Having problems with your Karcher Pressure Washers ?
What oil grade is correct for Karcher 620m pump?
Answers :
I don't know either. Anyone got an answer?
Repair Help & Product Troubleshooting for Karcher Pressure Washers
Tips for a great answer:
- Provide details, support with references or personal experience .- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
What oil grade is correct for Karcher 620m pump?
I don't know either. Anyone got an answer? ... Karcher Pressure Washers
I have a G 2400 HH-R and I need to replace the pump oil, I know I need Karcher Pump Oil 6.288-050.0 but I don't know HOW to drain and replace the oil. Thanks, Bill
... Honda Karcher G2400HH-R Pressure Washer
No pressure, the inlet filter is clean, all hoses and connections are tight, oil levels are correct, hose size to pump is correct with no kinks. Has the pump gone?
In this case it sounds as though either your unloader valve has failed, the water seals have failed or the check valves in the pump need replaced. Unfortunately there are no tests that can be done on this unit to verify which component has failed bec ... Karcher 4000 PSI 36 GPM Gas Pressure Washer G 4000 OH
My Karcher K3.48M pressure washer remains in the low pressure mode even when I return the pressure nozzle to the high pressure position. How can this be corrected. The pump seems to build up the pressure because when I release the handle the pump motor stops. This is a fairly new pump which was purchased in the latter part of last year(2010). Could this have been caused by the detergent I have been using which is an automotive shampoo? Please help I love this washer and for the times that I u
... Karcher PSI Electric Pressure Washer
HI, I have a Karcher Model K2400 and the pump stopped working. I took it apart and found the 'cheese head' screw had broken. there didn't appear to be any other problem with the pump so i am replacing the screw only. my question is how much pump oil should be put in the reservoir upon assembly as there doesn't appear to be a fill/drain plug?
... Karcher 2500 PSI Pressure Washer
Correct engine and pump oil for mi-t-m 2700 pressure washer?
... Mi T M WP-2700-4MHB Pressure Washer
Karcher K2.91 will not switch on unless you start on low pressure adjustable detergent lance had warranty claim for oil leak Can you tell me how mutch oil should be in pump ?
The oil in these pumps are factory filled and sealed, im not sure why there would be oil around the derergent lance... it sounds like your unloader valve/bypass valve is stuck and it takes a larger flow of water to activate it (as you get more flow o ... Karcher Pressure Washers
Karcher 620m runs but will not pump water - Karcher 2500 PSI Pressure Washer
The pump that connects to the motor could be bad/and or loose ... Karcher 2500 PSI Pressure Washer
What oil do I use in karcher 620m? - Karcher 4.550-620.0 pressure washer part 45506200/4.550-620.0
... Karcher 4.550-620.0 pressure washer part 45506200/4.550-620.0
How much oil goes into pump on a karcher 330m electric pressure washer????
... Karcher K2.26 Electric Power Washer
Karcher pressure washer k3 series oil level in pump
... Karcher 1.602-700.0 K3 Series Electric Pressure Washer
I have a Karcher model G 2401 HB and need to know what type of oil to use in pump ?
I fixed mine works good too, watch my video step by step i put it on youtube ... Karcher 2500 PSI Pressure Washer
How to put oil back into the Karcher water pump
You need to remove the pump and sit it brass side up before removing the bolts holding the brass to the aluminum part (you have to do it that way so the oil doesn't spill out.) CAUTION: there is some spring tension on the brass head. \015\012 ... Karcher 2500 PSI Pressure Washer
I WOULD LIKE TO KNOW, WHAT OIL TO USE FOR ANY KARCHER PUMP. Thanks. Richard V. Tucker
This depends on the brand of pump that you have, there are many different pump oils out there, getting the correct one is essential to increase the life of your pump. ... Karcher 2500 PSI Pressure Washer
When I power the Karcher 520M water pours from the handgun - there is now leak until pressure is applied. the pump does not cut out but I don't know if this is a problem with too much pressure causing the leak or too little pressure because of the leak. there does not seem to be a way to dismantle the handgun - is this correct Bill
Not too much pressure, a bad gun.Unfortunately you will have to replace the gun. About $65.00 Canadian ... Karcher 2500 PSI Pressure Washer
What lubricant to use for a Karcher pressure washer K5.670 pump piston? is it oil or silicon grease?
... Pressure Washers
Karcher 620m when I connect the water and connect it to the mains aswell , the pump does not kick but everything looks okay water pressure ect, But there is no sound for the motor. Can anybody help?
... Pressure Washers