Having problems with your Karcher K2.26 Electric Power Washer ?
Why wil the nozzle no longer stay in the handle ?it will not twist and lock
Probably the plastic handle is worn where the nozle fits and there is nothing to keep it locked.
Repair Help & Product Troubleshooting for Karcher K2.26 Electric Power Washer
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Why wil the nozzle no longer stay in the handle ?it will not twist and lock
Probably the plastic handle is worn where the nozle fits and there is nothing to keep it locked. ... Karcher K2.26 Electric Power Washer
I have a magtag quiet 100 series that has a broken handle but still shuts tight and seems to lock yet. Problem seems to be that the rinse only light will stay on for quite a long time and won't let me hit the wash button. When the rinse only light does go off, if I hit the wash button it starts but then switches to rinse only. Sometimes I can get lucky and get it to stay on wash after the rinse button is off for some time. Any suggestions?
... Maytag 24 in. DWD1500A Built-in Dishwasher
My built in dishwasher door will no longer stay part way open it went klunk when I left it barely open and now feels like it weights a ton. All the controls are on the to edge and it has a huge handle that goes acroos the whole front it is about 4-5 years old.
Hi there......you havent stated which tye or model your appliance is...however it sounds like your door spring /suspension cords or cable have broken....on some appliances their replacement is quite simple..however be warned other tyes are quite inv ... Kenmore Dishwashers
The washer doesn't spray hardly at all but instead leaks back thru the handle. if i pull the end nozzle and toggle the trigger i get splats of pressure. is there supposed to be an o-ring in the top half of the wand that twists off??
YES ... McCulloch FHH18A Electric Pressure Washer
How do I get the electronic lock to stay off I no longer have children in the house and cannot find the manual. Kind Regards Dave Cashin
Hello Dave,\015\012\015\012Welcome to FixYa.\015\012\015\012I may be able to help, but I would need you to post the make and model number before I could say for sure.\015\012\015\012The make is usually obvious, Kenmore, Whirlpool, GE, Bosch, Asko etc ... Dishwashers
I have a maytag quiet series 100 dishwasher and it will not run a lock light comes on and i have replace a broken handle assembly but light stays on
The control panel is locked. dont know your model number to tell you what buttons you hold to unlock it, but some models have a lock button you hold down for 3-5 seconds. other models just have a lock light, and have a line indicating 2 buttons that ... Dishwashers
The control lock light goes on as soon as I press the cycle to start the dishwasher. The dishwasher does not start, presumably because the control lock stays on. I do not know how to disable the control lock function. Pushing and holding the button for 3 seconds does not disable it.
Hello &\015\012Welcome to FixYa\015\012\015\012To unlock the\015\012controls press and hold the HEATED DRY button for 20seconds. If the problme\015\012returns then only option is touch pad replacement. Please get back t ... Maytag Dishwasher
Kenmore Ultra wash III will no longer stay connected to faucet after filling...what part should I replace the hose or the faucet adaptor? When we turn the faucet on to start up the dishwasher it falls off...when we finally get it to stay connected with water on...it will fill but then falls off again...get it to stay on, it empties, but then after it has completed filling up again it disconnects from the faucet.
If your adapter that hooks up to the faucet has 4 little white plastic jaws inside it then it can be rebuilt. there is a kit that replaces those 4 jaws, the spring, the attaching clip and the internal seal.. usually runs around 10 buks or so. if i wa ... Kenmore Dishwashers
Lock Control I don't have a manual for my dishwasher. The Lock button is on (top of dishwasher). I have pushed that top button for 3 seconds. The button on the top and the "L" then both blink. The button on the top then stays on and the "L" light goes off. Since I can't get the lock light to go off - - my dishwasher won't tun on. Thank you very much.
First try unplugging the washer from powerpoint for 30secs..this may disable lock.if not, some washers will still work on lock if you hold the buttons you need. for 5seconds. eg try starting washer as normal but hold the button for 5secs....(Ps you m ... Jenn-Air 24 in. JDB1050AW Free-standing Dishwasher
I have a stihl water blaster RE170. the nozzle (water comes out in a circle) not longer works effectively - most times coming out as a point rather than a circular fashion. Do i have to buy a new nozzle or is there something I can do to fix it?
... Pressure Washers
The lock on light wont go off. We can not start the dishwasher. We have tried holding the noheat option for several seconds and have turned off the circuit box for several minutes and neither one made the lock on light stay off.
That is the correct button to push to turn the control lock off. You can try to reset the control by removing power for two minutes. If the dishwasher is doing the same thing, most likely the touch pad has a shorted button or a bad connection on the ... Kenmore Dishwashers
I have a Bosch model Shv 4303 dishwasher with a cabinet face attached. The handle is loose and I need to know how to remove the cabinet face from the dishwasher to tighten/replace the handle. The original mounting/installations are no longer available.
... Bosch Dishwashers
Our Kitchenaid dishwasher model # KUDP021R will not start. We close door, select wash and press start. The control lock light at the top which is lit flashes a few times and then stays lit. Dishwasher remains silent. An aside which may be helpful is that the door has always seemed to be not quite straight...as though it had to warp a tiny bit to close and lock.
