Having problems with your Karcher K2.26 Electric Power Washer ?

I need help re-attaching my choke lever for a Excell VR2522 Pressure Wasker. The choke lever has become un-attached and I need a visual presentation of what it should be attached to.


Answers :

Yourpressurewasher.com/vr2522_2.html\015\012\015\012\015\012ppe-pressure-washer-parts.com/excell-vr2522-replacement-parts-pump\015\012these links would be much useful to u
Hello sir, that is a on going problem with power washers the pump not\015\012working, than works sporadically. the main cause is leaving the\015\012pressure hose hooked up to the machine over a long period of ,not\015\012draining hose & machine, in the winter time the hose & pump\015\012willfreeze causing hose & pump to expand and burst. build up of\015\012calcium deposits from hard water clogging up pump nozzle,valves in the\015\012gun handle,clogging hose fittings and screens.one of these has to be\015\012your problem.you can find a parts brake down at KARCHER.COM.orRJ\015\012BOWERS.COM . and manuals,these are good info,sites,hope this helps,
Repair Help & Product Troubleshooting for Karcher K2.26 Electric Power Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need help re-attaching my choke lever for a Excell VR2522 Pressure Wasker. The choke lever has become un-attached and I need a visual presentation of what it should be attached to.


Yourpressurewasher.com/vr2522_2.html\015\012\015\012\015\012ppe-pressure-washer-parts.com/excell-vr2522-replacement-parts-pump\015\012these links would be much useful to u ... Karcher K2.26 Electric Power Washer

I have a coleman powermate pw0912500 pressure washer and cannot determine if there is a choke. Also need to know what the right side oil reservoir is for. Also need basic starting procedure instructions. What are two front sliding levers.


... Coleman Pressure Washer PW0881800

I need to replace the lifter in my dishwasher. I have the new part, but darned if I can figure out how it's attached to the pumphousing. I just need a diagram to show it connects to the drain valve lever and then to the pump housing. Maytag PDB2430AWE.


... Dishwashers

My pressure washer doesn't start/work when I attach my wand to the trigger. It works fine when I take it off, but there is no pressure, just normal water coming out. I'm thinking I may need a replacement wand?


... McCulloch FH160G Pressure Washer

The upper spray arm on our dishwasher has become detached from the back of the machine, and there is no obvious means of reattaching it. Are there some clips perhaps that have snapped on the part which attaches to the back wall of the d/washer (part number PP-TD20 - it's a 4 by 1 1/2 inch long rectangular shape with rounded ends) or does this piece somehow need to be taken apart (how - i can't see how i might do this?) and the transparent 2nd layer underneath get attached first? Thanks, Sarah.


What exactly the brand / model of your unit.?Let me know.Thanks ... Dishwashers

I have a union power pressure washer it runs for 10 minutes and then cuts off and wont work again, it still needs the choke on when the engine is warm and only runs for a few seconds


"it still needs the choke on when the engine is warm and only runs for a few seconds"This sounds like a fuel problem such as the carb needs cleaning ... Pressure Washers

Choke throttle not connected, need diagram - Karcher FactoryReconditioned 2000 PSI 20 GPM Gas Pressure Washer G 2000


... Karcher FactoryReconditioned 2000 PSI 20 GPM Gas Pressure Washer G 2000

PCP2100F What do I need to connect my hose to the pressure washer unit? My standard hose attachments are too small...


... Pressure Washers

The hose is leaking and I need another bottle that is Attached to the system.Model # 1210 Coleman Pressure Washer , it is an electric one. ''Clean Machine''


... Coleman Pressure Washer PW0881800

RY80940 The valve under the pump is leaking. I think it is a pressure release valve but I am not sure. I tightened it when I had to re attach two bolts that were holding the motor on the metal case then it worked for awhile then it started to leak and I lost all power. Should I tighten or loosen it or is there a washer that needs to be replaced?


... Pressure Washers

I need a replacement attachments for parkside pressure washer


... Pressure Washers

Wont start I have a North Star pressure washer that has been in storage for three years.It has the Honda motor GX 160 5.5 I put in new gas changed the oil, air filter,and spark plug.But it wont kick over. Im not sure how to work the levers upon starting it.Theres one for gas, choke,idle,and of course an on switch.Please help


Tip a cap full of fuel in top of the carb to start intitially, check for spark as common fault is on/off switch, If no spark, link the 2 wires on on/off switch together. ... Pressure Washers

I have a Kew Hobby pressure washer and need a new lance which attaches to the gun.


