Having problems with your Karcher K2.26 Electric Power Washer ?

Trigger gun I just install a new hose for my Karcher 330?Hose is working, but the trigger gun is lose, no turn off went is released, the equipment is always on ?..did I missing a part inside the gun ?..


Answers :

It sounds like you left out the spring in the hose.
There are about 10 different models of K330 with several types of guns. Go here and search until you find the correct gun so you can see the diagram. I think it will be hard to buy a replacement spring, though.
Repair Help & Product Troubleshooting for Karcher K2.26 Electric Power Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Trigger gun I just install a new hose for my Karcher 330?Hose is working, but the trigger gun is lose, no turn off went is released, the equipment is always on ?..did I missing a part inside the gun ?..


It sounds like you left out the spring in the hose.There are about 10 different models of K330 with several types of guns. Go here and search until you find ... Karcher K2.26 Electric Power Washer

Water is leaking from inside the pump and i see no damaged plastic from the outside.the motor keeps on even after i release the pressure gun and most of all ther is no or less pressure when i trigger the pressure gun.please can you suggest what parts do i have to change for it to be fixed 10x


Hello. The internal seals need to be replaced. Obtain the Karcher rebuild kit I got from pressureparts.com\015\012 \015\012J. ... Karcher Quick Connect Nozzle Set

Karcher engine still run's when gun trigger is released, as if the trigger is help down. Model K2.080


... Honda Karcher G2400HH-R Pressure Washer

I have a Karcher K3.99M when it is turned on and nozzle (trigger) is depressed nothing happens but after playing around with the nozzle trigger it comes on and as along as the trigger is depressed it will run, once you release it will stop and you will have to play with the trigger to get it active again. It sometimes hums even if the trigger is not depressed, please can some address this situation and identify what part is required?


... Alfred Karcher K 5.93 M Electric Pressure Washer

We have a Karcher G2500VH pressure washer. If you start the engine with the trigger pulled on the spray wand it will run at full pressure until you release the trigger. after that, when you pull the trigger it will not have any more pressure than the water hose feeding it. Does it have an internal unloader valve? What is the part number?


Hi, Karcher calls the unloader valve a spill valve, this is a link to a full drawing/parts listing , and your fault description might well be a sticking /seized unloader(spill ) valve hope this helps ... Karcher 2500 PSI Pressure Washer

Trigger gun for gas Karcher pressure washer is missing spring or whatever allows the trigger to work...can anyone help with parts advice?


... Pressure Washers

Karcher 720 mxs fit dirt blaster to gun press trigger pressure low release trigger motor carries on running


... Pressure Washers

When I switch my karcher k4.97 washer on it just sits and pulsates(on off on off etc.)When I squeeze the trigger it runs perfect,but emits a very low pressure.Then when I release the trigger it reverts back to pulsating. I have tried the popular fixes like cleaning lances,filters,making sure its not airlocked etc.I have even fitted new parts(seals to the pump etc).There are no leaks what so ever.


You have an internal crack in the out let head of the machine very comon in thease machine and not expencive to fix ... Alfred Karcher K 5.93 M Electric Pressure Washer

Deville Excel Model # EXHA2425 Pressure washer I have a deville excel Model # EXHA2425 pressure washer. I went to the deville website (devap.com) which forwarded me to the dewalt site w/ exploded diagram below. I am having problems with intermittent pressure production. If I squeeze the trigger sometimes it will have pressure, somethings it will not. If I repeatedly squeeze, then release the trigger sooner or later I will get pressure. Someone on hear had told me it was a "bypass valve sticki


You\015\012need toput antifreeze in the out/outlet or/oil then start it up you are driing out the seals allways put away with repeating this step ... Karcher 2500 PSI Pressure Washer

Deville Excel Model # EXHA2425 Pressure washer. Is "unloader" the same as "bypass valve"? I have a deville excel Model # EXHA2425 pressure washer with a 5.0 Honda enginr. I went to the deville website (devap.com) which forwarded me to the dewalt site w/ exploded diagram below. I am having problems with intermittent pressure production. If I squeeze the trigger sometimes it will have pressure, somethings it will not. If I repeatedly squeeze, then release the trigger sooner or later I will get p


... Pressure Washers

Pressure problem HI, I have very little pressure at the gun end. I have pleanty of water to supply the machine. When I release the trigger it kicks back and forth.


