Having problems with your Karcher K 2.25 R Electric Pressure Washer ?

Karcher K 3.86 electric. Was working fine and

\015 Karcher K 3.86 electric. Was working fine and all of a sudden water started squirting all over the inside of the housing instead of out the hose. Hose, gun and filter are all clean and NOT clogged. Help!!!!Where can I get a perts list?\015

Answers :

It sounds like you have cracked part inside. Parts availability depends on were you live???
Repair Help & Product Troubleshooting for Karcher K 2.25 R Electric Pressure Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi, I have a one year old karcher k.2.360, which has worked fine up unitl now. However, when I tried to use for the first time in several months, the detergent feed doesn't work. The detrgent tank is full, and the detergent hose isn't blocked at the intake end - you can easily blow through the filter/trap. The pressure side works fine. Cheers, Nic


... Pressure Washers

When the patio cleaner is attached,the Karcher 5.68 pressure washer now keeps stopping and starting.It works fine on high pressure lance.It worked fine when bought from new a few days ago. We tried attaching the patio cleaner head to a larger machine with the same results.


... Karcher Pressure Washers

Ny Karcher 3050 power washer will work, but only sporadically. Works fine, then wont work at all for 3-5 minutes. Everything is hooked up correctly... I believe. Ideas, thanks. dave


Can be multiple issues loose wires at switch, is termo protect if overamps or pressure switch sticking ... Karcher K2.26 Electric Power Washer

Karcher 2.35. used it for about an hour, working fine. Suddenly motor stopped. Checked fuse and conections...all good but no go. Disconnected water hose and gave it a rest. As I was putting it away, connected to power and motor worked. Connected hose and motor won't work!! HELP! Thank you, Cliff Taylor


... Karcher Pressure Washers

Karcher K 3.86 electric. Was working fine and


It sounds like you have cracked part inside. Parts availability depends on were you live??? ... Karcher K 2.25 R Electric Pressure Washer

Karcher hds 500 c1 cold wash working fine but no hot wash


... Pressure Washers

Used my karcher hds 745 eco today was working fine for about 2 hours with breaks in between till the boiler stopped working could not hear it fire up, was at around 60c wot could be the problem , it had fuel


... Karcher Pressure Washers

I have a Karcher G2600 OR Pressure Washer, 2600 psi, 2.5 gpm. PN 1.194 506 0. gas engine works fine and water flows fine but pump is not adding pressure to stream. Checked and cleaned inlet water filter.


... Pressure Washers

I have a Karcher K5.86m pressure washer and the electric motor wont start. I've done the obvious like fuse in the plug etc. It was working fine one day, then got it out again and everything seems fine except the pressure pump wont start when I press the on button.


... Karcher Pressure Washers

Karcher B402 pressure washer Motor runs as soon as power supply connected, on/off switch does not seem to make a difference and no pressure at outlet? Was working fine, stopped for half an hour, came back and wouldn't work. Thanks Bob


Bob I had this happen to my Karcher, the pressure seals have blown. $Au200 for service and replacement from karcher dealer. tyhey would not sell the parts for a DFY ... Pressure Washers

My Karcher K5000G was working perfectly today but then it began to be slow reingaging the pump when I pressed the wand trigger. Then it stopped engaging completely. The motor runs fine but the pump doesn't engage. What could cause that and how can I fix it? Thanks for any help!!! Moxy


... Karcher Pressure Washers

Hi I have a karcher 360 thats working fine with everything from the water side of it but it has lost its pressure and only comes out like a hose, can you please advise of the problem...... Thanks Geoff


Check the pressure relief valve, it is stuck open and not letting pressure increase in the pump ... Karcher 2500 PSI Pressure Washer

GOT A KARCHER HDS755 BUT THE BURNER DOES NOT WORK.IT HAS FUEL GOING TO THE NOZZLE AND HEAPS OF SPARK.WHEN I OPERATE THE MACHINE WITH THE BURNER SWITCH ON AND FUEL LINE DISCONNECTE FROM NOZZLE,MACHINE WORKS FINE WITHOUT HOT WATER.WHEN RE CONNECTED,THE MACHINE WANTS TO CUT OUT.


