Having problems with your Karcher 2500 PSI Pressure Washer ?

Backfire when turning off

\015 The pressure washer backfires when I turn it off and takes a bit till the engine will go off\015

Answers :

Let it idle down after using it then shut it off the carb could be leaking a little with the bad fuel we get only lasting 30days i always turn off the gas and run the gas out of the carb
Repair Help & Product Troubleshooting for Karcher 2500 PSI Pressure Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Backfire when turning off


Let it idle down after using it then shut it off the carb could be leaking a little with the bad fuel we get only lasting 30days i always turn off the gas and run the gas out of the carb ... Karcher 2500 PSI Pressure Washer

Homelite power washer 3100 psi backfire when I turned off engine


... Honda Pressure Washers

Carb hunts at wot and at idle, it will backfire if your not running the trigger. exhaust pipe turns red. seems to be lean. carb is clean with a new kit, fresh gas, and spark plug. if i add some choke it runs better. all the jets are clean. carb was disassembled and soaked in engine tuner.


It sounds like it is running really hot. Did you check the air filter and oil level. If not these it could be the muffler. ... Porter Cable Pressure Washers

Pressure washer backfires an kinda misses


... Troy-Bilt 2700 PSI 2.3 GPM Gas Pressure Washer CARB 020487

Pressure wont start, small backfire, black smoke


... Karcher 2500 PSI Pressure Washer

Brand new Stanley 1800 power washer - just bought it yesterday. Powered it on - realized I hadn't turned the water on - so turned it off - turned the water on and turned the Stanley back on - it ran for a second and powered off. Now it won't turn on again. Did I burn out the motor?


... Stanley Pressure Washers

Child Lock light glows without pressing Energy Saver Dry button for four seconds. Cannot turn off by pressing Engery Saver Dry button for four seconds. Turning off main power and turning back on doesn't solve problem. But turning off main power for extented period, over night, and turning back on does fix proble for a very short period but Child Lock does come back on by itself. Is replacing the Console Assembly the only fix? Is there some button sequence to disable Child Lock altogher?


The mini manual for this dishwasher is located behind the kick plate. The mini-manual reveals that the child lock (called a control lock in the manual) can be disengaged by pressing and holding the air dry button for four seconds.or ene ... KitchenAid 24 in. KUDS25 Built-in Dishwasher

My AEG Favourit F35080vl is behaving strangely. When turned on, the lights don't light and it doesn't work, but it emits a ticking noise! After an hour or so it works (until yesterday), and is ok, unless turned off. It was inadvertently turned off at the weekend, and now ticks whenever turned on and refuses to behave normally again. We got a local repair man out who replaced the logic board at a considerable cost, and it has made no difference. He says he doesn't know what to do next! Any ideas?


Try another repaiman one who does know ... AEG 18 in. Favorit 54750Vi Slim-Line Built-in Dishwasher

My Maytag dishwasher goes for long stretches when it won't turn on even though I push the proper buttons. The buttons won't light either. It turns on by itself after a couple of weeks of sitting idle. Some of the lights may blink on the start panel while the dishwasher doesn't work, but only on occasion will it fully operate. I have turned off the power and turned it back on, hoping to reset the computer part of the dishwasher. It didn't work.


The Control Touch Panels like to fail on may brands - especially Maytag. They are sensitive to humidity - and a lot have the vents out the front - right by the control panel.Please reply using "continue with this expert ... Maytag Dishwashers

We have a ASKO D3450, and it have worked perfectly well for 8 years. Today we have a problem with it. It look like the children-secure is activated becouse the AUTO-lamp is lightning. We try to turn it off, by turn off the power, hold the two keybuttons and turn it on again, press program; and then the AUTO-light should be turned off, but this dosent happend. When we close the door, the machine start to wash, but it seems that no program is activated, and the soap chamber does not open at all.


You have lost the control board.... ... Asko 24 in. D3450 Dishwasher

Bosch SHX46A (6 years old) Selected regular cycle, pressed On and closed door. Cycle did not start normally. Pump runs, but no water is coming into the DW. I confirmed the water supply line is turned on. I opened door, turned off On/Off switch, then poured water into drain. Then turned On/Off switch on. DW began pumping water OUT of the DW. Also, it doesn't matter if the door is open or closed - if you turn the DW on, the pump will run. I suspect a problem with the electrical controls, or perha


From your description, I doubt that the problem is door latch is the cause.\015\012\015\012The first thing that a modern dishwasher does before it begins to fill with water is run the drain pump.  It appears that this DW is not progressing ... Bosch Integra® 500 SHX46A0 Dishwasher

I have a SMEG DWF614 SS dishwasher. I continue to get an E8 error message. The diverter valve motor turns freely & the motor turns freely when they are seperated. However, when they are assembled, the motor turns the valve & continues to try turning the valve when the valve is on its stop position. Is the motor & valve faulty or is it the control. If you can answer, what part number would I require. Regards Leighton Davies


... Smeg 24 in. DWF614SS Stainless Steel Free-standing Dishwasher

My Delonghi Dishwasher keeps turning off. The dishwasher is turned on at the power point. The water is turned on. Okay When I press the POWER botton on the front it wont stay on. I have to keep my finger on the POWER button and then press the START button for washer to work. If I do this it will then pump out any water in the bottom and start to work. ***BUT when you take your finger of the POWER button the washer just turns off and stops working. Do you have any idea what could be the problem p


Yes, the power button is faulty. by pressing the power button forcefully, you are in effect allowing the contacts to close. Replace it. ... Dishwashers

The dishwasher makes a humming sound when turned on. No matter what cycle it is turned to, it continues the humming sound and does nothing else. I thought I could reset it by unplugging it, but as soon as it is turned on again, it continues the humming sound.


