Having problems with your Kelvinator Dishwashers ?

INTENSIVE LIGHT KEEPS FLICKERING IT IS NOT OVERFILLED AND THERE IS NOT TOO MUCH INLET WATER


Answers :

Repair Help & Product Troubleshooting for Kelvinator Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

INTENSIVE LIGHT KEEPS FLICKERING IT IS NOT OVERFILLED AND THERE IS NOT TOO MUCH INLET WATER


... Kelvinator Dishwashers

Hi there, The error code 'strong and economy light flicker fleetly' is showing. the manual says that this means too much inlet water. We have drained the machine, cleaned waste pipe and tried to operate with a reduced flow from the inlet pipe but it's still not working. I filled the base of the dishwasher with water to see if it drains properly. It seems to be draining, but also leaking out of the base as well..? Any ideas?.


Hi The issue seems to be with the float switch assembly that is bad and should be replaced. Float assembly is found inside the dishwasher's tub, on the bottom. The water that ... Baumatic Dishwashers

Candy csd-68-80 all four lights on front panel lit, started flashing within few seconds of switching dishwasher on, no previous problems,dishwasher not overfilled, checked manual which said too much inlet water unsure what this means or how to check it. do all usual cleaning,salt,arms etc. had dishwasher about 14 months and use it every day never had any problem before


... Candy Dishwashers

Hi i have just purchased a hoover HEDS 668-80 dishwasher. Unit all plumbed in and salt rinse aide etc added. Go to turn unit on and all four lights flash with a alarm tone bleeping. The manual says - overfilled / too much inlet water. can anyone help with this problem as my dishes are now stacking up! many thanks jon


Turn down the house water valve. So not so much pressure is going through.If this doesn't help, which I believe it should, then I would take it back or have the water inlet valve on the machine checked to make sure it doesn't have a bad solenoi ... LG LDF6810 Built-in Dishwasher

Hi I have a Meile G 685SC Dishwasher. It has a water inlet problem. It will not fill and just keeps cycling through the water filling process with the water inlet light flashing. I have taken off the inlet pipe and removed and cleaned the inlet filter and washer and put them back. The filter was blocked with a sand like substance. I have taken apart the antiflood valve also attached to the inlet pipe but it is gel sealed so unserviceable. The inlet pipe itself on removing from the vlave appears


Check that the stopcock is opened fully or whether the water inlet hose\015\012is kinked...Check that the water inlet filter is not clogged and clean\015\012it, if necessary, as described in the operating instructions....Check\015\012that the drain p ... Miele 24 in. Incognito G643SCVI Built-in Dishwasher

Water inlet I have a miele dishwasher and water keeps collecting in the bottom tray which in turn makes the water inlet light come on and stops the dishwasher from working. i have drained the water out of the bottom tray which makes everything work again but how can i stop this from happening as it seems to happen on a weekly basis. thanks


It sounds like there is either a kink in your drain hose or your garbage disposal is blocked up where the dishwasher drain is connected ... Dishwashers

Got a hoover hed 6612/80 been working fine today all four lights flashing and beeping. manual says too much water inlet. one soltion on here says to check water inlet sensor. How do i do this. please help.


... Hoover Dishwashers

I have an ADP6000IX Whirlpool dishwasher which is comming up with a Fault code Err4. The manual indicates overfilled and possible cause "too much inlet water", however there is no water sitting in base of machine, and have unloaded all dishes and Err4 still comes up. I have switched unit on and off at wall but has not re-set. I have disconnected water pipe from tap and reconnected.Is there anything further I can do?


Hi, \015\012\015\012You can solve this by cleaning and de-greasing the filter frame, basket and sensor Also there might be a low threshold for oils/greases/debris of any kind, so you have to rinse and load. By removing outflow tube ... Whirlpool Dishwashers

Our Asko D1796 dishwasher has all lights flashing and is displaying a F2 message, which according to the good book means there is too much water in the machine. I have followed the instructions for a normal inlet time but the indicators will not change. Is it trying to tell me the Drain Pump is dead? A new drain pump was fitted three years ago. There is no eidence of water in the machine. Can anyone help? Thanks. Alan


Hi Alan,\015\012\015\012The F2 on Asko means it's sensed an overfill, that in itself though can be provoked by a couple of thing's. First, check for blockage at the end of the drain hose where it connect's to your household plumbing, be it under the ... Asko D1796FI Built-in Dishwasher

The water inlet light keeps flashing and machine will not work. I have checked the inlet filter and it's clear. Miele Classic Turbothermic Plus - G885