The problem you have already identified could be the door switch is not closing when you shut the door. Please confirm your dishwasher is KUDP02I (i and not 1).\015\012\015\012One way to check is find out the door switch on the door panel ... KitchenAid Dishwashers
My Kitchenaid KUDV24SE is locked closed and I can not get it open. It feels like the handle is broken and disengaged from the locking mechanism. How can I override and get the door open??
HiThanks for using FixYa. To start with if the door lock is stuck and wont unlock then you can pry it to open, and just don’t try too hard. The issue can be with the door latch that is stuck, to unlock ... KitchenAid 24 in. KUDS25SH Built-in Dishwasher
Have whirlpool gold dishwasher made in Mexico, the control lock light stays on, when i push it and hold it just blinks three times and then stays on steady and then does the same over and over, before it did this I noticed the lights for different cycles flashing randomly, and even pushing cancel button once in a while would start the machine up....I have tried to unplug the machine and then plug back in, but nothing is helping....any ideas??
... Whirlpool Dishwashers
My 20 year old dishwaher just broke its lock. Somehow it seized when I locked the door. My husband took it out but we still cannot open its door and take out the dishes. The handle fell out when he tried to open it. How can we access to open it?
YOU HAVE ELIMINATED THE EASY WAYS, ARE YOU PLANNING ON REPLACING IT OR REPAIR, IF REPAIR CALL A TECH. IF REPLACE, THE LOCK MECHANISM IS AT THE TOP CENTER OF BODY. ACCESS WOULD REQUIRE REMOVAL OF D/W, AND ASSOCIATED CLEAN UP OF THE WATER LEFT. JUST RE ... Dishwashers
DU943PWKSO DISHWASHER STOPPED WORKING, ELECTRICAL CURRENT TO PANEL...THE LOCK LIGHT COMES ON WHEN THE DOOR IS CLOSED AND LATCHED, BUT THE WASHER WON'T START WHEN ANY OF THE BUTTONS ARE PUSHED...THE LOCKED LIGHT JUST BLINKS A FEW TIMES AND THEN STAYS SOLID AGAIN. ANYTHING I CAN TRY?
Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. This issue can be either due to a faulty door latch or\015\012door lock switch which is not engaging its ... Whirlpool DU943PWK - Multiple Color Built-in Dishwasher
The doorlock light has been staying on for about a week although the dishwasher would still work. Now it will not do anything and the Lock on light is staying on except when the door is open. can you nhelp me. Thank you, Steve
1. Press the Heated Dry pad for three seconds.2. An indicator light next to the lock graphic willilluminate when the controls are locked.To Cancel:1. Press the Heated Dry pad for three seconds. ... Dishwashers
The key lock light stays on. I held the heated dry button for 4 seconds and the light still stays on. I think it may be the control board, but I am not sure. Can anyone help me please?
If the light is blinking, it is definately a stuck button and the console will need to be replaced. If it is on steady, it could be a console or control board problem. There are no troubleshooting tips to figure out which one is faulty, the manual sa ... Whirlpool GU2400XTP Built-in Dishwasher
Problem with door hinge. Door locks but falls to fully open position when not locked rather than staying ajar 6 inches. Dishwasher circa 10 years old - " Orbital System"
Look for a broken spring at the hinges. May need to remove the inner door panel. ... Dishwashers
Handle on bosch she66c02uc is locked, there is a small orange thing sticking out under the handle that didn't used to be there. if I move it to the right, the door opens reluctantly. how do I get rid of the orange thing and get the door to open easily again?
... Bosch 24 in. SHU53 Built-in Dishwasher
My dishwasher 'start" button won't kick in. The machine seems to think it isn't locked - light wont activate, but the door IS locked. I select the cycle and option, but when i push start, it won't stay, The "clean" button keeps flashing. This is 5 years old
Hi,How many Blinks are there?Is it 7 Clean Light Blinks?Let me know, so that we could proceed.Hope i helped you.Thanks for using ' Fixya ' and have a nice day!! ... Kenmore 24 in. 17032 Built-in Dishwasher
Can't start the dishwasher, lock button is lit up. Tried to hold down many buttons for 3-5 seconds, but lock button continues to stay lit up. Tried resetting the power to machine, but nothing changed. Please help.
Hello Albert, On the Jenn-Air dishwasher you have, you have to hold down the "Heated Dry" button for 3-5 seconds to unlock the control panel.\015\012\015\012This should unlock the controls so you can again use the dishwasher normally. ... Jenn-Air 24 in. JDB1090AWS Stainless Steel Built-in Dishwasher
G2600VH...my washer seems to be locked up with pressure which is locking the flywheel. The gun trigger no longer releases the water pressure, and I don't know how to safely relieve the pressure. I
Your pressure washer is equipped with a "unloader valve". This is the device that routes the water into a by-pass loop when you release the trigger. Something has gone wrong inside causing the valve to not spring into the unload position. You can ... Karcher G 2600 VH Gas Pressure Washer
Our Whirlpool ADP5966 is not washing properly: the dishes do not come out clean and the soap mainly stays in the dispenser although it opens normally. The quick wash cycle is hopeless now and the longer ones still not good. We have cleaned filters, soap dispenser etc but still the soap stays in dispenser often turning into a concrete like block. Thanks
Hi, \015\012\015\012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms online ... Whirlpool 24 in. ADP5966 Free-standing Dishwasher