Having problems with your Karcher 2500 PSI Pressure Washer ?

The handle leaks and seems to not have the tension on the handle. I have it apart and it seems like a tension string is broken but I can't see how it reconnects.


Answers :

They don't offer parts for the trigger guns, you would just need to purchase a new trigger gun. There is a number of different trigger guns for these machines though, what is the model and part number of the machine that you have?
Repair Help & Product Troubleshooting for Karcher 2500 PSI Pressure Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The handle leaks and seems to not have the tension on the handle. I have it apart and it seems like a tension string is broken but I can't see how it reconnects.


They don't offer parts for the trigger guns, you would just need to purchase a new trigger gun. There is a number of different trigger guns for these machines though, what is the model and part number of the machine that you have? ... Karcher 2500 PSI Pressure Washer

Bosch dishwasher the string on the door tensioner has broken I have the new part but dont know how to got out the lower part. Do I have to take off the hole door or is there an easy way to change it? It seems odd that as its string and must be prone to breaking that there is not a simple way to fix it.


You have to remove the entire dishwasher from under the counter. Then locate the broken cable. There is a panel you need to remove to access it. It attaches to a spring which goes to the underside of the dishwasher. Not an easy repair. Need alot ... LG 24 in. LDF 7811 Built-in Dishwasher

I have Frigidaire model FDB130RGS3. This seems like a pretty cheap dishwasher that is provided by my management company. This is third dishwasher I've had in this apartment. The others have all broken. Now this one, which is less than 6 months old, seems to have broken. It does not clean the dishes. I removed the round plastic cover in the base of the dishwasher and the bottom of the dishwasher (sorry don't know how else to describe this) is filled with dirty water. I drained the water and tried


Hi,\015\012\015\012the round plastic cover in the base should just push back on, but you need to make sure it is correctly rotated before doing so. It should look like this:\015\012\015\012\015\012 ... Frigidaire FDB130 Built-in Dishwasher

Dishwasher will not fill with water. I've already checked the float assembly, that seems to be working fine. The water just doesn't seem to run into the machine. Little history on an unrelated problem: I want to mentioned that not to long ago my brother tried to put a bunch of celery through the garbage disposal. The sinks and pipes got all clogged up and we had to take them apart to clear up. Immediately afterwards the dishwasher stopped filling with water. I don't see how the two can be r


Hi,\012Here is a tip that will help you to find out why water will not come into the dishwasher... Dishwasher ... GE 24 in. GLD5500L Built-in Dishwasher

MAYTAG MDBH979AWS DOES NOT SEEM TO FILL WITH WATER, AND HAS STOPPED CLEANING THE DISHES..My husband took everything apart and we cleaned each piece and put it back together , there was no indication that anything was clogged, and he was able to determine that water was coming in to the washer, but dishes are still dirty. There seems to be soap residue on the bottom of the tub. We also check to see if it was draining properly and that was fine also. Any other suggestions?


... GE Dishwashers

I have an apartment size galaxy dishwasher its all white with the turn diles i was just wondering if someone could tell me what it would be worth brand new i cant seem to find a price online


... Sears 24 in. 14181 Built-in Dishwasher

Right side door hinge is disconnected. any ideas? It seems that the pin has dislodged from the door bracket, but the pin has a cap or flange on the end that is far bigger than the hole in the bracket. it is very confusing to figure how it came apart and how to reconnect it.


There is usually a smaller pin that attaches fro door hinge and goes inside other pin that is attached to washer. The outside pin is attached by machine press. ... GE Profile PDW8400J Built-in Dishwasher

My Prima LPR660 dishwasher does not clean properly. It appears to have water in the salt container. We cant seem to unscrew the salt container to see if it is blocked. Everything else is clean and works, we just get a scale of salt on the dishes. Any tips gratefully received! Thanks Emilie


... Dishwashers

I have a Honda 5.5 hp pressure washer and it wont keep running I bought it off craigs list they said the last time it ran was almost a year ago I took off the carb and sprayed carb cleaner threwout but didn make a difference I cant seem to see any jets juist the float needle and that was clean if I pour gas in the carb it will run for a for about 5 seconds and but wont stay even if I choike it. does anyone have a answer


Try soaking the carb for 15 minutes in gasoline. If you have a plugged port just sparying may not be enough to clean it ... Honda 2500 PSI Gas Pressure Washer

Belling IDW604 Hi, I have an error code E4 showing on this machine any ideas on how to fix it?? it seems the pump is wanting to start but then does not I cant see a block in the tubes and I want clean dishes!! Any ideas would be gratefully recieved Rebecca


I found the solution myself. On the bottom plate, there is a float and a microswitch, when the water leaks onto the bottom plate it raises the float and activates the microswith which shuts down the machine and shows E4 on display. To get rid of the ... Belling 24 in. IDW603 Built-in Dishwasher

I cant figure out how to operate my simpson cascade 52 021 dishwasher it seems simple but it wnt work i dont know if its broken or if it just wont work


... Dishwashers

Whirlpool mod # GU2400XTPS6 Loud during wash cycle. I've cleaned under lower spray arm...took it apart, all the way to grinder blade and screen. Cleaned out toothpicks, broken glass, shop-vac'd the area. Noise seems the same when I put it back together.