... Karcher PSI Electric Pressure Washer

I need an operations manual for my PWH 2500 Pressure Wave


... Honda 2500 PSI Gas Pressure Washer

2000 epw Northstar Item # 157942E 230v 2000 psi 3.5 gal/min #5 nozzle Problem: No pressure. Motor running...seems to be in bypass. Checked starter...but not finding power to the pressure regulator. May need a new starter/relay/contactor. Was working fine..May wish to order a starter and a possibly a pressure regulator...I have photo's of the complete set up if needed. Need to know part numbers to order and what company to order from. Thanks, Greg Scott


... North Star Stainless Steel Under Car Cleaner 16in

I have a power washer that needs a wand for the high pressure, the low pressure wand is part number PA6630GF. I need the part number and where tp urchase the high pressure wand.


... McCulloch FHH18A Electric Pressure Washer

I have a 5HP Honda engine installed on a Excell pressure washer. While the engine readily starts, it will not continue to run unless I keep the choke setting nearly completely closed. When I activate the pressure gun, it seems to generate adequate pressure, however, when the trigger is released, the engine continues to run at the same rpm instead of the normal variable rpm that most engines operate at during idling periods. The engine will always cease running when I push the choke rod all the w


... Honda Pressure Washers

Low Pressure with no hose attached, pressure is good, attach hose without wand and pressure drops 50%. Have had pump apart 10 times, have checked bypass valve, have even removed bypass and filled passage way so water could not bypass wihout any change. Am down to thinking pump casting is cracked allowing bypassing to happen. Does each of the three piston chambers have a check valve so one piston is not pumping back into another piston chamber?


I worked at a tool rental while attending college and had the opportunity to work on a variety of pressure washers, however, they were of the commercial type. Commercial washers are slightly different in that they usually have seperated components fo ... Karcher 2500 PSI Pressure Washer

Quantum Gold Sear pressure washer engine won't hold just spark even choke in full. What is solution


... Pressure Washers

Hose (High Pressure) (not inlet or outlet hoses)coming from inside the pressure washer has a hole in it. Needs replaced. Is this a part than can be easily replaced or does a new hose need to be made?


... Honda Black Max 3000 Psi Pressure Washer

I just bought a Dirt Devil Pressure Flex 1600 Power washer but the instructions are horrible. I'm trying to find a manual that indicates how the detergent bottle attaches. I attached it like it looked like it should go but it basically dribbled out with no pressure.


... Pressure Washers

When the patio cleaner is attached,the Karcher 5.68 pressure washer now keeps stopping and starting.It works fine on high pressure lance.It worked fine when bought from new a few days ago. We tried attaching the patio cleaner head to a larger machine with the same results.


... Karcher Pressure Washers

My pressure washer is 3 years old, never had a problem with it until now. It runs for 2 seconds only on choke. It will not start or turnover at all with out the choke on. Please help, I miss my pressure washer. Thanks Andrea M. Conzet


It sounds like could be one of the problems listed below or a combination of those things.1) The exhaust is partially blocked. Check the screen covering exhaust port for carbon and dirt build-up. High-speed exhaust air must pass freely. W ... Honda Black Max 2600 PSI Pressure Washer

Pressure Once I have the powerwasher started and going (water to it before starting) i can't get it to go to full pressure it will prime up like it's going to go to full pressure give me just a shot of full pressure then go back down to probably half pressure and remain there then prime again for a second then back a coninues cycle! Maybe there's a seal or something somewhere I should look at. Hose and pressure from house is good, the seal whee the hose attaches to the bottom of the washer is ne


This is usually a problem with the "dump valve" defective in not being able to hold the pressure but only able to release it prematurely as it should only do so when to much pressur is built up inline. Only recommend qualified pump tech. But check pu ... Coleman Pressure Washers

I have a Karcher K2.65 Deluxe pressure washer. All connected up, turned it on but I have low pressure out of any of the attachments and water splashing out of connection between gun and extension tube


... Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1139 seconds