Sorry i am not the one who gave you info from before. but from what you say your problem is water supply. if you don;t have enough to feed the pump it will cavatate. and that is why it surges the way it does. ... Karcher 2500 PSI Pressure Washer

Engine stalls out when I release the gun trigger.


... Craftsman 2600 PSI Honda Powered Pressure Washer

Nilfisk Alto Active Waterblaster.Starts up good. When I release trigger on gun it does not start pressure again. I have to take water hose off


... Pressure Washers

Gun locked in on position, will not shut off water when trigger released


... Briggs & Stratton Briggs Stratton Pro Style Pressure Washer Gun Generac

When gun trigger is released the pump stays loaded and will not recirculate the water


You need to locate the bypass valve and lube it ... Northstar Pressure Washers

It takes some time for the pressure to build up in the discharge gun and seems to take longer each time after I release the trigger and then start to spray again


... Pressure Washers

I have a 5HP Honda engine installed on a Excell pressure washer. While the engine readily starts, it will not continue to run unless I keep the choke setting nearly completely closed. When I activate the pressure gun, it seems to generate adequate pressure, however, when the trigger is released, the engine continues to run at the same rpm instead of the normal variable rpm that most engines operate at during idling periods. The engine will always cease running when I push the choke rod all the w


... Honda Pressure Washers

North star petrol pressure washer. working fine, then no high pressure, checked water feed, water filter , pressure relief valve and gun nosall well work sometimes and keep working, when you release the trigger and try in again the pressure gone again. please help, many thanks, richard


Sounds like the regulator is sticking or is airbound. loosen the water connection and then tighten it back. Could also be that the trigger gun is faulty or needs adjustment. Hope this helped ... Karcher 2500 PSI Pressure Washer

G2600VH...my washer seems to be locked up with pressure which is locking the flywheel. The gun trigger no longer releases the water pressure, and I don't know how to safely relieve the pressure. I


Your pressure washer is equipped with a "unloader valve". This is the device that routes the water into a by-pass loop when you release the trigger. Something has gone wrong inside causing the valve to not spring into the unload position. You can ... Karcher G 2600 VH Gas Pressure Washer

Lack of pressure after releasing the trigger on the wand


Hello awcockerill:This sounds like the bypass (unloader) valve is sticking. Here is a diagram of your machine's pump. On page 2. ... Karcher 2500 PSI Pressure Washer

I really appreciate the help and the information I have read so far. My Karcher K2400HH runs like heck until you release the trigger. Then, if I take the quick-connect nozzle off, pull the trigger and shoot a stream of water, I can then put the nozzle back on and it runs like heck again UNTIL I release the trigger. Then, it is the same process each time I release the trigger. Kind of frustrating.


Your unloader valve is sticking, take a look at the attached link for information on how to repair the problem. ... Karcher 2500 PSI Pressure Washer

Turn water on then actuate wand trigger. Pressure washer leaks when wand trigger is actuated and has very low pressure/flow output. After releasing trigger the pressure cycles on - off at approx 1 second interval. I suspect that the plasstic oulet tube is leaking causing low pressure leak out of bottom when trigger is actuated and causes pressure switch to cycle when the trigger is released. Any Help? This pressure washer is approx 18 months old!


You gave a very close solution yourself for the problem. But other leakages can cause such symtoms.Forexample a leaking head or a leaking chemical inlet. These can be caused because the spill valve (pressure control valve) is stuck. When this valve s ... Karcher PSI Electric Pressure Washer

I have a McCulloch FH160B power washer and it no longer builds up pressure. I haven't used this very much at all. I tore it apart and cleaned everything I could find. When i pull the trigger for the spray nozzle, I get line water pressure. When I release the trigger, the power washer sounds like it starts to build up pressure. When this was working correctly, the pump would shut off when the trigger was released. Any suggestions?


... McCulloch Pressure Washers

Hi, purchased 1 year ago from menards a apache 2600 psi gun and less than 5 uses now the gun trigger is broken, and water is comming out of the trigger?


... Apache Universal by 2600 PSI Pressure Washer Gun Kit

When dishwasher drains the water not all the water is drained. Some stays standing at the bottom and starts getting an odor after awhile. This is a replacement dishwasher in a 35 year old house. How important is the air release part in the draining situation? I was told by someone that the newer dishwashers have the air release part which was not hooked up on this dishwasher when installed last year. Are there some other possibilities of things that can be checked. Model Number is DU


... Whirlpool DU1055XTS Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0798 seconds