Hi\015\012\015\012If you have opened all the way to the impeller and cleaned\015\012the drain pump assembly completely then the issue is with the pump that is bad\015\012and should be replaced. You can also check this video for replacing/ ... Whirlpool GU2400XTP Built-in Dishwasher

The door on my built in Frigidaire dishwasher is falling open. it seems like a spsring or something has broken. I am looking for a repair manual, possibly an exploded diagram so that I can see what parts i might need. Thank you, Brenda


Here is the way the springs hook up.\015\012\015\012\015\012Here is the break down.\015\012 ... Frigidaire Dishwashers

The spray arm in my single drawer dishwaSHER was not turning freely When I removed the racks I found that the little blue impeller at the centre of the base plate was jammed. How do I release the baseplate so that I can see what's going on there seem to be two locking rings round the impeller--but I cant shift them. Any advice? Or do I need a techy?


You will need a special tool to relese the 2 rings at which point the impeller will come loose. Not sure if you can purchase one over the counter. Possibly a set of snap ring pliers may do the trick but not 100% sure. I you dont have any availbale ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

When I first contacted you, I couldn't get the soap door to close in my dishwasher. As suggested I got the part. I now have the door apart. When I work the soap latch I can't see what closes the door. The part I was going to replace seems to be working correctly. over


Well IF the piece, the latch, seems to be working OK, then the only other thing it can be, is the Electronic "Drive" from the controller board, or a disconnection between the Controller and the Latch, Sometimes it can be a "Sensor" not allowing the ... Dishwashers

I have a Honda xr2600 power washer. When I tried using it, water was squirting from the top of the gun. I took it apart to find that there are o-rings on top of some kind of washer---looks like a lock washer but it's made of cardboard??? Two of these washers were broken. I can get the o-rings but I can't seem to find the washers. I tried getting the manual for this model on line with no luck. Any assistance will be greatly appreciated.


The washers that you describe are made of teflon and are split to facilitate installation and/or allow expansion as they wear. These washers are actually seals and at times are used together with orings to seal high pressure. You should ... Honda Pressure Washers

Water left in the bottom of beaumark dishwasher.there is a rubber gasket valve on the out put hose ,it seems to big . but i cant see any blockage. there is a # 572D0282 th


... Dishwashers

The soap dispenser on our Kenmore Elite dishwasher (SEARS part number 8558128) will not stay closed. The little latch mechanism appears to be working, but the spring on the lid's base keeps the lid wide open at all times. I have examined the pop-up dispenser lid to see if some sort of plastic tip held by the latch after soap is added is broken off- this may be the case but I cannot see any damage where such a lip may have broken off. Does the latch catch the lid by snapping onto a plastic lip? I


Yes its probably the little latch that holds the door closed thats worn out. ... Kenmore 15762 Dishwasher

I recently found the upper spray arm in the bottom of the dishwasher after running it. I can't see any piece broken off of it but I also can't see any way to put it back on. I suspect some small piece broke off in a very clean break and I just can't see it. Is this fairly easy to purchase and reattach myself? I can see the holder for it screws in and out easily.


Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... Frigidaire FGHD2433K 24 in Builtin Dishwasher

Karcher kb2020 domestic model electric cant seem to get the proper parts list


... Karcher 2500 PSI Pressure Washer

The door won't close. The latch seems jammed. I have tried setting and releasing the child lock inside the handle. The problem seems to be with the latch itself. From inside the door, I can see the tongue the clips into the latch, but it seems stuck. I can't get it to move, even with gentle force.


... Bosch Evolution 800 SHE58C05UC Stainless Steel Built-in Dishwasher

FDW60 dishwasher - taken apart pump and that is clear. Seems that dishwasher fills, and empties and heats all OK but water wont go around the machine ie the motor pump doesnt start - any idea how to take this out and replace without having engineer around? Taken small pump apart and its clear. First of all the Eco and fast light flashed, then we took it apart with some direction from online discussion advice. Now Eco and Pre wash lights are flashing. Machine empties water, then fills with


... Hotpoint 24 in. FDW60 Free-standing Dishwasher

The release clasp on the front of the dishwasher seems to be broken. It does not click correctly when I attempt to open the door and seems "free". For a few times, it seemed like it was hard to open but no one used a lot of force, we just tried several times and then it would open. Can this be a part I can replace myself or do I need to call a repairman?


... Maytag Dishwashers

Shu9925uc/14 bosch dishwasher leaves standing water in the bottom of the pump. The pump seems to be bad because it wont drain out the back hose. I have run the diswasher full cycle and put the drain hose into the sink to test. It wont drain at all now and I dont hear the pump. Perhaps unrelated: Pump seemed to stop working after the back hose disconnected itself from the back of the unit spilling water all over the floor. When I reconnected the unit to the wall the pump now seems to be disfunct


Hi Dishwasher not draining issue occurs due to kinked drain pipe, clogged drain filter or drain pump. Check the drain hose for any visible clogging, remove if present. If no visible lint is present then remove then turn off the dish ... Bosch SHU9925UC Built-in Dishwasher

Our dishwasher seems to be stuck in drain mode. My daughter put the wrong kind of soap in it. She accidently put Regular dish washing soap in rather than machine dish washing soap. We've got all the suds out. Seems to drain water just fine. However we cant seem to get it to add water. Does the soap have anything to do with it? Anything I can do from my end? Please Advise. Thanks


Plastic base is full of water. Need to remove whole unit to access bottom and dry it out. ... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0972 seconds