Hi\015\012\015\012 \015\012\015\012If you are sure that the water inlet valve is fine then you\015\012can also test it with an ohmmeter & verify its reading. If the issue is not\015\012resolved then check the float/pressure switc ... Miele Dishwashers

Dishwasher error Hi we have a Andi dishwasher with an error mess E4 which means its ''Overfilled'' Too much inlet water... There is no water in the machine, how do we solve this? Any ideas would be great. Cheers, Matt & Michele


... Dishwashers

How to fixerr 4 its saying overfilled. to much inlet water


Hi\015\012\015\012 \015\012\015\012Thanks for\015\012using FixYa. If the dishwasher is overfilling it's caused\015\012because of water-inle ... Whirlpool Dishwashers

Candy dishwasher model csd68-80 all four lights on simultaneeously according to book too much inlet water but it is draining freely


... Candy Dishwashers

Hoover dishwasher model HED 6612/1-80. Has all lights lit up and beeping. Error code in manuel says "too much inlet water" What does this mean and how can i correct this. Thank you


... Hoover Dishwashers

I have a bosch sgs53c12 dishwasher and the water light keeps comming on after about 20 seconds into a programme. I have switched it off and on, reset it and checked the inlet hose where it connects to the external pipe. It just sits there humming to itself. any ideas? help!!


Hello- Bosch installed an anti-flood device in bottom of unit. If water gets into this area ( from a leak, usually). To get water out, tip backwards, then forward. Use a couple of towels- water should come out. Common problem with these units. Let me ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

Have installed a new heating element into the idw604 dishwaster - but now an (E4- overfilled)problem has occured possible cause "too much inlet water" any suggestion on how to solve this problem ?


Replace water valae ... Belling 24 in. IDW603 Built-in Dishwasher

Miele g1173 keeps beeping waster inlet light lit water in bottom of machine not draining properly please help


... Dishwashers

Jmb dishwasher the intensive light keeps flashing during programme and stopping the dishwasher ,i have looked in the manual and it says there is to much inlet water/overfilled ,how can i fix it myself


... Dishwashers

Flashing light The 3rd light to the right keeps flashing. I cannot cancel the programme or move the indicator light to any other setting. When I close the door the machine does not come on, just the light keeps flashing. Any idea what the problem can be? There is no water in the machine and doesnt appear to be any blockage in the outlet pipe.


... Smeg 24 in. DWI612 Built-in Dishwasher

Hi i have a asko dishwasher the water will not enter the washer and the drain pump keeps going i have clecked the filer in the inlet do you think it could be water in the base lifting the float stopping the water inlet if so how do you drail the water out from the float? the model is d1706 thanks brian


Check this solution ... Asko 24 in. D3250 Built-in Dishwasher

Dishwasher Water is not going through upper and lower spray arms. Checked overfill protector switch, inlet valve, inlet valve screen, pump blades move freely, Pumb motor is working , Water enters into machine but does not go throught spray arms. Water heats up, Machine will go through all cycles but without water going through spray arms. 650 / 690 series gldb656jso


... Dishwashers

The water inlet valve dose not work, therefor the machin can not start. The inlet water signal light is off, however I checked the water pressure that was ok, also there is a noise in the valve. Is the valve is damaged???


Hello,Welcome to FixYa. ... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

Water inlet valve the machine wont fill with water. checked all hoses, but water inlet valve ma;y be sensitive how much are they to replace. could this be the problem?


A water valve is anywhere from 15$ to 43$ depending on make and model ... Dishwashers

My bosch excel dishwasher has the following fault: start the cycle, water starts to fill but then check water light comes on and it then starts to empty again. Pump then keeps going. I have checked the hose and even swapped it round with my washing machine one but this makes no difference. I have cleaned all the filters and taken off the cover to check the 'propeller' as sugested in the instruction manual. But no joy - check water light still illuminated and willnot continue with cycle. - Help!!


This unit im sure has a water flowmeter that measures the water intake.. if this cannot read then the unit shuts down to avoid flooding.. \015\012it needs replacing... it is attached between the valve and the side tank or attached to the tank d ... Bosch Dishwashers

I have an LG dishwasher that keeps giving an 1E error code. The code means water inlet trouble and recommends the following. Check clogging of water inlet hose(or hose twist or freezing) Check if it's suspension of water supply The problem doesn't seem to be either. ?


Try replacing the water inlet solenoid valve (it may have an open coil). The water line goes directly to it. ... LG 24 in. LDS 5811ST Stainless Steel Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1220 seconds