Having problems with your Karcher 2500 PSI Pressure Washer ?

I just bought a used Excell XR2600 pressure washer and it stopped working after the first half hour. It seems like it has not fuel, switch it does. is there a fuel on off valve on the machine somewhere that I can't find? Thanks Ed


Answers :

Repair Help & Product Troubleshooting for Karcher 2500 PSI Pressure Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I just bought a used Excell XR2600 pressure washer and it stopped working after the first half hour. It seems like it has not fuel, switch it does. is there a fuel on off valve on the machine somewhere that I can't find? Thanks Ed


... Karcher 2500 PSI Pressure Washer

Indesit d41 dishwasher overfilling, pressure switch seems ok(checked with multimeter) ,when pressure switch is manually operated the electro fill valve remains open. only time fill vave shuts is when power is off or door is open. can someone please help as i cant find wiring diagram or service guide online


Possible faulty pressure switch or a faulty drain pump ... Indesit 18 in. D41 Slim-Line Free-standing Dishwasher

I have a bosch SHV43A03GB dishwasher. It has a problem when it cut out water flow in. the guy who repairs it seem s only to have to push a button or switch under the machine to get it to work again, cant find switch/ button- please help!


Programmer not working ... Bosch 24 in. SHU53 Built-in Dishwasher

I have a Karcher K3.48M electric pressure washer which used to shut off when you weren't using the cleaning wand. This no longer happens and there is alot of water running out of the bottom of the unit. (This didn't used ot be the case) I expect a leak somewhere inside the unit, but I'm wondering even more if there is a pressure switch which has failed that cased the leak. In other words, if I find and repair the leak and there is a failed pressure switch, it will likely only break again. I can'


Hi you will have a 8 digit number on a silver plate on the machine with a number like 1.141-470.0\015\012Then go to www.karcher.com then on the left click on Europe, then you ... Karcher PSI Electric Pressure Washer

I have a ADP5000MT, when I start a cycle it begins but after 5 mins switches to the bottom option - the =30''V symbol button and keeps flashing .. I cant find my manual


CODES: The Express program light Keeps flashing quicklyMEANINGS: Longer inlet timePossible Cause: Faucets is not opened, or water intake is restricted, or water pressure is to low. ... Whirlpool Dishwashers

Cant find fuel filter on honda gc190 motor - Pressure Washers


... Pressure Washers

I was replacing the hose and a little spring popped out of somewhere. The spring has a clear plastic end also. The whole thing is about an inch and half long. I believe it goes with the yellow trigger handle but cant find where it goes


... Karcher K2.26 Electric Power Washer

Beko dwd3410s dishwasher water not heating up cant find a manual for it and cant find the heater element


Go to www.beko.co.uk\015\012then to support & at the bottom of the list is manuals ... Beko Dishwashers

Model No. DU850SWPU3 AND SER. FT 4101406 TYPE 280-0. When cycle is complete and in off position the dishwasher fills with water. I find the bottom of the dishwasher standing full of water when I get ready to fill with next load of dishes. When I remember to turn off the wall switch this does not happen, however once in a while I forget to turn off the wall switch. The next day I find the bottom of the dishwasher full of water again. I then have to go through the cycles manually a couple of tim


If by turning the wall switch off, and only then it stops comming in, it means the board is faulty. There is a leak in the electronic system allowing to solonoid to stay partially open. Strangs that it doesnt flow onto the floor. ... Whirlpool GU2400XTP Built-in Dishwasher

I can't get the igniter to start on north start pressure washer #157224. Fuses ok, indicator light in heat switch does not illuminate. Blower works, fuel dripping out. Cleaned fuel tank and pump and filter too! Tried jumpering past the thermostat didn't help either. Also, swapped pump and heat switches on main panel. No help!


... Pressure Washers

Bosch she4am Diagnostic program indicates door switch error. Troubleshot the magnetic hall effect style switch, it reads 8vdc or so with door open and almost 12v with it closed. Can't find any information in this style door switch,,,thoughts?


... Dishwashers

I have a excell 2500 psi max honda 5.5 ho vr2522 2.2 gpm presser washer and has been stored for about a year, still looks brand new and has only been used twice before, it has oil and was stored with no gas in the tank, i put fresh gas in the tank and blead the fuel bowl until fuel ran out like it should, the washer wont start, ive checked the turn on switch as well and the fuel cut off knob, i spayed gas in the carb and it fired up but stopped running as fast as it began to run, its not getting


... Honda Black Max 2600 PSI Pressure Washer

I need to replace the heating element and electronic control board on my Kitchenaid KUDS01DL Dishwasher. I have the parts. I have been able to find directions on how to replace the heating element, but am not finding anything on the electronic control board. I don't even know where this part goes. I am guessing somewhere in the door, but can't find any instructions. Help...


