Having problems with your Karcher Pressure Washers ?

This is a Karcher 3000 psi unit with the Honda engine, after using it I saw emulsified oil all over the front just below the pump. I'm assuming a seal is gine but haven't torn into it yet. What's going on here?


Answers :

Your leaking oil from some ware and youshould find it before you ruin your pump
Repair Help & Product Troubleshooting for Karcher Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

This is a Karcher 3000 psi unit with the Honda engine, after using it I saw emulsified oil all over the front just below the pump. I'm assuming a seal is gine but haven't torn into it yet. What's going on here?


Your leaking oil from some ware and youshould find it before you ruin your pump ... Karcher Pressure Washers

Hi I went away on holiday and my dishwasher AEG 50800 was in perfect order. When I came back after three weeks it does not work. It was not in use while I was away so I don't get how come it is not working now .It does start up but its like the pump is just not kicking in. Ihear water running but the blades dont move and nothing seems to get washed, any ideas. Or is a new expensive pump my only option? My Husband seems to think a seal might have gone. Can a seal go while not in use? Thanks


It's worth looking under the machine. There is an overflow area with a float switch which sometimes fills up and it stops it working ... AEG Dishwashers

Dishwasher leaking my GE Natulus dishwasher is leaking from the bottom seal, Is the two pieces that are at the very bottom that hold the motor where the seal is? I'm not seeing a seal. I'm not sure if that is where it is leaking. I've got the thing torn apart so it is difficult for me to say where it is leaking. I'm going to give it a whirl. Don't know if the repair is worth the trouble. The GE dishwasher is only 7 years old. What is the avg life of a dishwasher. I'm sure it's not top of the lin


There is a front door seal that may be the issue. It seals along the door sides/top and continues under the door to seal the bottom surface when closed. Mine pulled out of the seal channel under the open door where you can't see it without a small mi ... GE Nautilus 24" Built-in Dishwasher

Does the pump seal go between the seal plate and motor


... Jackson 24 in. Delta 5 Free-standing Dishwasher

My dishwasher is leaking from underneath, front left as you look at it. If i go underneath it, there appears to be a seal on the outside (it does not appear to be the one that runs along the bottom of the inside of the dishwasher) that has come away at one point. Do you know a) how to get the front panel off (the bit that makes it look built in),b) how can i get another one of these seals. I assume if i get one we can just fit it into place. Many thanks, Robyn J


Hi,\012Here is a tip that I wrote about dishwashers and them leaking.Leaking Dishwasherheatman101\012\012\012p80897 ... Neff 24 in. S5453X1 Built-in Dishwasher

Nobel stainless dishwasher. water comes in but keeps pumping and does not go into cycle. for example, if we put the washer on towas dishes and leave it over night, in the morning it will still be pumping water into the machine.obviously it does not over fill because i am assuming it goes out the overflow. please help


Lookout the following things:\015\012\015\012\015\012\015\012\015\012\015\012\015\012Water-inlet valve\015\012\015\012The water-inlet valve lets water enter the machine. If this valve is defective, you need to completely rep ... Dishwashers

EDW5500DSS wont completely drain water Okay so now that my dishwasher runs, when it finishes a cycle it has a nice puddle of water at the bottom that never drains completely out. I am assuming its a relay or something because I looked for a floating switch (did not find), I can hear a pump sound as if it wants to pump the remaining water out, but, it doesn't. I really want to solve this problem soon so I can order the new door seal and needed part together. Checked the line out and of course i


The srainer over the pump could be clogged not letting the water drain quick enough. Be sure the screen is cleane out. I believe you would have already checked and cleaned this. I believe it is the impeller on the pump that pumps the water that is ei ... Dishwashers

My GSD5940Do1ss leaks from what appears to be a tube that is in the middle left of the underside. There are no leaks from the hoses or pumps. It only leaks when it is adding water during the wash or rinse cycle. The part it is leaking from looks like a plastic tube that is part of the tub enclosure. There are four of them and I think they are really the mounting guides for the tub enclosure, which means the water is probably flowing down the tub to this spot. I'm assuming that means my seal arou


Other than seals, and you're sure the hoses themselves are intact, i would suggest looking at the fitting for each hose... Are these hoses PEX, or just standard plastic tubing? ... GE 24 in. GSD5940 Built-in Dishwasher

My Asko 1502 Dishwasher has water drops coming out from the motor shaft where it is going in to pump assembly.Is there a seal I can buy and replace it to solve the problem? what is the remedy?


... Dishwashers

I have a Comet BXD 2525 G pressure washer pump which is giving me some problem. (Maybe) I hook the water up to pump and the pressure hose up to the pump, turn on the water and the water sprays out of the water connection at the pump. I check the hose to see if it was clog ok and the next was a the water connection ok. It's like the water is not going int the pump. When i start the pressure up the water come out of gun but no pump running like it should. The next thing i was going to look at i


The water inlet needs a gasket like all hose connections. If its gone the pump may be starving for water. ... Comet Pressure Washers

MAYTAG DISHWASHER, PUMP TO TUB SEAL REPLACMENT


... Dishwashers

Pressure Once I have the powerwasher started and going (water to it before starting) i can't get it to go to full pressure it will prime up like it's going to go to full pressure give me just a shot of full pressure then go back down to probably half pressure and remain there then prime again for a second then back a coninues cycle! Maybe there's a seal or something somewhere I should look at. Hose and pressure from house is good, the seal whee the hose attaches to the bottom of the washer is ne


This is usually a problem with the "dump valve" defective in not being able to hold the pressure but only able to release it prematurely as it should only do so when to much pressur is built up inline. Only recommend qualified pump tech. But check pu ... Coleman Pressure Washers

Whirlpool dishwasher doesn't seem to fill with enough water despite good water pressure. Therefore, pump sounds like it is cycling from pumping water for about 2 seconds to going dry for 2 seconds to pumping water for 2 seconds to going dry for 2 seconds, etc. Spray arms rotate only for the 2 seconds when pump is actually pumping water. Dishes do not get clean.


