Having problems with your Karcher Pressure Washers ?

Hi ive got a karcher k.3150 ive only had it 2 months and ive gone to use it the 3rd time and the detergent is not coming out of the container and ive done all checks-blockages etc and dont know why its not releasing the detergent?...the clear pipe is not sucking the detergent up when the machine is on and the lance is set to mix


Answers :

This seems strange, as it is under warranty you can take it back or contact them about the situation. It depends were you purchased the machine but if it is a manufacturers fault they will fix/replace it.
Repair Help & Product Troubleshooting for Karcher Pressure Washers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi ive got a karcher k.3150 ive only had it 2 months and ive gone to use it the 3rd time and the detergent is not coming out of the container and ive done all checks-blockages etc and dont know why its not releasing the detergent?...the clear pipe is not sucking the detergent up when the machine is on and the lance is set to mix


This seems strange, as it is under warranty you can take it back or contact them about the situation. It depends were you purchased the machine but if it is a manufacturers fault they will fix/replace it. ... Karcher Pressure Washers

Smeg gw3050 we have a new smeg dishwasher and we dont know where to put the acid detergent in


... Dishwashers

I have a ge nautilus dishwasher and i took the door panel off. Problem is the spring popped off the timer and I do not know how to put it back so that the cup closes that releases the detergent. My wife is upset and I need some type of help. A diagram anything I am searching the net but to no avail. Please help. Derrick


Hello Derrick,\015\012I learned a long time ago that a picture is worth a thousand words and that before attempting any repair, I typically take several digital shots as a backup and in case I forget where things went. I know that won't help yo ... Dishwashers

I have a Whirlpool Gold Quiet Partner III that is 8 years old and recently stopped cleaning top rack dishes. I remember finding a mylar like piece in the bottom of the tub and threw it away thinking it came off of something we washed (I know, bad thinking.) The mylar piece measured roughly 3-4inx2in and was folded in half. Anyways....the upper arm does not spin and the detergent doesnt get fully dispensed so dishes dont get fully cleaned. I am guessing not enough water pressure to upper arm. Wou


I'm having a similar issue. Are you sure the arm isn't moving at all?\015\012\015\012Generally what I'm finding is either you have a clog or the pump motor is bad.\015\012Hear is the service manual.\015\012 ... Dishwashers

Hotpoint Auqarius dishwasher. I have resentley moved house and reconnected the machine. it works through programme fine but is sometimes leaving dishes gritty and not quite clean. I have cleaned filters, arms etc dont know what else to do?


It sounds like there could be a gritty deposit in the bottom of the system. At the start of the cycle the unit takes in a set amount of water and recycles it around to the drying phase.\015\012\015\012Try and run the diswasher a few time ... Dishwashers

My dishwasher runs (Maytag Model DWU7910), but the detergent door doesn't release. Any ideas why? I've checked the seal and it's in tact, no debris surrounding/wedged in etc. Thanks in advance.


There is a small wax motor inside that does go bad over time and has to be replaced. It is what actually releases the latch to drop the soap. ... Kenmore 24 in. 16539 Built-in Dishwasher

Smeg dishwasher leaking through the door ive removed the lower door seal but dont know how it should go on happened all of a sudden and there was a desert spoon in the bottom of the dishwasher . im hoping it leaked because it dislodged the seal the seal came out easily from the outside of the dishwaser. can any one tell me how to replace it and which way it is supposed to sit model number sa425 smeg


... Dishwashers

KENMORE MODEL 665.749622 BUILT IN TYPE 577-0 WATER, HEAT, SOAP RELEASE WORKS. DONT KNOW ABOUT UPPER ARM. DISHES SUDDENLY NOT COMING CLEAN(PARTIAL)


... Kenmore Dishwashers

Hello! I have a Kenmore Dishwasher Model # 665.15805890. The dishwasher came with the house and I'm guessing it is around 10 years old. My toddler was having a great time flipping the door to the soap dispenser back and forth until he pulled the door off of the pin. Now, I can't seem to position the spring in a way so that the door will spring back. I never looked closely at the hinge before, so I don't know if that is the only reason the door will not release the detergent, or if something


Hi.Please see if the diagram here can help you. Check if the spring is that indicated with nr ten in diagram. ... Kenmore Dishwashers

I just bought a kenmore elite model # 13193 hooked it up ran it and it stopped mid cycle the detergent was released but not dissolved and the clean light keeps flashing. Ive reset it and turn up the water heater temp but still does the same thing.


