Having problems with your Karcher K2.26 Electric Power Washer ?

My Karcher (K2.26M) pressure washer is leaking water from the ON/OFF switch and the bottom. Does anyone know what could have broken, and what part I would need to fix it?


Answers :

I have had a dozen of these units, My advice is not to bother trying to get parts or fix it. Its designed to be a throw away unit!
Repair Help & Product Troubleshooting for Karcher K2.26 Electric Power Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Karcher (K2.26M) pressure washer is leaking water from the ON/OFF switch and the bottom. Does anyone know what could have broken, and what part I would need to fix it?


I have had a dozen of these units, My advice is not to bother trying to get parts or fix it. Its designed to be a throw away unit! ... Karcher K2.26 Electric Power Washer

I have a frigidaire 640 series dishwasher, P/N 154374101. I need to know how to hook up new latch wires (plug on). part number is 5304442152. If you could help that would be great.


... Frigidaire Dishwashers

I have an Electrolux dishwasher model DX102SJ*02. One of the roller assemblies that hold the top tray on the rails has broken causing the tray to droop. I would like to know what part number I need and where I can get it. I live in Darwin NT, Australia.


Sir/mam\015\012\015\012\015\012 try www.partnship.com.au ... Dishwashers

Broken door spring /ordered parts, need to know how to fix


Hello :)What you need to do is pull the unit out first and then look at the side that isn't broken, since there's 2 springs and a string on each side, and put it on exactly the way the side that isn't broken is. When pulling the unit out, ... Dishwashers

I have an old Bauknecht dishwasher GSF 3160 S that a friend gave us 10 years ago. It was stored for that time, and now if I try to use it, it leaks out through the bottom and floods the kitchen. I would like to know 1) is it worth fixing from the point of view of how energy/water efficient (or inefficient) an old dishwasher is - if you know the specs for this particular machine, and 2) what needs to be changed if it is worthwhile fixing. I don't know what else might not work, because I only pu


... Bauknecht Dishwashers

Parts needed I need an outlet pipe Part# V24A000Q8 and four brackets Part# V13A000A9 for a Equator model #SB-72/1 dishwasher. Any place where I can find them. Equator is out of stock and it could take 6 weeks to order. I would appreciate any help you can give me! Thanks, Pearl


If the manufacturer is out of stock...chances are you will not be able to find them anywhere else. Your best bet would be to go to a metal machinist shop and have some custom made. You can have this done for the pipe as well. ... Equator SB72 Built-in Dishwasher

I need a small part for the bottom washing arm to attach it to the arm. It is a small round grey plastic part. I have emailed ASKo and not gotten a reply. Does anyone know where I can get parts for


... Asko 24 in. D3350 Dishwasher

I need to remove a broken heating element from my Whirlpool dishwasher and install the replacement part. I was hoping it would just "pop" out and the new piece would push in, however, it seems that it is not that simple. I need instructions.


Depend on how the heating element goes through the tub you do have to go underneath (if it goes down through the tub in the front) or even remove the dishwasher from the cabinet (if it does it on the back of the dishwasher). The tub is made of ... Whirlpool GU1200XTLS Stainless Steel Dishwasher

I HAVE A CEAN MACHINE 1210 COLEMAN POWERMATE MODEL # pwo701210 MY PROBLEM IS THE SPRAYER HOSE TO THE PUMP DICONNECTED FROM THE PRESSURE OF THE MACHINE I FOUND 2 PARTS A SPRING AND A LIL BRASS PIECE THAT CAME FROM INSIDE THE ADAPTER NEED TO KNOW IF THERES ANY OTHER PIECES MISSING MAYBE A LITTLE DIAGRAM WOULD HELP SO I WILL KNOW WHAT I NEED PLZ HELP !!!!


Need a repair manual where can I find it ... Pressure Washers

Hello, I have a Fisher Paykel Double dishwasher (DD-603) - about five years old and then top unit is literally going nuts. It turns itself off and on, beeps constantly, and will not run through a cycle. What is causing this issue and how can I go about fixing this problem?. What parts do I need to buy? How do I remove the front panel of the dishdrawer to fix this problem? Do it yourself repair instructions would be terrific.


It sounds like it needs a new computer board (the whole thing) so you cant do it yourself it needs to be orded in. \015\012\015\012If you have any questions please dont hesitate to ask ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I need to replace the detergent dispenser as the door is broken. I have the new part but do not know how to remove the old part


... GE 24 in. PDW7880JSS Built-in Dishwasher

I am in Hong Kong and have a Zanussi dishwater. It is broken and I would like to get it fixed. I can't find anyone to fix it. Can you point me in the right direction? Thanks, Dodie


... Zanussi Dishwashers

E3 Error Hi My dishwasher is showing error E3, which the user manual states "The appliance is not able to pump out the water.", however, other E3 error states a heating issue. The dishwasher does in fact heat the water but generates the E3 error after 10 minutes or so, then pumps out the water from the dishwasher. I'm a little confused as to what the issue is here and what part I would need to rectify the problem. Any advise you could give would be greatly appreciated. Kind regards


The E3 error is a result of water temperature not getting to a nominal value within a particular time. This could be caused by several factors like heater faulty, wash pump not working well, wash arms not circulating water as required. Need model nu ... Smeg Dishwashers

I have a Dishlex Glendale Deluxe and need a new seal for the bottom of the door. I cannot find what model number it is to source the part. Do you know what the part no. or model no. would be?