... Miele G848I Dishwasher

Don't know the brand of my jetted bathtub, which blows water. The round on-off dial just stopped functioning - stuck in ON mode. Using GFIC, it turns on & off just fine, so problem is with the round knob. Unassembled dial and removed. Have piece that turns, round at top, narrow flat at bottom with a little black metal wheel that comes out. Wheel function not clear, given how dial turns unrelated to wheel. Inside hole, all plastic. Center spike fits into removed piece with wheels. 2 black pl


Ok this is not that easy to picture, any chance of emailing photo?([email protected]) the electrical connections will be somewhat remote to the dial so as to isolate the wet user from the power! can you after switching off at the breaker, get behi ... Dishwashers

F1 appears both drawers are flashing and beeping can't turn off power (it turns off for a moment and then turn itself back on with F1 code, beeping and flashing) Unplugged it hoping it would reset, it did not.


F1 means that the flood sensor has been tripped. Remove the bottom draw and dry the water out. Mop the majority out and use a hair dryer to get it all nice and dry. This should clear the f1. There may be underlying issues of why the unit has leaked b ... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

Error code F70. I have turned off the circuit breaker, then turned it back on; it drained but then kept cycling, so I turned off the circuit breaker again.


To reset that you would need to unhook the power for at least 30 minutes to the machine. this should solve the problem although it may happen. it is likely a faulty computer control unit. if the machine is still under warrenty i suggest contacting ... Miele Optima G2470SCVi Built-in Dishwasher

F1 problem It turns itself on and keeps going. Every time I turn it off it turns itself on again


Control board or temp sensor is bad ... Fisher and Paykel 24 in. DD-602 Built-in Dishwasher

Heater won't turn off I can't get the heater to turn off. Cycle is stalled and won't turn off. I have tried resetting it on the panel, to no avail. Afraid the house will burn down.


If the unit is stuck on the wash cycle and when you open the door heat pours out then its a thermostat faulty not allowing the cycle to continue when the correct temperature is reached.. ... GE Nautilus 24" Built-in Dishwasher

Dishwasher GSD2030F03WWSA735136B Model Series number;Piece fell off inside front panel, making it impossible to turn on dishwasher at all..so I took off front panel screws, opened dishwasher and saw white plastic piece but can't find where it goes but it must have something to do with turning the knob to start dishwasher because the knob won't turn now..so it must attach inside somehow but I can't figure out where it goes...help!!


I think you need to get a new knob, write down the model number and make and take the pieces to your local domestic appliance supplier, there might be something similar in stock. Now I do mean the kind of small supplier that understands this kind of ... Dishwashers

Dishwasher (Model # SHU6806UC), unit is about 8 years old, very light use, less than once a month, and no previous problems. Turned on unit and after about 10 minutes, I found water on floor coming from dishwasher. Turned unit off and turned off water shut-off valve. Removed dishwasher from cabinet. Found mice had chewed a hole in water discharge hose under unit, inspected all hoses, and found another hole chewed in the 13" flex hose in the front of the unit. Also found the float chewed to alm


Hi,\015\012 Check the valve is open where the supply gets its water from the sink supply.There is a garden hose type swivel adapter after the valve, Close the valve tightly and then unscrew that hose coupling and see if the hose is full of w ... Bosch 24 in. SHU6802UC / SHU6806UC Built-in Dishwasher

Maytag dishwaher mdb7130awb lower spray bar does not turn when running. I can turn it by hand but it hangs up about every half turn


... Maytag MDB7100AWB Dishwasher

I have a Viking dishwasher. Type DW 20.3 120v fac. 1300w 60 Hz. It turns on and within a minute or so it turns off. There is water at the basin. It doesn't seem to be draining but it turns itself off. What do I do? Thanks in advance.


... Viking Dishwashers

When I turn on the power washer, it turns on but it shuts back down. It sounds like it wants to turn on but it doesnt.PLease help. Its my friends powerwasher he uses at work. I cant get the exact model.


Some washers turn themselves off when low on oil, check the oil level ... Pressure Washers

Bosch Integra 500 dishwasher turns on and starts wash cycle, turns off after 90 seconds and then there is no power on the button panel at all. The dishwasher is full of water. Now the unit will not turn on or off. There is power to the outlet the dishwasher is plugged into.


Your controlboard is no good. find out if its a recall unit go to thermador.com which is the company that owns bosch and they can tell you the price if you have to oreder it or if its free for part and you pay labor to install ... Bosch Integra® 500 SHX46A0 Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0398 seconds