You need to hand prime all new installs with a gallon of water first,Put it in then run cycle. ... Dishwashers

Operations manual Need to know where i can get a manual for my dishwasher as when we bought the house, one wasnt provided. Dont know what the cycles are all i know is how to turn it on and do a full cycle..dont know what the other buttons are for and I LOVE buttons...but...need to know what they are for


Get the model number from the dishwasher. Most brands have websites where you can find owners manuals and print them off. ... Dishwashers

The washing detergent is not released


Hi, I have this same unit and the same thing would happen to me too. I discovered that it was my dishes that were getting in the way of the detergent door. I'm sure you're are, but make sure that all your plates/bowls, etc, are pushed far enough back ... Haier HDP18PA Stainless Steel Free-Standing Dishwasher

Hi My dishwasher DS603 has a fault of F1 code beeping for the whole day. I have no clue that dont know how to do with it. It is not flooding however. I dont know if it has problem due to the water wasnt supplied this afternoon as the pipes are repairing outside. Now we got water supply back and it keeps beeping. i tried to dry it ALL UP but it still beeping. Please give me advice! cheers


... Fisher and Paykel 24 in. DS603H I Built-In Dishwasher

Hi My dishwasher DS603 has a fault of F1 code beeping for the whole day. I have no clue that dont know how to do with it. It is not flooding however. I dont know if it has problem due to the water wasnt supplied this afternoon as the pipes are repairing outside. Now we got water supply back and it keeps beeping. i tried to dry it ALL UP but it still beeping. Please give me advice! cheers


... Fisher and Paykel 24 in. DS603H I Built-In Dishwasher

Dishwasher compartment i am using an lg dishwasher for the first time and i dont have any manual there is two slot for the liquid to fill and i dont know which compartment is for which and i appreciate if u please let me know thanks


Pour right into the main opening( under the cap where you see the lever with 1,2,3.. the 2 slots are simply air holes... liquid will drain through..some bubles are normal. ... LG LDS4821WW 24 in. Built-in Dishwasher

The dishwasher gave a spark and gave up working. Ive checked the fuses etc what else should I look at? Ive also cleaned filters etc


Turn off the breaker\015\012take off the toe kick\015\012you should see a silver box\015\012thats your electrical connections\015\012take off the cover, 1/4 in nut\015\012inspect all your connections\015\012 this ... Dishwashers

Burning smell from our Dishwasher. I opened it up and found a little square brown thing attached to the motor - It has a terminal at one end that a white with a coloured stripe cable attaches to via a slip on terminal and 2 terminals to slot the little unit directly into the motor. Anyway, this little unit has obviously burnt out and this is the problem. Except my problem is that I dont know what this little unit is, so dont know what to ask for at the spare parts centre. Can anyone identify


... Bosch 24 in. SGS45E02 / SGS45E08 Exxcel Free-standing Dishwasher

The detergent door/lid does not open during the wash cycle. I don't know if there are issues with the unit not filling with water but sometimes when we open the detergent door the detergent has not gotten wet. Model SHX4AP05UC


... Bosch SHX4AP05UC Dishwasher

The dishwasher detergent is not dissolving. There is rinse aid in the dispenser - sometimes the door opens and the detergent comes out and sometimes it doesn't. If the detergent does come out then it is just sitting in the rack - should it drop to the bottom of the dishwasher? I have checked the door cleaned out around it to make sure the hook and release are working. I opened the door and the water is hot.


... LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher

The dishwasher detergent is running down the door all dishes are dirty and I tried washing without detergent and there is still detergent. Don't know where it is coming from. Brown water on dishes


... Asko 24 in. 1805 Built-in Dishwasher

The detergent dispenser [Main Wash] door doesn't stay closed. It seems like there is something wrong with the latch, but we can't what. We've cleaned it, but don't know what else to try. There don't seem to be pieces missing or broken. But no matter what, when we put in the detergent [we use the cubes] the door always just pops open and the detergent ends up falling to the bottom on the dishwasher. The dishes are still getting relatively clean, but we want to solve the problem with the door


... Frigidaire FDB1200RG 24 in. Built-in Dishwasher

Since purchasing my dishwasher last year I've constantly had intermittent problems regarding the detergent dispenser. It often does not open and therefore does not release the detergent into the wash...the detergent gets damp inside the dispenser and sticks....it often tumbles out when I open the dishwasher door at the end of the cycle.


I would replace the control board. Since the problem is intermittent this would indicate that the controller is not consistently sending voltage to the dispenser to open. ... Whirlpool GU2300XTSS Stainless Steel 24 in Builtin Dishwasher

Detergent door latch sticks closed not releasing the detergent


... Danby 17 in. DDW1802W Designer Series Built-in Dishwasher

We just moved in to a new house and the dishwasher's spinning piece was dismantled. We dont know how to set it up and we have a few different pieces that dont really match. please help! Thanks


Hi Lorainne.. You ,may be able to get the user manual at this link http://www.fisherpaykel.com/global/customer-care/product-manuals.cfm ... Fisher and Paykel Dishwashers

Maytag Dishwasher model Number DWU7802AAM. purchased 1996. We add detergent to the Main Wash cup and now it does not open to release the detergent during the wash cycle. Never had this problem before.


There is a small motor on the back of the cup, inside of the door. This is a wax motor. It is a small red plunger style motor with two electrical connections. If the mechanism is not worn or broken then the power to the motor needs to be ... Maytag Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0838 seconds