I have a Dishlex Glendale dishwasher and the model no is 10014380092 if that helps you. ... Dishwashers

MY Roper WU0800x1 dishwasher does not spin the washing arm. In fact, water just bubbles from the center. I don't know if I need a new water pump or if there are parts missing; the unit was in my RV when I purchased it used. Does anyone have a schematic of the internal parts?


... Roper 24 in. RUD1000DB Built-in Dishwasher

Need a part #8564929 which is the plastic rinse aid knob that fell off during a cycle and melted. kitchenaid wants $37.76 with tax and shipping for this this little plasticpart. rip off. anyone know where i can get a better deal for this part? the model # is KUDS02FRSS1 (stainless Stell) kitchen Aid dishwasher.


... KitchenAid 24 in. KUDS02FRSS Stainless Steel Built-in Dishwasher

It went thru the whole cycle and when I opened it up - there was water still left in the bottom - hit the cancel/drain button and nothing happened. Unhooked the drain line to the drain pipe under the sink and no water came out. How do I find out if it is the pump ? If I take it out - what do I need to look for and what trouble shoot things do I need to know. I live about one hour from the nearest town - so I would like to find out the problem - before I call a repairman and maybe fix it myse


... Kenmore 24 in. 17462 / 17464 / 17469 Built-in Dishwasher

Bosch dishwasher the string on the door tensioner has broken I have the new part but dont know how to got out the lower part. Do I have to take off the hole door or is there an easy way to change it? It seems odd that as its string and must be prone to breaking that there is not a simple way to fix it.


You have to remove the entire dishwasher from under the counter. Then locate the broken cable. There is a panel you need to remove to access it. It attaches to a spring which goes to the underside of the dishwasher. Not an easy repair. Need alot ... LG 24 in. LDF 7811 Built-in Dishwasher

We just bought this dishwasher. The instructions say it doesn't need to be anchored and it doesn't come with the clips you usually see for dishwashers that need to screwed into the frame (or have a place where such clips could be attached). That said, the dishwasher completely tilts forward when the top rack is loaded, so something is definitely not right. Has anyone had this problem and/or know how to resolve? Thanks.


... Maytag MDBH985AWW 24 in. Built-in Dishwasher

Broken fitting The plastic curved piece that attaches the hose to the white fitting on the back of the dishwasher broke, and I need a replacement.  I have been to Home Depot and they don't have anything to fit it, and I was told to go back to the manufacturer for a replacement piece but have looked online and can't find anything that would allow me to order the part.  Help!??


You don't have to change that piece,just tie the hose (drain hose ) to something that is equal height,this prevents siphoning. Please Rate This ! ... Danby 22 in. DDW396 Free-standing Dishwasher

The knob which holds down the bottom spary bar has broken. It is plastic and I see the previous owner has "glued" it down. We have been in the house for six months. The model number is KUD124SEBLO F. Do you know where we could get the part. We live on Vancouver Island Canada


You might try www.firstsourcesupplyco.com for that particular part It can be shipped to you if needed\015\012\015\012Good luck Hope this helped\015\0 ... Dishwashers

I am a De Dietrich user in Ireland and i would like to know where i could buy spare parts or can i buy them online


... De Dietrich Dishwashers

We have a leak on the pump around the manafold and the gearbox. Has anyone had this problem that you know of? Could it be that the packing has gone out? The washer is 2 to 3 years old and runs great just need to repair this problem to put it back into service.


Usually when water is leaking from in between the manifold and the oil side of the pump, the high and low pressure seals (a.k.a. packings) are worn out. ... Northstar Pressure Washer 3000 PSI

Blinking lights I have a built in Kenmore 15632 dish washer it has been stopping throught the cycle and the lights will flash on it what could couse this to hapen and what part will i need to fix it


Next time this happens, try pushing in the door handle. If it starts up again, the computer thinks the door is ajar, and it won't run. You'll need the door latch assembly w/ door switches.\015\012\015\012Good luck! ... Kenmore 15632 Built-in Dishwasher

I have a Maytag DWU8250BAX and the thing leaks like crazy. I just replaced the door gasket, but that is not the problem. When I took a closer look at the door it seems as though the water is getting up and into the door through a space in the bottom of the door. It seems to me like there should be another door seal to fill a gap that sits between the door hinges. If anyone knows if there should be a seal here and then what the part number might be that would be great. Thanks!


There is an airgap under the door..it should spray up and run down the door not spray up under it..look for crack or hole in spray arm..if there is the wrong soap in it it will flood out with lots of bubbles..just have to flush it out. lastly, if you ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1385 seconds