Hi Please check your oil zzle is not blocked at all. Remove the burner head and renew the nozzle. If that fails you will need to check the fuel pressure from your fuel punmp which should be at least 9-10 bar. ... Pressure Washers

It's a Karcher presure washer K2.54, one and a half years old. Was working fine last time but when turned on now there is very little pressure through the hose and the water seems to be filling up inside and spurting out through the vent on the front


This sounds like the seals may have been damaged inside the pump or that the water inlet/outlet could be damaged. If you take off the front cover (use a star bit screw driver) then run the pressure washer you will be able to see were it is leaking fr ... Karcher Pressure Washers

Karcher 2.56 keeps pulsing on and off whenever high pressure nozzle is attached. I have tried different nozzles and same thing is happening. when i press the lance without any attachment it works fine


Make sure you have bled all air from the system. Also make sure you have sufficient water supply; if house water pressure is too low or if your hose is too long or doesn't allow full flow, you may not be getting enough water to the unit. ... Karcher Pressure Washers

Why doesnt my karcher 2.05 start all of a sudden, it worked fine a few days earlier


... Karcher FactoryReconditioned 1400 PSI 13 GPM Electric Pressure Washer K

Folks, I have a Karcher 5.55 home water blaster that pulses at the highest pressure on the vario power spray wand. It works fine on the lower pressure settings and with the rotary spray wand. I live in a temperate climate, depressurize and drain after each use, always prime the pump, have good water supply, cleaned the filter etc etc. Any pointers on to do or test next? Any help greatly appreciated.


... Karcher Pressure Washers

Pump on Karcher power washer not increasing pressure engine works fine


... Karcher Pressure Washers

I was using my Karcher 350M pressure washer working fine but it just stopped having tripped the power boards circuit breaker. The breaker now trips each time I switch on the washer. There is no smell of burnt motor and the electric did not get wet when last in use. Appreciate any suggestions or tests that can be made. I have a decent multimeter. Thanks.


... Karcher 1750 Psi Elec Pressure Washer

I recently bought a second hand karcher 205 it worked fine for the first couple of times then suddenly started leaking water


... Karcher Pressure Washers

I have a Karcher K3.91M pressure washer that pulsates when the trigger is released (off). It works fine when turned on, pressure seems OK. Before this started the unit would just turn off until I again wanted to use it. Is it a problem ? Correctable? All connections seem tight & I see no leakage.


... Karcher K 5.85 M Electric Pressure Washer

I have a Karcher 3500 hd with a 2.1 head. Machine has always worked well but lately it has been pulsating. High pressure then low... repeat. I have checked valves and they seem fine. Any advise would be great thx.


Sounds like your seals are going , they sell a rebuild kit for it and it is relatively easy to install ... Karcher G3025OH Pressure Washer

Karcher K 2.36 connected to t300 tracer no pressure for washing but with the dirt blaster still works fine. What could be the issue. I have also already installed the grey nozzles as requested on the instructions


... Karcher K2.26 Electric Power Washer

Karcher LR45005 pump continuously runs and will not build up pressure. Worked fine last weekend.


... Karcher Pressure Washers

The ge profile dishwasher model PDW8280J10SS was purchased about 2 yrs ago. It was working fine up until Jan. 2009. It ran fine but the water stopped draining. I read were you should run the garbage disposal prior to running the dishwasher. I drained the water and did this. It worked fine for a while then the problem was back. Once again, Drained all the water, sucked it out with a turkey baister, moved the dishwasher and checked hoses etc. Once again, it worked fine for about 10-14 runs. It now


It is probably clogged at the pump or before. See if you can get outlet hose off the bottom before the pump. ... GE 24 in. Profile PDW8280JSS Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1008 seconds