... Whirlpool 24 in. GU2548XTPS Built-in Dishwasher

I have a Jenn-Air JDB9910AWB dishwasher. The problem I am having is everything seems to work fine until the drain cycle. It sounds like the pump is frozen. After selecting the drain button you can hear a click in the control panel followed by a 1-2 second growl in the pump but it doesn't turn or pump. I am assuming the pump runs in reverse for draining? Is it safe to assume the pump is bad?


... Jenn-Air JDB9910 Dishwasher

I have removed the recirculation pump of my Neff S54m45x5GB/82 dishwasher from the casing and have got the sealing kit and a new pump as water was entering the pump as the seals where worn but now I seam to have difficulty reasembling the pump into the casing any tips


... Dishwashers

My Troy Bilt power washer (using Honda GCV160 engine) has no pressure coming from the pump. I checked the water flow, everything seems fine. I believe the pump needs oil added, however, I can't seem to firgure it out (how to add oil to the pump). I did notice that previously, I used to see drops of oil coming from under the pump. I I have a bad seal, can I add oil and test the pressure before I change the seal? Please advise.


I had a similar problem. Turns out I had left the hose disconnected and some sort of wasp built a paper type nest inside the washer tube that the hose connects to. I had to take the pump off and take apart and then cleaned it out with a screw driver. ... Honda Black Max 2600 PSI Pressure Washer

My Maytag model mdb9600aws motor shaft seal is leaking. How do I remove the seal and replace a new one. I am a novist, but I have taken the motor completely out and replaced the seal / gasket that the motor sits in, but there still is a leak. I am afraid the leak is going to destroy the motor as it has corrosion / salt like stuff about the motor. I have attempted to pry the shaft off with the use of 2 screw drivers. I was thinking since I am going to replace the whole motor shaft seal and chop


You are wise to realize the leak would destroy the motor.Take a close look at the diagram to see everything that gets placed on the motor shaft. That should give you a good idea what can/must be removed from that shaft. ... Maytag MDB9600A Jetclean II Built-in Dishwasher

How do I reinstall the pump seal? I have old KitchenAid KDS-16 dishwasher. The drain impeller failed and I purchased a new kit. Disassembled the pump. Installed the new pump seal but it does not hold water.


You may have tilted the seal when installing so take it apart again and make sure it is all the way down in its bed and it streight to the shaft . and looks centered then reinstall all other parts and try again .. mm h ... KitchenAid Dishwashers

Miele G 646 SC, Leaking.? My Miele G646SC is leaking, the red inlet/drain light is on and I suspect it may be one of the pump seals has perished. The machine is 11 yrs old and has never had a problem of any kind before. How do I gain access to the pumps to be able to change either the seals or if not, the complete pump ?


... Miele 24 in. G646SC Plus Free-Standing Dishwasher

I have a model 665.1576 or 1676 my paperwork does not have the number on it and no part number on he machine, but I ordered parts from the catalog which matched. about 7 years old, stopped draining, so I changed the Seal kit, pump base seal, impeller, plus drain cover gasket but not the pump gasket could not find it, reinstalled, pump works but much slower and times out, have to hit drain button to get all water out. Keith


... Kenmore Dishwashers

I have a Miele 24 in. G638 Plus Free-standing Dishwasher which is leaking into the pan underneath the machine (and triggering the polystyrene float switch) I am almost certain that the leak is coming from the main pump seal. Is it feasible to replace the seal (it looks like a major job to take the pump assembly apart). I guess Miele labor charges would make the repair not worthwhile Is there a service manual for this machine. I guess I would need it


Hi\015\012\015\012Please check the bellow link to have a detailed view regarding your query…..\015\012http://www.appliance-r ... Miele 24 in. G638 Plus Free-standing Dishwasher

Water Pressure Too Low in Washer -- Pump going bad?


Another posibility is the filter below the bottom jets has become clogged. My kids putting things in like chewing gum and broken glass did not help. I even had wood particles from the counter top in there. You do have to take a few layers of the rota ... Whirlpool GU2400XTPS Built-in Dishwasher

My dishwasher is leaking where the pump attaches to the bottom of the tub. From looking at the parts diagram, my guess is that thepump connector assembly has gone bad. The diagram is in clear how the connector attaches to the tub --- I don't see any seal or O-ring. Do you know what seals the pump connector assembly to the tub???


Hi,\012Here is a tip that I wrote about dishwashers and them leaking.Leaking Dishwasherheatman101\012\012zcbnvG ... GE 24 in. Profile PDW7800 Built-in Dishwasher

Pump still going. Dishwasher flooded last week and pump still going every time i switch it back on. I have left off for 3 days and I have tried the reset.


Check the following:\015\012\015\012You'll need to get the water out of the bottom of the dishwasher - a wet vac usually works the best.\015\012\015\012Remove the bottom rack and check the pump inlet screen in the bottom of th ... Dishwashers

My dishwasher only fills half way and it dosn't go through the wash cycle. It pumps the water out and then go to the rinse cycle but has the same problems with the water level. We have checked the motor, pump and the water valve. It seems to be working fine. Thought it might be the timer.


Hi,\015\012\015\012This is an issue with the wash motor..\015\012There are two motors,a wash motor and a drain pump/motor assy\015\012The wah motoe must have been the issue with the case.Changing the wash motor will solve your ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0956 seconds