Having problems with your Karcher K2.26 Electric Power Washer ?

Karcher K2.900M spray gun leaks. Not sure which replacement gun to get or if there is anyway to fix it. Thanks


Answers :

We have found a better designed universal replacement gun/wand for electric power washers: http://electricreplacementgun.blogspot.com/
Www.pressure-washer-parts.com has many parts available. There are complete guns, and gun repair parts listed here.
Repair Help & Product Troubleshooting for Karcher K2.26 Electric Power Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Karcher K2.900M spray gun leaks. Not sure which replacement gun to get or if there is anyway to fix it. Thanks


We have found a better designed universal replacement gun/wand for electric power washers: http://electricreplacementgun.blogspot.com/ ... Karcher K2.26 Electric Power Washer

My Karcher 411A seems to have lost pressure. Behaviour is this, when you press the water release on the spray gun you get 100% pressure for like 10 seconds and then it seems to dwindle down to 30-40% of its total pressure. When the pressure cuts down I can hear more noise coming from the gun sprayer aswell. So not sure if the problem is in the gun or the main pump unit ?


Sounds more like a clog on the intake side. Check the filter and the hose on that side. ... Pressure Washers

If my dishwasher is not getting water in and it is over 15 yrs old, is it smarter to replace it or should I go to expense of getting it fixed? I am not sure what the cause is, but I do know it is not getting water.


If it is only water inlet screen for the input of water or the input automated valve I would question keeping it. Sometimes it is better to invest in a quick fix. \015\012\015\012This gives you time to buy what you want . Insted of reacti ... Dishwashers

I recently purchased a Dewalt DXPW 3835 Pressure Washer from Home Depot.... After 4 hours use I no longer get any pressure. After depressing the trigger, I get a second of pressure and then it just dies. I called DeWalt and they couldn't help and to take it to the Warranty Shop. They informed that they wouldn't be able to look at for 2 weeks so I took it back to HD and got a new one and this one does the same thing. I'm pretty sure it's probably a pretty quick fix but no one seems able to te


... Dewalt DXPW3835 - 3800 PSI Professional Gas-Cold Water Pressure

Hello - our GE triton dishwasher door latch will no longer ''latch''. It gets stuck about 1/4 of the way. I took off the panel and looked at the latch. Seems one piece of it gets ''stuck'' with another lever. Not sure how to fix it?


I am not familier with the Triton however on many under counter dishmachines with a front door such as the CMA L1X one or both latch or catch is bolted or screwed to the frame in a manner that can be adjusted by loosening the fasteners and realigning ... GE Dishwashers

Bosch SHE44c getting a E6 code????Just finished E1 code by re-soldering the board and the first wash after fixing that error, I get an E6 code and it did not drain. During the repair of E1 code, I cleaned all hoses out and made sure I had no problems...What is the troubleshoot to search for E6 code?


Thanks, that perfectly nailed my problem. Bad / burnt solder joint on a SHX45P05UC/57 model. A little solder, and it may last a while. But next it fails that way I can order the motherboard without even opening it up. ... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

Detergent holder we have a electrolux dx303 and where we put the tablet in it keeps popping open during the wash and the tablet ends up on the bottom of the dishwasher. i'm not actually sure if this is even meant to do i'm asuming not. just wondering if it is meant to and if it isn't then i guess we get someone to fix it! Thanks Barb


... Electrolux Dishwashers

I have a Twenty-Eight Hundred dishwasher that is giving me a constant Blocked Wash Arm error. I've reached in and freed it, made sure it was as free as possible - have only stopped short of physically crawling into the dishwasher to fix it. I can't get it to work, despite nothing really blocking. Can someone help me out?


... GE Dishwashers

Bosch SMS4012 - E-NRSmS4012AU/11 FD7309041276not sure of its age but this dishwasher wont commence its cycle when I turn the left dial (but If I hold the handle latch up, it starts) there is no error code facility on this unit. Would it be worthwhile getting a technician to fix it or should i just buy a new one !! Thank you - Rena.


... Bosch Dishwashers

The engine will start but I'm not getting enough pressure when I press the the sprayer gun. Water is coming out but no pressure. Not sure what to do.


This can be caused by three different components. Either your unloader valve has failed, your valves have stuck open in the head of the pump or your water seals are worn. If you get an initial jolt of pressure when you squeeze the trigger then we kno ... Karcher 2500 PSI Pressure Washer

I need to know how to fix my dishwasher. It's a portable Maytag. older. Not sure how old. It will fill up with water and heat it up, but it gets stuck there and will not wash the dishes.


Hi.If the machine fills and heats up the water, but does not proceed any further in cycling , that means that the timer board did not detect that the correct temperature has been reached.The machine keeps heating or filling wa ... Dishwashers

Dishwasher problem It is a "classique" dishwasher , about 8 years old, but used only about 50 times max. The dishes are not getting out clean - the washing powder is smeared over them. Most of the dish washing powder (or tablet, tried it both) is not comming out of the powder compartment, despite the fact that we find the compartment open when the washing cycle is done. Sure it is just a "smal quick fix thing" but have not idea what it could be. Pleaseee help!


