Having problems with your Karcher K2.26 Electric Power Washer ?

Water coming from trigger handle - Karcher K2.26 Electric Power Washer


Answers :

Repair Help & Product Troubleshooting for Karcher K2.26 Electric Power Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Water coming from trigger handle - Karcher K2.26 Electric Power Washer


... Karcher K2.26 Electric Power Washer

I have a Karcher electric pressure washer. Little to no pressure. Water come out of the bottom of the handle around the trigger.


See www.pressureparts.com for karcher ... Karcher 2500 PSI Pressure Washer

Karcher 3100 pressure washer, motor runs fine but when I squeeze the trigger on handle, high pressure pump won't come on unless I remove tip and water is coming out of wand without restriction. Help anyone have any ideas? It did come on once but when I let go of trigger it wouldn't come back on.


... Alfred Karcher Quick Connect Nozzles 2600 3100 Psi 5 Pack

Karcher electric power washer. When I release the handle, the machine stops working and it won't restart at all. I've only used it 2x, but it shut down each time. Trigger handle won't work.


... Karcher K2.26 Electric Power Washer

Black and decker electric power washer nothing coming out of wand all water coming out trigger.


Either the pressure tip or wand are blocked or the valve in the trigger is broken. Remove the high pressure tip and either try another tip or pull the trigger without a tip on the wand to see if you have the same problem. If available, try another ... Pressure Washers

WATER COMING OUT AT BOTTOM OF WASHER - Karcher K2.26 Electric Power Washer


Dear Sir,\015\012In this case the seals surrounding the pistons (3 in number)..are faulty.\015\012You can open the cover first ( by using a TORX T15 screw driver). Start machine in this way with all attached...( never run a power washer ... Karcher K2.26 Electric Power Washer

Have water coming thro wand but no pressure - Karcher K2.26 Electric Power Washer


... Karcher K2.26 Electric Power Washer

I have a Craftsman power washer model 580 752020. When I start it up, turn on the switch the electric motor runs fine until I either close the trigger to the spray nozzle or press the trigger for power spray. The electric motor just shuts down, if I take my finger off the pressure and let the water run with no presssure the motor runs fine. My question is this. Is the capasitator on the electric motor the probable cause and is there a way to check out the capasitator to see if it is malfuncti


I doubt that it has anything to do with the capacitor on the motor. i think you are having a problem with the actual Motor Drive circuitry. What is happening is when you close the switch, this tells the Motor to "Ramp Up" to pump the water out, what ... Craftsman Pressure Washers

I have a Karcher Pessure Washer K-Series, K 3.96M. When I turn it to ON, the washer keep cutting out of power and I get not water in the handle, even thought we water is on etc....


Sounds like it could be just a blocked nozzle in the end of your lance. ... Pressure Washers

I have same problem with Chicago Electric # 47761 electric pressure washer as Aug 10 2010 writer had w/ Karcher 2500. Runs briefly then stops. Pressure is trapped in hose. I cleaned hose disassembled & greased valve in handle. No improvement. Problem appears to be premature wear of trigger cam in handle - both are plastic. Valve body is rigid nylon. Any thoughts??


... Pressure Washers

I have a Karcher Electric K3.68 MR Reconditioned pressure washer that I've had for about two years and used about three times. The model number on the tag is: 9.559-635.0 and the Serial number is 000863. The washer pulses when I'm not sqeezing the trigger, It no longer will dispense cleaner when I turn the washer head to that position and now there is water flowing out of the bottom of the unit.


... Karcher Pressure Washers

Water is coming out of the main body of my Karcher power washer. It seems difficult to take apart but I would try it if you think I could fix it.


... Pressure Washers

Power washer starts no problem but when turned on and activating the trigger on the pressure washer gun, water no longer comes out. The gun itself was replaced not long ago. What could be the cause?


The tip could be plugged up ... Honda Pressure Washers

Hi I have a karcher 2020b. When power is on it sounds like it is on... When I press the trigger almost no water comes out. When this happened unnoticed oil on the floor afterwards. I have cleaned the filter, the nozzle and flushed the water through to get rid of a possible air lock to no avail. It also smelt slightly of burning plastic - any help would be appreciated. Thanks


... Pressure Washers

Karcher k2.35 pressure washer, motor is running, water is flowing, but when you press the trigger only a fine jet of water comes out.


... Karcher Pressure Washers

Hi I have a brand new Honda Power washer GC 160,2600 psi 2.3 GPM my husband taught me how to use it last night and I think I have followed all of steps: 1. hose free of kinks 2. connected to machine 3. purged pw handle of air and made sure water from house coming through 4. pulled out choke 5. turned red button to "ON" position 5. pulled T handle enging starter and it sounds like it will start but doesnt what am I doing wrong??? yes it does have gas in the fuel tank.


... Karcher 2500 PSI Pressure Washer

Water leak inside pump on karcher 54005 - Karcher K2.26 Electric Power Washer


... Karcher K2.26 Electric Power Washer

I have a Karcher K2.26 1500PSI electric pressure washer and I cannot squeeze the trigger when the water is on. I have to relieve pressure on the line to the gun to be able to squeeze the trigger. I bought this reconditioned from CPO and they are no help, even though they said it was warranted for 30 days. Help!


... Karcher K2.26 Electric Power Washer

Shampoo will not come through - Karcher K2.26 Electric Power Washer


Try adjusting the nozzle to low pressure on the end of the lance ... Karcher K2.26 Electric Power Washer

Water is coming out of the soap suction hose - Karcher PSI Electric Pressure Washer


There should be a ball check valve in the soap suction hose lets soap in keep water out poke a paper clip in the hole a few times soap will build up there and make the ball valve leak ... Karcher PSI Electric Pressure Washer

Karcher K2.26M electric power washer leaks water around the on/off switch and around bottom of unit. low pressure.


Probably your seals are bad and they are leakyng ... Karcher K2.26 Electric Power Washer

I bought a honda pressure washer power boss 3000. I load the gasoline, start the machine, but pressure water is not coming out from the trigger. i tried so many things , but can t get started.


If you are using a water tank for water supply, remove the water supply line from the pressure washer and connect a water hose from a faucet. Turn the water on, then crank the engine. Pull the trigger of the spray gun until water comes out. When then ... Honda Pressure Washer PSI 3000

Karcher 3.86M Electric pressure washer. Plugged it into outlet. Unit started running. turned it to off position. Attached hose. Turned on water valve. Turned on switch. Squeezed trigger. Nothing happened. Will not run. Ciruit breaker was reset.


... Karcher PSI Electric Pressure Washer

Hot water function not working - Karcher K2.26 Electric Power Washer


... Karcher K2.26 Electric Power Washer

I have a Husky 2600 Psi 2.3 GPM Honda powered gas pressure washer. When i turn it on the motor runs fine, But when i squeeze the trigger the water is not pressurized when it comes out. How do i fix this problem?


... Honda Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1463 seconds