suspect that the water level chamber may have food deposits in it causing the low-level sensor to misfunction. Where is the water level chamber and how do I clean it?

... Samsung Dishwashers

Low pressure upper and mid level not putting out spray low level barely spinning

Hi,This is most often caused by debris in the sump area of the pump for this model. Here are some instructions on how to clean it out. Follow the link and let me know if it helps. ... KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher

We have and older Jackson model 10 AB at church, used 10 to 20 times per year. The pump motor quit this summer and was replaced by a local appliance service company. About $700 job. Upon using it recently, the first time since the new pump was installed, the RINSE cycle seems very anemic, that is, low volume and low spin rate. The dishes were not completely rinsed. Temperature was correct, 185 degrees. The service person came back to look with no improvement and now the Heaters will not co

Sounds like a wiring problem but it is controled by a thermo to make sure you get to the proper tempt . so ck the connections and mke sure the thermo is good . . and the element is good . ..hope this helps mm . ... Jackson 10A Free-standing Dishwasher

Low pressure While I initially get high pressure, when I resume washing after having released the trigger, water pressure is low. By removing the nozzel tip and reinstalling, high water pressure is resored. What is happening?

If this keeps happening repeatedly it sounds like you need a new seal kit put in it can be done easily enough by you or you can get a shop to do it , if you live in a cold winter climate be sure to winterize the washer every year or keep it somew ... Karcher 2500 PSI Pressure Washer

I have a mod. GSD2200G00WW . It has low water level and not enough pressure to turn the spray arm. When first starting i see water coming in but not enough. I added water in manually with a container and turned on and the spray arm rotated fine. I closed the door and turned back on and the water drained out of it instantly back to a low level. What now?

... GE Dishwashers

Pump is constantly running - trying to pump out water, although there is no water in the tank. This condition remains the same AT EITHER AND ANY reset positions of buttons ABC or programme buttons. Programme END indicator is NOT lit, LOW SALT indicator lamp is ON, LOW RINSE-AID indicator lamp is ON. No apparent blockages. Supply water water is on and free flow.

Hello, welcome to FixYa.\015\012\015\012Based on your description it sounds like the emergency overfill switch has been actuated.\015\012\015\012Here`s what to do and what to look for. ( unbeknownst to many this is built by B/ ... Neff 24 in. S5543X2 Built-in Dishwasher

Turn water on then actuate wand trigger. Pressure washer leaks when wand trigger is actuated and has very low pressure/flow output. After releasing trigger the pressure cycles on - off at approx 1 second interval. I suspect that the plasstic oulet tube is leaking causing low pressure leak out of bottom when trigger is actuated and causes pressure switch to cycle when the trigger is released. Any Help? This pressure washer is approx 18 months old!

You gave a very close solution yourself for the problem. But other leakages can cause such symtoms.Forexample a leaking head or a leaking chemical inlet. These can be caused because the spill valve (pressure control valve) is stuck. When this valve s ... Karcher PSI Electric Pressure Washer

Water level is low and does not spray on dishes while dishwasher is in operation the water level is low and water does not spray from the arm onto the dishes.

Hi it sounds like your float is sticking in the UP position or partially up so your unit is not getting a full load of water for washing your dishes. \015\012\015\012 This is a "How to" very useful link:\015\012\015\012 ... Jenn-Air JDB6510 Built-in Dishwasher

Dishwasher control buttons do not work. Machine is stuck on low wash and headed dry. Pushing butttons on crontrol panel do nothing. Dishwasher seems to work, fills with water , you can here it run it's water agitation, and drains, but only works in low wash

Hello,This means the touch pad has failed, you can make this repair it's simple. Try flipping the breaker off for several minutes this may reset the glitch.Applian ... Dishwashers

I have a GE potscrubber portable dishwasher and when i connect the hose to the facet and plug in to the outlet and turn the dial to start the dishwasher up all i hear is a low humming sound. I tried truning the knob around a few times and still the same low himming sound.

I have this same problem with the same dishwasher. Did you ever find what was wrong with it? ... GE Dishwashers

DeVilbiss/Excell XR2600 unloader acting up(low pressure) I removed the onloader cleaned and replaced now it loads up too much, engine wants to die but still has low pressure after initial burst?

... Pressure Washers

Waterintake stops after approx. 35 sec.waterlevel is to low,detergent compartement will not open because of low waterlevel and also water will not heat, because heating element is not covered with water. If I put water in by hand to get the waterlevel above heatingelement everything is fine. Dishwasher has been working without any problems till approx. 18 mths ago. Have also adjusted waterintake time as described in manual by taking off dial knob and adjusted with small flat skrewdriver, but not

The machine fills by time only as you have already determined. The intake screen on the water valve is probably plugged up and cleaning it should solve your problem. You will have to turn off the supply to the dishwasher and disconnect the water feed ... Dishwashers

I have a Frigidaire Model Number GLD4355RFS1 Serial Number TH80493988 Dishwasher. It quit working when the Rinsing Agent Low light came on. We filled the rinding Agen dispenser with hopes that it would come back on. The Rinsing Agent Low light went off but the unit never came back to life. When the room is totally dark, you can just barely see the lights in the LED display and other lights. It will not come back on. I tied turing the power off and the "PH" alert is displayed in t

... Frigidaire Dishwashers

Craftsman pressure washer with honda engine. low pressure and volume on high pressure setting. lots of water volume on low pressure setting. Screens not clogged.

Sounds like pump is not making pressure. Thats why you get flow, but no pressure.\015\012If it sat for awhile, check shaft connection to pump. Sometimes the impeller or shaft will shear partially due to corrosion when stored. Seals on pump valv ... Pressure Washers

Model 110 - 20722990 sur ck 0966307 type 111 - Suddenly on the spin cycle - it started making a high pitch sound - ( should we stop using it immedicately - or can my wife presently keep using it ) - when you open the top cover - it stops - what I want to know if a handy man can fix it ( thats me ) or should I call a appl. person - and the steps to fix it ( also what is your charge - it says as low as 10.00 ( I hate as low as ? )

Hello. That sound is an indication that the transmission is on it's last legs. This is not a repair that a handy man should attempt. In fact, if this machine is more than three years old I would not recommend a repair. You would be better off to ta ... Dishwashers

My simoniz 2900 pressure washer revs high low.

... General Pressure Washers

Need portable DW but have low hot water pressure in apartment

All dishwashers i am aware off have their own heater and are better connected to cold not hot water ... Dishwashers


... Dishwashers

Karcher 378M Plus Motor idle High and low or start and stop

... Karcher K2.26 Electric Power Washer

Low presure and dirty dishes

Yes. ... Dishwashers

Karcher pressure washer works only with low pressure

The inlet screen orientation is of no consequence. Either way should work fine. Check two things...\015\012\015\0121) Many of the spray nozzles have a high and low setting at the tip of the wand (where the water comes out). See if your no ... Karcher G3025OH Pressure Washer

Briggs & Stratton CleanShot model 020206-0 - Low pump output

... Briggs & Stratton Pressure Washer Projectpro Spray Nozzle
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0176 seconds