... KitchenAid 24 in. KUDS01DLSS Built-in Dishwasher

I have a Karcher 2,600 PSI 2.3 GPM Gas Pressure Washer G 2600 VHR that I have used once last summer. I have stored the PW in my basement with no fuel in the gas tank. The PW was never exposed to freezing temps. I cannot get the PW to start. I put new fuel into the tank, the oil is good, I drained the carburetor, and the spark plug works (tested it). I pull the cord and the engine doesn't turn. Fuel value is on, choke is pulled, and the starter switch is turned on. System is practically brand new


Hi I have a similar pressure washer from Kartcher and the same scenario as yours I have owned it for about 2 years and noticed that it was getting harder and harder to start with each time I use it which is months. If your pw has a honda engine on i ... Karcher G 2600 VH Gas Pressure Washer

Fuel pump not working when trigger pulled, all temp. lights on. checked flow switches all ok and new fuel pump coil an stalk fitted. the burner will work if the o ring removed from bottom of stalk allowing fuel through so something is stopping coil from getting 24v(it does get a nominal voltage of 10v)... anyone got any thoughts


... Pressure Washers

Like sand Not getting the dishes clean it seems like sand and other stuf in the glasses :( cant find any extra filters , have clean the regular ones in the bottom of the machine. Please can someone help me find a solution or find a manual online.


Clean out both top and bottom spray arms\015\012Deep Diver ... Bosch 24 in. SHU5305UC Built-in Dishwasher

Starting problem will not stay running spray starter fluid will run till out, itis like it is not getting fuel new fuel added just cant keep it running. any suggestions/ Never had this problem before, thanks scott


I had the same problem and what I did fixed mine. I got it running with the starter fluid then pushed the linkage (Rod) on top of the carb and ran the engine wide open (by pushing the linkage), then released... then wide open again. I did this 4 or ... Karcher G3025OH Pressure Washer

My Asko dshwasher type d-95-2 Model D-1706, serial no. 012700714541. It is stuck with the drain pump runningt in all settings of the cycle control. I have moped all of the water out5 of the lower well. My research sujest a stuck float switch. How and cwhere do I find/ access the float and/or switch? thanks, John


Unplug the washer, turn off water, Disconnect water and drainage hoses, have a towel handy because some water will spill out.Tilt\015\012the washer upright and manually move the selector through the cycles\015\012slowly listening for the ... Asko D1706 Built-in Dishwasher

I have a dishlex global 270 i cant find a model no i only have a serial and manufacturers no. What i wanted to find out is does this model have an element that heats the water. I only have one hose and when i used it with cold water it didnt heat up so i am using hot water.


Hi\015\012\015\012\015\012Thanks for using FixYa. I hope you understand that no one can tell you what are the specifications of the product until you provide the model no# however, dishlex usually have element in their dishwa ... Dishwashers

Hotpoint fdw70 error code A10 have replaced the inlet water valve but still have an error code flashing A10 hoped to find a reset button but cant find it anywhere can u possibl advise.


... Hotpoint 24 in. FDW60 Free-standing Dishwasher

GOT A KARCHER HDS755 BUT THE BURNER DOES NOT WORK.IT HAS FUEL GOING TO THE NOZZLE AND HEAPS OF SPARK.WHEN I OPERATE THE MACHINE WITH THE BURNER SWITCH ON AND FUEL LINE DISCONNECTE FROM NOZZLE,MACHINE WORKS FINE WITHOUT HOT WATER.WHEN RE CONNECTED,THE MACHINE WANTS TO CUT OUT.


Hi Please check your oil zzle is not blocked at all. Remove the burner head and renew the nozzle. If that fails you will need to check the fuel pressure from your fuel punmp which should be at least 9-10 bar. ... Pressure Washers

Model 01902 2350 psi . engine runs fine , sprays out nozzle but lower pressure and water sprays out plastic elbow on relief valve , that is supose to **** in soap if used , cant hold finger over spray from elbow , high pressure , took apart relief valve and plastic valves all orings are ok , brass pump seals look ok , all back together , still blows out elbow . ?? plastic spools were out by somebody else , not sure if they are in right , cant find picture to compare .


It sounds as if the non return valve in the elbow is the wrong way around .The o-ring normally goes in first then the ball then the spring. Try it and good luck. ... Pressure Washers

Hobart LX30 Thank you for your help earlier. I figured out a way to get the machine running on 220. Now my problem is finding the intake for the sanitizer and detergent. I have looked all over the machine and I cant find tubes anywhere. The guy I bought it off of tells me that when the water temp is over 170 you don't need any cleaning products. I just want a second opinion. I feel that our glassware is not as clean as we would like. Any thoughts?


I'm not sure I'm comfortable with the direction your seller is leading you. I assume this machine is installed in some type of place where you are serving food to the public. If this is the case, then the local health inspector will expect to see a w ... Hobart 24 in. LXIH-3 Built-in Dishwasher

The top spinner on my dishwasher is not working but the bottom one is. I think the line is either clogged somewhere along the line or there is a bad connection somewhere so it isn't getting the pressure it needs. How can I find the problem?


... KitchenAid 24 in. KUDP02SRSS Stainless Steel Built-in Dishwasher

Will not fire.blower runs.have 120voltage.to all switches blower and ignition sparks blue. I think its a no fuel problem what can stop fuel flow


Empty tank. ... Northstar Gas Powered Wet Steam & Hot Water Pressure Washer 3000 PSI
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0728 seconds