... Dishwashers

Bosch DW model SHU53A05UC/17 was working fine until yesterday evening. Went to turn it on and now get nothing. No lights, no power zip. It's on its own 20amp circuit. Checked the fuse and it's not blown. Flip the breaker on/off a few times anyway to make sure. I was installing a floor and used my miter saw on the sump pump circuit (diff from the DW circuit). It blew the fuse a few times. Any chance, on a diff circuit, it spiked and damaged a board in the DW? What part (part #) would


... Dishwashers

Hi: I have reviewed the forums and tried to fix this issue. Have a Miele G2120 dishwasher that at the end of the cycle - the three (rinsing, drying and end) orange lights begin blinking in harmony. I have removed the triple filter, and two plastic parts to the impeller and made sure all was free of obstruction. I then pulled it out removed the drain hose from in-sinkerator; removed the water line and checked for obstruction. When it gets into this condition - the majority of water drain


Hi The issue seems to be with the float switch assembly that is bad and should be replaced. Float assembly is found inside the dishwasher's tub, on the bottom. The water that ... Miele Inspira Series Dishwasher w/ 6 Programs and 5 Temperatures - G2120 / G2120BL - Blac 24 in. Built-in Dishwasher

F1 error in top drawer even after replacing circuit board in bottom of unit. Please note there was now water in the first place. Model DD603SS Not sure weather to get fixed or just buy different brand? Any help appretiated Gordon.


It would be helpful to know the reason why you changed the circuit board.\015\012\015\012Is the bottom drawer working ok now?\015\012\015\012There are several reasons for F1 to show up including the water flood at base.\ ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I had a draining problem, clogged line, fixed. Does the small in line rubber valve under the dishwasher in the transition piece to the hose have any real need to go back? and which direction it is cupped slightly. Also are there any assembly instructions? I cant seem to get it back quite right, or a white washer has split. not sure which.


... Whirlpool 24" Built-In Dishwasher - Black-on-Black

Mod. mdc5100aww ser. 28126829ax purchase date dec. 02 i called the serviceman he said the sprayers are pluged. i'm on a fixed income. with food house payment medicine dr. bills. i can't afford to get it fixed. i tried to get the bottom sprayer off. i could not get it off. now i have it unsnapped & can't get it back together. if you can help me i would appreciate it!!!!!!


... Maytag Dishwashers

Dishes not getting clean, not sure real sure if water is getting to all the dishes checked the spray arms to see if clogged but don't know how to check the pump like the manual suggest, how do I get to the pump, dishwasher is DU920PW


Try a dishwasher cleaning product. Relatively easy to check if the pump is working. Line up both the spray arms front to back and then run a sequence and see if the arms have moved. If they've moved the pump is working ... Whirlpool 24 in. DU920PW Built-In Dishwasher

Mod m.d.c.5100aww ser28126829ax I had a repairman come out. He said the "sprayers" are plugged. I'm on a fixed income. With my bills I can't afford to get it fixed. Trying to fix it myself. I have the bottom sprayer unsnapped & can't get it back on. Thank you Don


Most dishwashers dispense the detergent via gravity and the sprayer\015\012arms spraying against the soap dispenser once the little door flips\015\012open during the wash cycle. Since it sounds like the soap door is\015\012opening I would look at the ... Dishwashers

I keep getting an E1 error on my LG LD-2120W model dishwasher, can you advise what this means so l can either fix it or get it fixed. Thank you


Leakage Error E1\015\012\015\012\015\012\015\012\015\012The excessive RPM of Washing Motor happened during Washcycle due to water leakage.\015\012\015\012Water leakage in ... LG Dishwashers

My kenwood KDW12SL3A dishwasher dysplays E3 error every time I use it. dishes don't get cleaned properly. Can I fix it myself? if not how much will it cost me to get it fixed by a professional? thank you


Hi\015\012\015\012E3 error code neans the water is not being heated to the required temperature in the machine.\015\012\015\012This may be either a defective heating element or faulty thermostat.\015\012\015\012It ... Kenwood Dishwashers

Dishwasher I am getting a run around with getting my LG dishwasher fixed properly. We had a tech more than once come in and look at our dishwasher. It has not been fixed and never dried the dishes properly. It is now leaking and going to a "del" level when we attempt to wash the dishes. It is also leaking on our fairly new tiled floor and under our new kitchen cabinet. Your tech stated the dishwasher was not installed properly. The installation dept , Francine stated it is not their problem


Not sure what you mean by a "del" level, but as far a drying issues:\015\012\015\012LG chose to use a very energy efficient drying method which relies on the residual heat of the dishes to help dry them rather than many manufacturer ... LG LDF6810 Built-in Dishwasher

We came home from holidays a few years ago and the dishwasher (Westinghouse 905) just didn't turn on. We've tried it repeatedly since then and are unable to get it to turn on. The power point works for other appliances. Should we replace it or could someone fix it? And is it a plumber or electrician you get to fix dishwashers?


Appliances that sit without use, usually have more problems than just the original problem.\015\012\015\012In your case I would first check the power conection on the dishwasher. located under the machine\015\012\015\012If thi ... Dishwashers

Have a dd603 with an issue...took off the arm and the metal silver disk (the ones with holes) to get to the wash impeller-(the thing with blue blades) the wash impeller will not spin-which I think is part of my problem, since i looked at the lower drawer and was able to spin the blue blades easily...was also able to pull it right out. Cant pull out the upper wash impeller!!!! Really want to get this fixed before my husband gets home and I get the lecture about how I purchased a cool looking d


Lol I don't know a lot about dishwashers, just do him good and tell him afterwards, and then hire a mechanic to look at it.Why would you want to pull the propellers off anyway? The top one doesn't pull off because it's screwed on, and the botto ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I have a kitchen aid dishwasher. The upper spray arm is getting water and getting enough water pressure but wont seem to spin. Ive ran a lot of tests but nothing. ive cleaned out the spray arm and port that gets water to the spray arm. Cant seem to fix it. Any ideas?


Hi,When my wife started complaining about her dishwasher not getting the top rack clean this is what I found and I wrote a tip about it...Dishwasher Spray Arms not Spinning ... KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1212 seconds